MATEC Web Conf.
Volume 157, 2018Machine Modelling and Simulations 2017 (MMS 2017)
|Number of page(s)||8|
|Section||Physical and chemical properties of materials|
|Published online||14 March 2018|
Use of waste materials in rubber matrix
Alexander Dubček University of Trenčín, Faculty of Industrial Technologies in Púchov, I. Krasku 941/30, 020 01 Púchov, Slovak Republic
* Corresponding author: firstname.lastname@example.org
The presented paper deals with the use of waste materials as ecological fillers into rubber matrix. Waste materials were used as partial replacement of the commercial filler – carbon black, designated as N339. These prepared rubber compounds were characterized on the basis of the rheology and vulcanization characteristics – minimum torque (ML), maximum torque (MH), optimum time of vulcanization (t(c90)), processing safety of compound (ts), rate coefficient of vulcanization (Rv). In the case of the prepared vulcanizates, physical-mechanical properties (tensile strength, tensibility and hardness) and dynamic-mechanical properties (storage modulus, loss modulus, loss angle tan δ) were investigated. Using the dependency of loss angle on temperature, the selected properties for tyre tread vulcanizates were evaluated, including traction on snow and ice, traction on the wet surface and rolling resistance.
Key words: waste materials / filler / physical-mechanical properties / dynamic-mechanical properties
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.