Open Access
Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
---|---|---|
Article Number | 03004 | |
Number of page(s) | 11 | |
Section | Machine dynamics and multibody systems simulations | |
DOI | https://doi.org/10.1051/matecconf/201815703004 | |
Published online | 14 March 2018 |
- M. Bogdevicius, R. Zygiene, G. Bureika, S. Dalydka, An analytical mathematical method for calculation of the dynamic wheel-rail impact force caused by wheel flat. Vehicle System Dynamics 5, 689-705 (2016) [CrossRef] [Google Scholar]
- J. Dižo, S. Steišūnas, M. Blatnický, Dynamic analysis of motion smoothness of rail vehicle with wheel-flat. Proceedings of 22nd International conference “Current problems in rail vehicles – PRORAIL 2015” I 22, 83-92 (2015) [Google Scholar]
- J. Galliková, R. Poprocký, P. Volna, Implementation of FMEA method in maintenance of semi-trailer combination. Diagnostyka 4, 85-92 (2016) [Google Scholar]
- EN 12299:2009, Railway Applications – Ride Comfort for Passengers – Measurement and Evaluation. European Committee for Standardization, Brussels (2009) [Google Scholar]
- J. Gerlici, Comfort for passenger of rail vehicle assessment. Advanced methods in computational and experimental mechanics, 141-172 (2013) [Google Scholar]
- Z. Ondrová, J. Gerlici, T. Lack, Comfort for passengers of railway vehicle analysis. Proceedings of 7th European conference of young research and science workers “TRANSCOM 2007” 7, 205-210 (2007) [Google Scholar]
- J. Gerlici, T. Lack, J. Harušinec, Realistic simulation of railway operation on the RAILBCOT test stand. Applied mechanics and materials 486, 387-395 (2014) [CrossRef] [Google Scholar]
- J. Gerlici, M. Gorbunov, K. Kravchenko, A. Kostyukevich, O. Nozhenko, T. Lack, Experimental Rigs for Wheel/Rail Contact research. Manufacturing Technology 5, 909-916 (2016) [Google Scholar]
- J. Gerlici, T. Lack, Rail vehicles brake components test bench utilisation. Applied mechanics and materials 486, 379-386 (2014) [CrossRef] [Google Scholar]
- S. Dailydka, S. Naimovičius, V. Lingaitis, Analysis of passenger vibration comfort in a train. Transport Means – Proceedings of the International Conference, International Conference Transport Means 2012, Kaunas, Lithuania 16, 302-305 (2012) [Google Scholar]
- V. Hauser, O. Nozhenko, K. Kravchenko, M. Loulová, J. Gerlici, T. Lack, Impact of three axle boxes bogie to the tram behavior when passing curved track. Procedia Engineering 192, 295-300 (2017) [CrossRef] [Google Scholar]
- T. Lack, J. Gerlici, Vehicles Dynamical Properties Analysis from the Point of View of Comfort for Passengers. Archives of Transport 1-2, 91-110. (2007) [Google Scholar]
- T. Lack, J. Gerlici, Analysis of Vehicles Dynamic Properties from the Point of View of Passenger Comfort. Komunikacie 2, 10-18 (2008) [Google Scholar]
- M. Maňurová, A. Suchánek, The analysis of a rail vehicle with a tilting bogie. Manufacturing Technology 5, 1020-1027 (2016) [Google Scholar]
- P. Št’astniak, J. Harušinec, Computer aided simulation analysis for computation of modal analysis of the freight wagon. Komunikacie 4, 73-79 (2013) [Google Scholar]
- M. Kostrzewski, R. Mełnik, Numerical dynamics study of a rail vehicle with differential gears. Procedia Engineering 192, 439-444 (2017) [CrossRef] [Google Scholar]
- P. Hejma, M. Svoboda, J. Kampo, J. Soukup, Analytic Analysis of a Cam Mechanism. Procedia Engineering 177, 3-10 (2017) [Google Scholar]
- F. Klimenda, J. Soukup, Modal analysis of thin aluminium plate. Procedia Engineering 177, 11-16 (2017) [CrossRef] [Google Scholar]
- P. Baran, M. Brezáni, P. Kukuča, P. Šťastniak, Basic dynamical analysis and comparison of balancing systems of non-conventional piston machine FIK. Procedia Engineering 192, 34-39 (2017) [CrossRef] [Google Scholar]
- V. Baniari, M. Blatnická, M. Šajgalík, M. Vaško, M. Sága, Measurement and numerical analyses of residual stress distribution near weld joint. Procedia Engineering 192, 22-27 (2017) [CrossRef] [Google Scholar]
- A. Sapietová, J. Bukovan, M. Sapieta, L. Jakubovičová, Analysis and implementation of input load effects on an air compressor piston in MSC.ADAMS. Procedia Engineering 177, 554-561 (2017) [CrossRef] [Google Scholar]
- A. Sapietová, L. Gajdoš, V. Dekýš, M. Sapieta, Analysis of the influence of input function contact parameters of the impact force process in the MSC.ADAMS. Advanced mechatronics solutions 393, 243-253 (2015) [Google Scholar]
- R. Labuda, D. Barta, A. Kovalčík, Effective use of the braking effect of vehicle drivetrain at deceleration. Proceedings of XLI. International scientific conference of Czech and Slovak university departments and institutions dealing with the research of internal combustion engines “KOKA 2010“ 41, 206-211 (2010) [Google Scholar]
- P. Kopas, L. Jakubovičová, M. Vaško, M. Handrik, Fatigue resistance of reinforcing steel bars. Procedia Engineering 136, 193-197 (2016) [CrossRef] [Google Scholar]
- J. Gerlici, T. Lack, Modified HHT method for vehicle vibration analysis in time domain utilisation. Applied mechanics and materials 486, 396-405 (2014) [CrossRef] [Google Scholar]
- Gerlici, T. Lack, Contact geometry influence on the rail/wheel surface stress distribution. Procedia Engineering 1, 2249-2257 (2010) [CrossRef] [Google Scholar]
- J. Gerlici, T. Lack, Railway wheel and rail head profiles development based on the geometric characteristics shapes. Wear 1-2, 246-258 (2011). [Google Scholar]
- T. Lack, J.Gerlici, A modified strip method to speed up the calculation of tangential stress between wheel and rail. Applied mechanics and materials 486, 371-378 (2014) [CrossRef] [Google Scholar]
- T. Lack, J. Gerlici, A modified strip method to speed up the calculation of normal stress between wheel and rail. Applied mechanics and materials 486, 359-370 (2014) [CrossRef] [Google Scholar]
- J. Dižo, S. Steišūnas, M. Blatnický, Simulation Analysis of the Effects of a rail Vehicle Running with Wheel Flat. Manufacturing Technology 5, 889-896 (2016) [Google Scholar]
- J. Bian, G. Yuantong, M.H. Murray, A Dynamic wheel-rail impact analysis of railway track under wheel flat by finite element analysis. Vehicle System Dynamics 6, 784-797 (2013) [CrossRef] [Google Scholar]
- M. Pawełczyk, P. Lesiak, R. Podsiadło, Simulation study of the 4-axle wagon damaging impact on the track caused by some deformations on the wheel. Proceedings of 22nd International conference “Current problems in rail vehicles – PRORAIL 2015” II 22, 115-125 (2015) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.