| Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
|---|---|---|
| Article Number | 02016 | |
| Number of page(s) | 12 | |
| Section | Modelling and simulation, structural optimization | |
| DOI | https://doi.org/10.1051/matecconf/201815702016 | |
| Published online | 14 March 2018 | |
Experimental and computational comparative study of the specimens loaded by bending and torsion
University of Žilina, Faculty of Mechanical Engineering, Department of Applied Mechanics, Univerzitná 8215/1, Žilina, Slovakia
* Corresponding author: lenka.jakubovicova@fstroj.uniza.sk
The article presents the theoretical and computational analysis of the fatigue tested specimens loaded by bending and torsion. The testing device allows loading by constant turn of the clamping parts. The stress and strain magnitude in test depends on the material characteristics and shape of the specimen. The calculations are realized by finite element method (FEM). The obtained results are verified with the experimental measurement applying the optical system ARAMIS.
Key words: bending / torsion / calibration curve / Finite Element Method (FEM) / optical system ARAMIS / ADINA
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.