Open Access
| Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
|---|---|---|
| Article Number | 07003 | |
| Number of page(s) | 9 | |
| Section | Physical and chemical properties of materials | |
| DOI | https://doi.org/10.1051/matecconf/201815707003 | |
| Published online | 14 March 2018 | |
- H.N. Girisha, K.V. Sharma, Influence Of Ageing Heat Treatment And Magnesium On Wear And Corrosion Characteristics Of Aluminium Copper Alloy. International Journal of Engineering Research & Technology 2 (8), 1702-1706 (2013) [Google Scholar]
- S.K. Shaha, F. Czerwinski, W. Kasprzak, J. Friedman, D.L. Chen, Ageing characteristics and high-temperature tensile properties of Al.Si.Cu.Mg alloys with micro-additions of Cr, Ti, V and Zr. Materials Science & Engineering A652, 353-364 (2016) [CrossRef] [Google Scholar]
- H.R. Ammar, A.M. Samuel, F.H. Samuel, Porosity and the fatigue behavior of hypoeutectic and hypereutectic aluminum&silicon casting alloys. International Journal of Fatigue 30, 1024-1035 (2008) [CrossRef] [Google Scholar]
- P. Pucher, H. Böttcher, H. Kaufmann, H. Antrekowitsch, P.J. Uggowitzer, Mechanical properties and casting characteristics of the secondary aluminium alloy AlSi9Cu3(Fe) (A226). The Minerals, Metals and Materials Society 2, 237-244 (2011) [Google Scholar]
- L. Palyga, M. Stachowicz, K. Granat, Influence of High-presure-die-casting second stage parameter on structure of AlSi9Cu3(Fe) alloy. Manufacturing technology 16 (2), 410-416 (2016) [Google Scholar]
- C. Lee, J. Youn, Y. Lee, Y. Kim, Effect of eutectic Si particles on the defect susceptibility of tensile properties to microporosity variation in Al-xSi binary alloys. Materials Science & Engineering A 678, 227-234 (2016) [CrossRef] [Google Scholar]
- K. Bangyikhan, Effects of oxide film, Fe-rich phase, porosity and their interactions on tensile properties of cast Al-Si-Mg alloys. PhD. Thesis, 2015. [Google Scholar]
- G. Nicoletto, R. Konečna, P. Baicchi, V. Majerova, Casting porosity and long-life fatigue strength of a cast Al-alloy. In: Procs. Int. Conf. MSMF 5, Brno, Czech Republic; 2007. [Google Scholar]
- J.A. Eady, D.M. Smith, The effect of porosity on the tensile properties of aluminium alloy castings. Mat. Foum 9 (4), 217-223 (1986) [Google Scholar]
- E. Fiorese, F. Bonollo, G. Timelli, L. Arnberg, E. Gariboldi, New classification of defects and imperfections for aluminium alloy castings. International Journal of Metalcasting 9 (1), 55-66 (2015) [CrossRef] [Google Scholar]
- F. Bonolo, G. Timlli, E. Fiorese, E. Gariboldi, P. Parona, L. Arnberg, New Quality and design standards fo aluminium alloys cast products - Database on Defects, (2013) [Google Scholar]
- D.P.K. Singh, D.J. Mitchell, An Improved Technique for Minimising Turbulence and Particle Stimulation During Molten Metal Delivery into Furnaces, Technical Report RDD-01-06, Ford Motor Company (2001) [Google Scholar]
- P. Palček, M. Chalupová, G. Nicoletto, O. Bokůvka, Prediction of machine element durability, Education Aid for multimedia lectures. CETRA 177 (2003) [Google Scholar]
- O. Bokůvka, M. Jambor, F. Nový, L. Trško, J. Lago, Influence of long-term heating on th fatigue properties of low-alloyed cast steel STN 42 2707, Production Engineering archives 12 (3), 30-33 (2016) [CrossRef] [Google Scholar]
- STN EN ISO 6892-1:2010, Metallic materials. Tensile testing. Part 1: Method of test at ambient temperature. [Google Scholar]
- STN EN ISO 6506-1, Metallic materials. Brinell hardnes measurements. Part 1: Method of test at ambient temperature. [Google Scholar]
- P. Skočovský, P. Benko, A. Vaško, Quantitative appreciation of structure and fracture surface of casting materials. Proccedings of Advanced manufacturing and repair technologies in vehicle industry, Zielona Góra - Łagów, Poland, 51-55 (2000) [Google Scholar]
- Y. Murakami, Inclusion Rating by Statistics of Extreme Values and Its Application to Fatigue Strength Prediction and Quality Control of Materials. Journal of Research of the National Institute of Standards and Technology 99 (4), 345-351 (1994) [CrossRef] [Google Scholar]
- S. Fintova, R. Konečná, G. Nicoletto, Statistical description of largest pore size in modified Al-Si alloys. Materials Engineering 16 (3), 24-28 (2009) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.