Open Access
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
Article Number 04003
Number of page(s) 11
Section Advanced industrial, automotive and green energy applications
Published online 14 March 2018
  1. J. Hromádko, Speciální spalovací motory. (Česká zemědělská univerzita, Praha, 1. vyd., 151 p., ISBN 978-80-213-2168-7, 2011) [Google Scholar]
  2. C. Lloyd, A low temperature differential Stirling engine for power generation. Cantebury. Master’s Thesis. University of Canterbury. Department of Electrical and Computer, available at: (2009) [Google Scholar]
  3. J. Blaha, Stirlingův motor. 80 p., Vysoké učení technické v Brně. Fakulta strojního inženýrství. Ústav automobilního a dopravního inženýrství. Vedoucí diplomové práce doc. Ing. Zdeněk KAPLAN, CSc. (2008) [Google Scholar]
  4. Kongtragool, Bancha a Somchai WONGWISES, A review of solar-powered Stirling engines and low temperature differential Stirling engines. Renewable and Sustainable Energy Reviews [online] 7 (2), 131-154 [seen 22.3.2015]. DOI: 10.1016/s1364-0321(02)00053-9, ISSN 1364-0321, Available at: (2003) [CrossRef] [Google Scholar]
  5. D.G. Thombare, S.K. Verma, Technological development in the Stirling cycle engines. Renewable and Sustainable Energy Reviews [online] 12 (1), 1-38 [seen 2015-03-22] DOI: 10.1016/j.rser.2006.07.001. ISSN 13640321. Available at: (2008) [CrossRef] [Google Scholar]
  6. Autodesk Inc. ©2015, 3D CAD Sotware: Inventor 3D CAD, Autodesk: 3D Design, Engineering & Entertainment Software. [online] [seen 2015-04-22] Available at: (2015) [Google Scholar]
  7. C. Chua, K. Leong, C. Lim, Rapid prototyping: principles and applications. (New Jersey: Word Scientific, ©2010, p. XXV, 512 p. 8. MCAE SYSTEMS, spol. s.r.o., Kuřim, ČR. Dimension uPrint (2010) [Google Scholar]
  8. J. Sedlak, D. Rican, M. Piska, Study of Materials Produced by Powder Metallurgy Using Classical and Modern Additive Laser Technology. Procedia Engineering 2015 (1), 1232-1241, ISSN 1877-7058 (2015) [CrossRef] [Google Scholar]
  9. J. Sedlak, M. Ptackova, J. Nejedly, M. Madaj, J. Dvoracek, J. Zouhar, M. Piska Material Analysis of Titanium Alloy Produced by Direct Metal Laser Sintering. International Journal of Metal Casting 7 (2), 43-50, ISSN 1939-5981 (2013) [CrossRef] [Google Scholar]
  10. J. Novak-Marcincin, M. Janak, L. Novakova-Marcincinova, Increasing of Product Duality Produced by Rapid Prototyping Technology. Manufacturing Technology 12 (12), 71-75, ISSN 1213-2489 (2012) [Google Scholar]
  11. J. Sedlak, M. Slany, Z. Fiala, A. Jaros, Production Method of Implant Prototype of Knee-Joint Femoral Component. Manufacturing Technology 15 (2), 195-204, ISSN 1213-2489 (2015) [Google Scholar]
  12. Ch. Ch. Kuo, L. Ch. Liu, W. F. Teng, H. Y. Chang, F. M. Chien, S. J. Liao, W. F. Kuo, Ch. M. Chen, Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications. Composites Part B: Engineering 86, 36-39. DOI: 10.1016/j.compositesb.2015.10.005. ISSN 1359-8368. Available at: (2016) [Google Scholar]
  13. uPrint SE. Stratasys Ltd. [online] [seen 2015-05-17] Available at: (2015) [Google Scholar]
  14. FDM Technology. Stratasys Ltd. [online] [seen 2015-05-17] Available at: (2015) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.