| Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
|---|---|---|
| Article Number | 05004 | |
| Number of page(s) | 6 | |
| Section | Experimental mechanics, identification and validation | |
| DOI | https://doi.org/10.1051/matecconf/201815705004 | |
| Published online | 14 March 2018 | |
Examples of modern methods of measuring deformations
Institute of Mechanics and Machine Design Foundations, Czestochowa University of Technology, Dabrowskiego 73, 42-200 Częstochowa, Poland, EU
* Corresponding author: domanski@imipkm.pcz.pl
The work presents examples of possibilities created by multi-unit 3D correlation system. Experience is the non-contact measurement of displacement and strains of slender compression bars or tensile samples. Experimental research show that as a result of axial compression of slender elements with the length substantially exceeding the cross-sectional dimensions, element destruction occurs at loads less than the respective compressive strength, resulting in deformation of the object. We present the results of numerical analysis, compared with exercise of carrying on a test bench.
Key words: image correlation system / strains / deformations
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.