Open Access
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
Article Number 01005
Number of page(s) 8
Section Methods and systems in machine design
Published online 14 March 2018
  1. C. A. Griffiths, Closing the Loop on Product Integrity on Bearings with Engineered Source Approval. (Split Ballbearing Features, Company Newsletter, 1989) [Google Scholar]
  2. N. Ganev, I. Kraus, X-ray diffraction measurement of residual stresses. Material Structure 9 (2), (2002) [Google Scholar]
  3. K. Tiitto, et al., Testing Shot Peening Stresses in the Field. The Shot Peener 4, ISSN 1069-2010 (1991) [Google Scholar]
  4. R. Cep, J. Petru, T. Zlamal, J. Valicek, M. Harnicarova, A. Janasek, L. Cepova, Influence of feed speed on machined surface quality. 22nd International Conference on Metallurgy and Materials, Conference proceedings, ISBN 978-808729441-3, 1033-1038 (2013) [Google Scholar]
  5. Z. Pala, K. Kolarik, N. Ganev, J. Capek, Study of residual stress surface distribution on laser welded steel sheets. on 51st Annual of the International Scientific Conference on Experimental Stress Analysis, EAN (2013) [Google Scholar]
  6. M. Handrik, P. Kopas, V. Baniari, M. Vaško, M. Sága, Analysis of stress and strain of fatigue specimens localised in the cross-sectional area of the gauge section testing on bi-axial fatigue machine loaded in the high-cycle fatigue region. Procedia Engineering 177, 516-519 (2017) [CrossRef] [Google Scholar]
  7. P. S. Prevéy, X-ray Diffraction Residual Stress Techniques. Metals Handbook 10, Metals Park: American Society for Metals, p. 380-392 (1986) [Google Scholar]
  8. M. E. Fitzpatrick,, Determination of Residual Stresses by X-ray Diffraction. Measurement Good Practice 52, National Physical Laboratory, Teddlingtoon [Google Scholar]
  9. A. Czan, M. Sajgalik, A. Martikan, V. Kuzdak, Identification of residual stress and structure properties in surface and subsurface layers of austenitic steel designed for nuclear energetics. EAN 2015 – 53rd Conference on Experimental Stress Analysis, 36-40, ISBN 978-800105734-6 (2015) [Google Scholar]
  10. M. Brezina, L. Kupca, Stress corrosion cracking of austenitic stainless steel in a nuclear power plant enviroment. Enviroment inducted cracking of materials. Department of Structural Analysis, VUJE Inc, Trnava, 431-436 (2008) [CrossRef] [Google Scholar]
  11. A. Gorog, D. Stancekova, M. Kapustova, I. Gorogova, I. Miturska, Influence of Selected Cutting Conditions on Cutting Forces. Advances In Science And Technology-Research Journal 11 (1), 179-185, ISSN 2299-8624 [Google Scholar]
  12. A. Czan, E. Tillova, J. Semcer, J. Pilc, Surface and subsurface residual stresses after machining and their analysis by X-ray diffraction. Comunications 15 (2), 69-76 (2013) [Google Scholar]
  13. D. Mital, J. Zajac, Z. Mitalova, Monitoring influence of selected parameters on surface quality after polymer powder coating. MM Science Journal 2016 (October), 1077-1081 (2016) [Google Scholar]
  14. N. Náprstková, F. Holešovský, Admeasurement of Grinding Wheel Loss at FPTM. 24th International Colloquium (Advanced manufacturing and repair technologies), 159-164, ISBN 978-80-7194-962-6 (2007) [Google Scholar]
  15. P. Martikan, M. Drbul, J. Holubjak, J. Mrazik, R. Joch, The Issue of Determining the Geometric Position Deviation of the Threaded Holes. Advances in Science and Technology-Research J. 10 (32), 47-52 (2016) [CrossRef] [Google Scholar]
  16. R. Cep, A. Janasek, J. Petru, L. Cepova, A. Czan, J. Valicek, Hard Machinable Machining of Cobalt-based Superalloy. Manufacturing Technology XIII (13), UJEP: Ústi n. Labem, 226-231, ISSN 1213-2489 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.