MATEC Web Conf.
Volume 157, 2018Machine Modelling and Simulations 2017 (MMS 2017)
|Number of page(s)||7|
|Section||Experimental mechanics, identification and validation|
|Published online||14 March 2018|
Utility of an unitary-shredding method to evaluate the conditions and selection of constructional features during grinding
Faculty of Mathematics, Physics & Technical Science, Kazimierz Wielki University in Bydgoszcz, Poland
2 Faulty of Mechanical Engineering, UTP University of Science and Technology, Bydgoszcz, Poland
* Corresponding author: firstname.lastname@example.org
In order to evaluate and improve the efficiency of the process of grinding, various investigations are conducted, based on the relevant research methodology. One of them is the method in which the crushed sample is subjected to single stroke loads. On this basis, the influence of the geometric features of the chipper system and the dynamic process on the efficiency of the grinding is determined. Charpy hammers instrument were used to perform these modifications so that the momentary force of the resistance could be recorded with varying sample alignment, blade geometry changes and others. In addition, it was proposed to use a super fast camera (up to 1200 fps) to record the deformation of the sample and its destruction, in order to interpretation the burdens there. Under such idealized conditions, a range of variables has been identified that significantly affect the reduction of energy demand during grinding.
Key words: shredding / constructional features / breaking up / energy efficiency
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.