Open Access
Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
---|---|---|
Article Number | 02053 | |
Number of page(s) | 12 | |
Section | Modelling and simulation, structural optimization | |
DOI | https://doi.org/10.1051/matecconf/201815702053 | |
Published online | 14 March 2018 |
- EAA - European Aluminium Association. The Aluminium Automobile Manual: Applications - Power train - Cylinder heads (2011) [Google Scholar]
- ASM Handbook, vol. 15 - Casting. (ASM International, Materials Park, Ohio, USA, 2002) [Google Scholar]
- W. S. Miller, L. Zhuang, J. Bottema, A. J. Wittebrood, P. de Smet, A. Haszler, A. Vieregge, Recent development in aluminium alloys for the automotive industry. Materials Science and Engineering A 280, 37-49 (2000) [Google Scholar]
- R. Molina, P. Amalberto, M. Rosso, Mechanical characterization of aluminium alloys for high temperature applications. Part1: Al-Si-Cu alloys. Metallurgical Science and Technology 29, 1, 5-15 (2011) [Google Scholar]
- L. Heusler, F.J. Feikus, M.O. Otte, Alloy and Casting Process Optimization for Engine Block Application. AFS Transactions 01-050, 1-9 (2001) [Google Scholar]
- E. Tillová, M. Chalupová, Structural analysis (Štruktúrna analýza), (EDIS ZU, 2009) [Google Scholar]
- COMALCO: Modification of foundry Al-Si alloys. Technical report, No4, (Comalco Aluminum Limited. Brisbane, Australia, 1997) [Google Scholar]
- J. Cais, J. Svobodová, V. Weiss, Influence of modification and heat treatment on the mechanical properties of the AlSi7Mg0.3 alloy. Cluster - Casting - Future: international scientific conference. Rzeszów, 67-70, (2014) [Google Scholar]
- N. Náprstková, S. Kusmierczak, J. Cais, Modification of AlSi7Mg0.3 alloy by strontium. Manufacturing Technology 13 (3), 373-380 (2013) [Google Scholar]
- B. Zhang, M. Garro, C. Tagliano, Dendrite arm spacing in aluminium alloy cylinder heads produced by gravity semi-permanent mold. Metallurgical Science and Technology 21 (1), 1-9 (2003) [Google Scholar]
- E. Tillová, M. Chalupová, L. Hurtalová, Evolution of Phases in a Recycled Al-Si Cast Alloy During Solution Treatment. Scanning Electron Microscopy, Dr. Viacheslav Kazmiruk (Ed.), InTech, (2012) [Google Scholar]
- L. Hurtalová, J. Belan, E. Tillová, M. Chalupová, Changes in structural characteristics of hypoeutectic Al-Si cast alloy after age hardening. Journal Materials Science / Medžiagotyra 18 (3), 228-233 (2012) [Google Scholar]
- J. A. Taylor, Iron-containing intermetallic phases in Al-Si based casting alloys. Procedia Materials Science 1, 19-33 (2012) [Google Scholar]
- K. L. Fan, G. Q. He, X. S. Liu, B. Liu, M. She, Y. L. Yuan, Y. Yang, Q. Lu, Tensile and fatigue properties of gravity casting aluminum alloys for engine cylinder heads. Materials Science and Engineering A 586, 78-85 (2013) [CrossRef] [Google Scholar]
- M. A. Moustafa, F. H. Samuel, H. W. Doty, Effect of solution heat treatment and additives on the microstructure of Al-Si (A413.1) automotive alloys. Journal of Materials Science 38, 4507-4522 (2003) [CrossRef] [Google Scholar]
- F. Paray, J. E. Gruzlesky, Microstructure - mechanical property relationships in 356 alloy. Cast Metals 7 (1), 29- 40 (1994) [CrossRef] [Google Scholar]
- E. Sjölander, S. Seifeddine, The heat treatment of Al-Si-Cu-Mg casting alloys. Journal of Materials Processing Technology 210, 1249-1259 (2010) [CrossRef] [Google Scholar]
- E. Tillová, M. Chalupová, L. Hurtalová L., E. Ďuriniková, Quality control of microstructure in recycled Al-Si cast alloys. Manufacturing Technology 11, 70-76 (2011) [Google Scholar]
- ASM Metals Handbook. Vol.4 - Heat treating, (ASM International, Materials Park, OH, USA, 1991) [Google Scholar]
- A. Manente, G. Timelli, Optimizing the heat treatment process of cast aluminium alloys. Recent Trends in Processing and Degradation of Aluminium Alloys, (InTech, 2011) [Google Scholar]
- S. Shivkumar, S. Ricci, C. Keller, D. Apelian, Effect of solution treatment parameters on tensile properties of cast aluminum alloys. Journal of Heat Treating 8 (1), 63-70 (1990) [CrossRef] [Google Scholar]
- M. Tash, F. H. Samuel, F. Mucciardi, H. W. Doty, Effect of metallurgical parameters on the hardness and microstructural characterization of as-cast and heat-treated 356 and 319 aluminum alloys. Materials Science and Engineering A 443, 185-201 (2007) [CrossRef] [Google Scholar]
- L. Hurtalová, E. Tillová, M. Chalupová, The changes of fatigue properties in aluminium cast alloy during solution treatment. Key Engineering Materials 592-593, 433-436 (2014) [CrossRef] [Google Scholar]
- S. Capuzzi, Development of heat treatments for automotive components die cast with secondary aluminium alloy at semi-solid state. Metallurgia Italiana 106 (3), 3-11 (2014) [Google Scholar]
- M. Javidani, D. Larouche, X. Grant Chen, Dissolution of Cu/Mg bearing intermetallics in Al-Si foundry alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (10), 4818-4830 (2016) [CrossRef] [Google Scholar]
- H. C. Long, J. H. Chen, C. H. Liu, D. Z. Li, Y. Y. Li, The negative effect of solution treatment on the age hardening of A356 alloy. Materials Science and Engineering A 566, 112-118 (2013) [CrossRef] [Google Scholar]
- D. L. Zhang, L. H. Zheng, D. H. StJohn, Effect of a short solution treatment time on microstructure and mechanical properties of modified Al-7wt.%Si-0.3wt.%Mg alloy. Journal of Light Metals 2, 27-36 (2002) [CrossRef] [Google Scholar]
- D. Lados, D. Apelian, L. Wang, Solution Treatment Effects on Microstructure and Mechanical Properties of Al-(1 to 13 pct)Si-Mg Cast Alloys. Metallurgical and Materials Transactions B 42B, 171-180 (2011) [CrossRef] [Google Scholar]
- L. Richtárech, D. Bolibruchová, E. Kucharčíková, Appliciation of heat treatment for elimination of iron in secondary Al-Si alloy. Manufacturing Technology 16 (2), 431-436 (2016) [Google Scholar]
- D. Lados, D. Apelian, L. Wang, Aging Effects on Heat Treatment Response and Mechanical Properties of Al-(1 to 13 pct)Si-Mg Cast Alloys. Metallurgical and Materials Transactions B 42B, 181-188 (2011) [CrossRef] [Google Scholar]
- M. Sága, P. Kopas, M. Uhríčik, Modeling and Experimental Analysis of the Aluminium Alloy Fatigue Damage in the case of Bending - Torsion Loading. Procedia Engineering 48, 599-606 (2012) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.