MATEC Web of Conferences

Open Access

Researches on mechanical vibrations used in assistive devices manufacturing 01001

Răzvan Bogățeanu, Claudiu Bîșu, Constantin Dogariu, Sorin Mihai Croitoru and Dana Tilină

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001001

• Abstract
• PDF (1.839 MB)
• References

Open Access

Development of Augmented Reality Application for Interactive Smart Materials 01002

Stefan Djurdjevic, Dragoljub Novakovic, Sandra Dedijer, Nemanja Kasikovic and Zeljko Zeljkovic

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001002

• Abstract
• PDF (1.438 MB)
• References

Open Access

The optimization of welding regimes for obtaining corrosion resistant welded constructions 01003

Dan Dobrotă and Valentin Petrescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001003

• Abstract
• PDF (3.727 MB)
• References

Open Access

Alternative method for minimally invasive determination of the wood fragility from cultural heritage assets 01004

Constantin Ștefan Ionescu, Aurel Lunguleasa, Cosmin Spîrchez and Anamaria Avram

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001004

• Abstract
• PDF (2.041 MB)
• References

Open Access

Analysis the amount of lubrication and roughness of raceways on dynamic behavior on the ball bearing 01005

Ivan Knežević, Aleksandar Živković, Mirjana Bojanić Šejat, Milan Rackov, Milan Zeljković and Nicolae Florin Cofaru

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001005

• Abstract
• PDF (1.582 MB)
• References

Open Access

Use of sound spectral signals analysis to assess the technical condition of mechanical devices 01006

Paweł Maciąg and Leszek Chałko

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001006

• Abstract
• PDF (2.633 MB)
• References

Open Access

Mechanical properties of Methacrylic Plexus MA300 adhesive material determined in tensile test and butt joints of aluminum thick plates 01007

Paweł Maćkowiak, Dominika Płaczek and Agnieszka Sołtysiak

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001007

• Abstract
• PDF (1.549 MB)
• References

Open Access

Determining efficiency of cycloid reducers using different calculation methods 01008

Milos Matejic, Mirko Blagojevic, Ileana Ioana Cofaru, Nenad Kostic, Nenad Petrovic and Nenad Marjanovic

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001008

• Abstract
• PDF (1.459 MB)
• References

Open Access

A study of thermo-elastic characteristics of the machine tool spindle 01009

Aleksandar Zivkovic, Milos Knezev, Milan Zeljkovic, Slobodan Navalusic and Livia Dana Beju

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001009

• Abstract
• PDF (2.344 MB)
• References

Open Access

Interfaces Used for Smartglass Devices into the Augmented Reality Projects 01010

Marius Leonard Olar, Marius-Nicolae Risteiu and Monica Leba

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001010

• Abstract
• PDF (1.697 MB)
• References

Open Access

Reimagining vision with infinity mirrors 01011

Arun Fabian Panaite and Lorand Bogdanffy

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001011

• Abstract
• PDF (1.734 MB)
• References

Open Access

Adhesion between the bed and component manufactured in FDM technology using selected types of intermediary materials 01012

Dominika Płaczek

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001012

• Abstract
• PDF (1.776 MB)
• References

Open Access

Optimizing the magnetic circuit of an actuator 01013

Lizeta Popescu and Lucian Diodiu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001013

• Abstract
• PDF (2.344 MB)
• References

Open Access

Thermal simulation of an actuator 01014

Lizeta Popescu and Lucian Diodiu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001014

• Abstract
• PDF (2.063 MB)
• References

Open Access

Some aspects regarding the thermic behaviour of a basalt parts in machine building industry 01015

Ilie Octavian Popp

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001015

• Abstract
• PDF (1.435 MB)
• References

Open Access

Studies on wheel mounting options on shafts 01016

Carmen Purcar, Mircea Bădescu and Marinela Inţă

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001016

• Abstract
• PDF (2.024 MB)
• References

Open Access

Contactless power transfer application for devices identification 01017

Samuel Pușcașu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001017

• Abstract
• PDF (1.902 MB)
• References

Open Access

Analysis of Possible Concept Solutions of Chain Drives 01018

Milan Rackov, Siniša Kuzmanović, Ivan Knežević, Maja Čavić, Marko Penčić, Dijana Čavić and Nicolae Florin Cofaru

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001018

• Abstract
• PDF (1.617 MB)
• References

Open Access

Design of a Brain-Controlled Video Game based on a BCI System 01019

Sebastian – Daniel Rosca and Monica Leba

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001019

• Abstract
• PDF (1.687 MB)
• References

Open Access

Aspects relating to the reliability calculation of the cutting-teeth mounted on the bucket wheel excavators used in lignite mining 01020

Ovidiu-Bogdan Tomuş, Andrei Andraş, Dumitru Jula and Stela Dinescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001020

• Abstract
• PDF (1.731 MB)
• References

Open Access

Prosumer’s impact on low voltage distribution networks 01021

Sorin Dan Volosciuc and Monica Elena Dragosin

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001021

• Abstract
• PDF (1.652 MB)
• References

Open Access

Development of Distance Learning Concept with Graphic Machines Working Process Visualization 01022

Zeljko Zeljkovic, Dragoljub Novakovic, Sandra Dedijer, Nemanja Kasikovic and Stefan Djurdjevic

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001022

• Abstract
• PDF (1.763 MB)
• References

Open Access

From part to point cloud, the modelling of a 3D part 01023

Diana Muntean and Octavian Bologa

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929001023

• Abstract
• PDF (1.590 MB)
• References

Open Access

Efficiency analysis of implementing hybrid printing technologies 02001

Liviu Berculescu, Emilia Bălan, Cristina Mohora and Mariana Tudor

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929002001

• Abstract
• PDF (1.789 MB)
• References

Open Access

Methods to identify time series abnormalities and predicting issues caused by component failures 02002

Crina Narcisa Deac, Gicu Calin Deac, Florina Chiscop and Cicerone Laurentiu Popa

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929002002

• Abstract
• PDF (1.999 MB)
• References

Open Access

Industry 4.0: Key Questions in Manufacturing 02003

Camelia Gabriela Arsene and George Constantin

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929002003

• Abstract
• PDF (1.536 MB)
• References

Open Access

Improvement of the technological process of carbonated spring water by implementing the quality and food safety management standards 02004

Maria Popa, Ioana Glevitzky and Adina Sârb

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929002004

• Abstract
• PDF (1.588 MB)
• References

Open Access

Creative synthesis of the technical solutions in the field of industrial processes 02005

Laurențiu Slătineanu, Adelina Hrițuc, Gheorghe Nagîț, Oana Dodun, Irina Beșliu-Băncescu, Bogdan Oroian, Ionuț Condrea, Carmen Botezatu and Mihaela Ețcu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929002005

• Abstract
• PDF (1.799 MB)
• References

Open Access

Automation possibilities in a low rotation warehouse of a Belgian manufacturing plant. A case study 02006

Anca Mocan and Anca Draghici

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929002006

• Abstract
• PDF (1.942 MB)
• References

Open Access

Monitoring the technological processes in the wood industry in order to make them more efficient through technical overhauling 02007

Radu Dan Paltan, Cristina Biriş and Loredana Anne-Marie Rădulescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929002007

• Abstract
• PDF (1.715 MB)
• References

Open Access

The possibility of cutting shapes on CNC machine tools 02008

Piotr Paszta

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929002008

• Abstract
• PDF (2.351 MB)
• References

Open Access

Remanent battery capacity estimation for autonomous ground industrial vehicles 02009

Tom Savu and Bogdan Alexandru Jugravu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929002009

• Abstract
• PDF (2.443 MB)
• References

Open Access

Study of the cutting process parameters that influence the surface quality machined by end milling of the aluminum alloy 02010

Alina Bianca Pop and Aurel Mihail Țîțu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929002010

• Abstract
• PDF (2.030 MB)
• References

Open Access

Study of Forces Influencing the Shaking Parameters in Mechanized / Robot-assisted Harvesting of Olives 03001

Theoharis Babanatsas, Dan Ovidiu Glavan, Roxana Mihaela Babanatis Merce and Andreea Ioana Glavan

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003001

• Abstract
• PDF (1.916 MB)
• References

Open Access

Metallographical Aspects of the Application of Special Paint Layers for the Protection of Machine Part Sections against the Effect of lonitriding 03002

Marius Bibu and Florin Ciofu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003002

• Abstract
• PDF (1.749 MB)
• References

Open Access

A Study of Milk Particles Size Variation with pH Change using Dynamic Light Scattering 03003

Dan Chicea and Liana Maria Chicea

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003003

• Abstract
• PDF (1.745 MB)
• References

Open Access

Increasing the Wear Resistance of Metallic Materials by applying Thermochemical Treatments 03004

Florin Ciofu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003004

• Abstract
• PDF (2.006 MB)
• References

Open Access

Optimal Selection of Equipment for Injection Molding Process using the AHP Method 03005

Adelina Hrițuc, Margareta Coteață, Oana Dodun, Gheorghe Nagîț and Laurențiu Slătineanu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003005

• Abstract
• PDF (1.591 MB)
• References

Open Access

Current Experience with Application of Metal-based Nanofertilizers 03006

Martin Heinisch, José Jácome and Dan Miricescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003006

• Abstract
• PDF (1.444 MB)
• References

Open Access

Comparison of Quantitative Changes after passing the Laser Beam through Polymeric Material 03007

Libuše Sýkorová, Jana Knedlová, Dagmar Měřínská and Vladimír Pata

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003007

• Abstract
• PDF (2.026 MB)
• References

Open Access

Experimental Assessment of the Depth of the Deformed Layer in the Roller Burnishing Process 03008

Marek Kowalik and Tomasz Trzepiecinski

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003008

• Abstract
• PDF (1.915 MB)
• References

Open Access

Effect of Pressing Parameters on the Quality of Joint Formation of Heat Exchanger Fins with the Base Plate 03009

Marek Kowalik, Tomasz Trzepiecinski and Hirpa G. Lemu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003009

• Abstract
• PDF (1.773 MB)
• References

Open Access

Electromagnetic Forming Analysis of the Al 99.0 Sheet with Tools of Different Configurations 03010

Dorin Luca, Cristina Biriş and Dorian Luca

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003010

• Abstract
• PDF (1.492 MB)
• References

Open Access

Experimental Researches Regarding Mechanical Behaviour of Dental Prototypes realized by Additive Technologies 03011

Edgar Moraru, Octavian Dontu, Daniel Besnea, Ciprian Rizescu, Dana Rizescu and Alina Popescu-Cuta

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003011

• Abstract
• PDF (2.429 MB)
• References

Open Access

Advanced Techniques used in Numerical Simulation for Deep-drawing Process 03012

Valentin Oleksik, Radu Breaz, Gabriel Racz, Paul Dan Brindasu and Octavian Bologa

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003012

• Abstract
• PDF (2.013 MB)
• References

Open Access

The Usage of the Johnson-Cook Constitutive Model in the Finite Element Analysis of the Caulking Process 03013

Claudiu Rodean, Livia-Dana Beju, Gabriela Rusu and Mihai Popp

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003013

• Abstract
• PDF (2.066 MB)
• References

Open Access

Simulation of the Single Point Incremental Forming of Polyamide and Polyethylene Sheets 03014

Nicolae Alexandru Roşca and Mihaela Oleksik

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003014

• Abstract
• PDF (2.514 MB)
• References

Open Access

Complex Micro Machining of an Injection Mold Surface for a Conductive Polymeric Composite Product 03015

Daniiel Serban and Constantin Gheorghe Opran

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003015

• Abstract
• PDF (1.986 MB)
• References

Open Access

The Analysis of Fiber and CO₂ Laser Cutting Accuracy 03016

Robert Sołtysiak, Piotr Wasilewski, Agnieszka Sołtysiak, Adam Troszyński and Paweł Maćkowiak

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003016

• Abstract
• PDF (237.7 KB)
• References

Open Access

On the Feasibility of Printing 3D Composite Objects Based on Polypropylene/Multi-walled Carbon Nanotubes 03017

Nicoleta-Violeta Stanciu, Felicia Stan, Catalin Fetecau and Florin Susac

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929003017

• Abstract
• PDF (2.449 MB)
• References

Open Access

3D-Printed shoe last for bespoke shoe manufacturing 04001

Cătălin Amza, Aurelian Zapciu and Diana Popescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004001

• Abstract
• PDF (1.691 MB)
• References

Open Access

Mechanical properties of 3D printed composites with ABS/ASA substrate and glass fiber inserts 04002

Cătălin G. Amza, Aurelian Zapciu, Arnheiður Eyþórsdóttir, Auðbjörg Björnsdóttir and Jonathan Borg

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004002

• Abstract
• PDF (1.804 MB)
• References

Open Access

Experimental study on the automatic selection of olives 04003

Roxana Mihaela Babanatis Merce, Theoharis Babanatsas and Dan Ovidiu Glãvan

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004003

• Abstract
• PDF (1.845 MB)
• References

Open Access

Study of aortic dissections treatment. Segmentation, simulation and valiadation of surgical results 04004

Cristian Bucurenciu, Victor S Costache and Gabriela S Cândea

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004004

• Abstract
• PDF (1.851 MB)
• References

Open Access

Personalised Formwork – scientific approach for new solution variants 04005

Raluca Diaconu and Paul Dan Brindasu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004005

• Abstract
• PDF (2.506 MB)
• References

Open Access

Haptics democratization: challenges and opportunities 04006

Robert Iacob and Diana Popescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004006

• Abstract
• PDF (1.846 MB)
• References

Open Access

A grafo-numeric method of determination of the operation power of the rotor of EsRc-1400 bucket wheel excavator using computer simulation in SolidWorks 04007

Florin Dumitru Popescu, Sorin Mihai Radu, Andrei Andraş and Ildiko Kertész Brînaş

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004007

• Abstract
• PDF (2.037 MB)
• References

Open Access

Force and thickness prediction with FEA of the cranial implants manufactured through SPIF 04008

Mihai Popp, Gabriela Rusu, Sever-Gabriel Racz and Ilie Octavian Popp

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004008

• Abstract
• PDF (1021 KB)
• References

Open Access

Considerations and simulations about Pulse Detonation Engine 04009

Vasile Prisacariu, Constantin Rotaru and Mihai Leonida Niculescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004009

• Abstract
• PDF (1.876 MB)
• References

Open Access

Improvements on Grasping the Object with Irregular Shapes 04010

Alina Rodica Spanu, George Dragoi and Iolanda Panait

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004010

• Abstract
• PDF (2.664 MB)
• References

Open Access

Researches regarding scale reduced models for the optimisation of the aerodynamic coefficient 04011

Alexandru Lucian Stanciu, Nicoleta Pascu, Constantin Dogariu and Cristina Mohora

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929004011

• Abstract
• PDF (2.271 MB)
• References

Open Access

Process improvement cost management in the quality management system of an industrial enterprise 05001

Alexander Aleksakhin, Evgeniya Eliseeva, Ivan Zaytsev, Yuliya Aleksakhina and Luydmila Kostygova

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929005001

• Abstract
• PDF (1.430 MB)
• References

Open Access

An Efficient Procedure for Materials’ Marking in Metallic Constructions Industry Based on QR Codes 05002

Simona Riurean

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929005002

• Abstract
• PDF (2.061 MB)
• References

Open Access

The improvement of quality management system in a porcelain factory 05003

Adina Sârb, Ioana Glevitzky, Liliana Itul and Maria Popa

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929005003

• Abstract
• PDF (1.659 MB)
• References

Open Access

Measurement system analysis by attribute, an effective tool to ensure the quality of the visual inspection process within an organization 05004

Carmen Simion

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929005004

• Abstract
• PDF (1.816 MB)
• References

Open Access

Research on the quality assurance of fermented dairy products with addition of bioactive compounds from medicinal plants 05005

Ovidiu Tiţa, Adelina Maria Constantinescu and Mihaela Adriana Tiţa

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929005005

• Abstract
• PDF (1.762 MB)
• References

Open Access

A review of the Europe indicators on climate change - industry, innovation and infrastructure 06001

Iudit Bere‒Semeredi and Anca Mocan

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929006001

• Abstract
• PDF (1.956 MB)
• References

Open Access

Analytical model for assessing the investments in connectivity for small airports 06002

Cătălin Cioacă, Mircea Boșcoianu, Dănuț Bălos and Doru Luculescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929006002

• Abstract
• PDF (1.680 MB)
• References

Open Access

Theoretical and practical aspects of the Coandă effect applied in aeronautics 06003

Ionică Cîrciu and Constantin Rotaru

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929006003

• Abstract
• PDF (1.781 MB)
• References

Open Access

Considerations on the role of modernizing the road infrastructure in the prevention of road accidents 06004

Cristian Deac and Lucian Tarnu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929006004

• Abstract
• PDF (1.923 MB)
• References

Open Access

Analysis of the Road Risk on the National Road 7 Sector of the Olt River Gorge, between Talmaciu and Calimanesti, for the Years 2011-2018 06005

Lucian Tarnu and Cristian Deac

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929006005

• Abstract
• PDF (2.162 MB)
• References

Open Access

Effects of reversible lane implementation, a case study simulation 06006

Lucian Lobonț and Andrei Marius Pînzariu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929006006

• Abstract
• PDF (2.149 MB)
• References

Open Access

Study on the opening of a new working place in Romania of an European expedition house 06007

Liliana Georgeta Popescu and Mihaela Elena Frãþilã

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929006007

• Abstract
• PDF (1.932 MB)
• References

Open Access

On the possibility to decrease the fuel consumption for a heavy-duty truck Diesel engine using the Turbo-compound method: a case study 06008

Bogdan Radu and Alexandru Racovitza

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929006008

• Abstract
• PDF (2.188 MB)
• References

Open Access

Retracted Article: Road Traffic Monitoring System with Self-Learning Function using the Raspberry Pi Platform 06009

Cosmin Rus, Răzvan Marcuş and Olimpiu Stoicuța

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929006009

• Abstract
• PDF (1.792 MB)

Open Access

The Origin–Destination Matrix Development 06010

Vasile Dragu and Eugenia Alina Roman

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929006010

• Abstract
• PDF (1.690 MB)
• References

Open Access

Erratum

Retractation note: Road Traffic Monitoring System with Self-Learning Function using the Raspberry Pi Platform 06011

Jacek Zaucha, Maciej Matczak, Cosmin Rus, Răzvan Marcuș and Olimpiu Stoicuța

Published online: 16 October 2019

DOI: https://doi.org/10.1051/matecconf/201929006011

• Abstract
• PDF (44.49 KB)

Open Access

The planning of business processes in an uncertain environment on oligopolistic markets 07001

Alexander Aleksakhin, Ivan Zaytsev, Evgeniya Eliseeva, Angelina Petergova and Luydmila Kostygova

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007001

• Abstract
• PDF (1.381 MB)
• References

Open Access

Changes Required in Organizing the Creativity Management in Romanian Firms 07002

Gina-Maria Moraru and Daniela Popa

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007002

• Abstract
• PDF (1.743 MB)
• References

Open Access

Lean university: applying the ECRS method to improve an administrative process 07003

Raluca Mihaela Bârsan and Felicia-Mihaela Codrea

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007003

• Abstract
• PDF (1.544 MB)
• References

Open Access

Managerial strategies of the personal values, used to improve engineers communication 07004

Mihaela Laura Bratu and Lucian-Ionel Cioca

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007004

• Abstract
• PDF (1.541 MB)
• References

Open Access

Intercultural Communication and its Challenges Within the International Virtual Project Team 07005

Iulia Dumitraşcu-Băldău and Dănuţ Dumitru Dumitraşcu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007005

• Abstract
• PDF (1.866 MB)
• References

Open Access

Outsourcing Towards Greater Agility Through Investigating Decoupling Points in Leagile Supply Chains 07006

Monica Faur and Constantin Bungau

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007006

• Abstract
• PDF (2.019 MB)
• References

Open Access

Best Practices to Increase Manufacturing Productivity - Comparative study 07007

Ion Cosmin Gherghea, Constantin Bungau and Dan Claudiu Negrau

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007007

• Abstract
• PDF (1.813 MB)
• References

Open Access

Analysis of factors from the external environment in changing business processes 07008

Mihaela Ghicajanu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007008

• Abstract
• PDF (1.789 MB)
• References

Open Access

Organizational climate aspects and principal’s burnout in Southern Israel schools 07009

Andreea Ionică, Yunnis Nassar and Sorin Mangu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007009

• Abstract
• PDF (1.723 MB)
• References

Open Access

Organizational Culture Vector Important for the Performance of a Company 07010

Elena-Izabela Popa, Amalia Furdui and Eduard-Victor Edelhauser

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007010

• Abstract
• PDF (1.562 MB)
• References

Open Access

Considerations on Management for Technological Entrepreneurship 07011

Elena-Izabela Popa, Amalia Furdui and Eduard-Victor Edelhauser

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007011

• Abstract
• PDF (1.644 MB)
• References

Open Access

Governmental interventionism degree in economy - a case study in OECD countries 07012

Arik Sadeh, Claudia Florina Radu, Cristina Feniser and Ken Brown

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007012

• Abstract
• PDF (1.596 MB)
• References

Open Access

Technical and commercial communication methods used in semi-finished industrial goods market in South East European markets 07013

Szilárd Székely, Lucian-Ionel Cioca and Adriana Benedek

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929007013

• Abstract
• PDF (1.931 MB)
• References

Open Access

Comparative study regarding the wear of gearwheels manufactured through additive technologies 08001

Daniel Besnea, Ciprian Rizescu, Edgar Moraru, Elena Dinu and Iolanda Panait

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008001

• Abstract
• PDF (1.994 MB)
• References

Open Access

Modeling, simulation and experimental research for MEMS cantilevers of complex geometry 08002

Adriana Sandu, Lucian Bogatu, Georgeta Ionascu, Elena Manea and Viorel Gheorghe

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008002

• Abstract
• PDF (1.870 MB)
• References

Open Access

Research on the designing of pneumatic positioning units controlled with valves commanded in modulated pulses 08003

Mihai Avram, Victor Constantin and Emil-Ionuț Niță

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008003

• Abstract
• PDF (1.738 MB)
• References

Open Access

Hardware structure of a surveillance system for strategic objectives 08004

Victor Constantin, Mihai Avram, Constantin Bucsan and Alexandru Vlasceanu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008004

• Abstract
• PDF (2.045 MB)
• References

Open Access

The effects of filling characteristics on the longitudinal forces developed in the braking train 08005

Camil Ion Crăciun and Cătălin Cruceanu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008005

• Abstract
• PDF (1.890 MB)
• References

Open Access

The analysis of the robotized handling of oxygen gas bottles with the help of the Petri networks 08006

Lavinia Culda, Elena Stela Muncuț and Geza Mihai Erdodi

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008006

• Abstract
• PDF (1.901 MB)
• References

Open Access

Fin-Ray effect® based structure for the passive mobilization of the hand joints 08007

Andrea Deaconescu and Tudor Deaconescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008007

• Abstract
• PDF (1.699 MB)
• References

Open Access

On the longitudinal vibration of the railway bogie 08008

Mădălina Dumitriu and Marius Alin Gheţi

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008008

• Abstract
• PDF (1.756 MB)
• References

Open Access

Evaluations of the voice to text transfer in different conditions 08009

Matej Janíček, Karol Velíšek, Radovan Holubek and Roman Ružarovský

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008009

• Abstract
• PDF (1.710 MB)
• References

Open Access

Mechanical properties comparison of Ti6Al4V produced by different technologies under static load conditions 08010

Karolina Karolewska and Bogdan Ligaj

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008010

• Abstract
• PDF (1.771 MB)
• References

Open Access

Influence of the theoretical load point on the value of the J - JQ integral during determination of fracture toughness of 2519 aluminium alloy 08011

Maciej Kotyk and Dariusz Boroñski

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008011

• Abstract
• PDF (1.695 MB)
• References

Open Access

Review and synthesis of a walking machine (Robot) leg mechanism 08012

Tesfaye Olana Terefe, Hirpa G. Lemu and Addisu K/Mariam

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008012

• Abstract
• PDF (1.733 MB)
• References

Open Access

Technical Solution of the Drive System for Mixing Dough Machine 08013

Aleksandar Miltenović, Milan Banić and Nikola Velimirović

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008013

• Abstract
• PDF (2.450 MB)
• References

Open Access

The welding program optimization of a S355 steel assembly used in agricultural machinery 08014

Elena-Stela Muncut, Lavinia-Ioana Culda, Geza-Mihai Erdodi and Gheorghe Sima

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008014

• Abstract
• PDF (2.588 MB)
• References

Open Access

Manipulator for scanning of the pipes external surface 08015

Constantin Niţu, Bogdan Grămescu, Adrian Cartal and Ahmed Sachit Hashim

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008015

• Abstract
• PDF (1.883 MB)
• References

Open Access

Research regarding the upgrading of the attachments for balance ropes of mine hoists 08016

Iosif Dumitrescu, Danut Grecea, Cosmin Vitan and Dorel Vitan

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008016

• Abstract
• PDF (1.863 MB)
• References

Open Access

Effect of the aging process at a temperature of 300 degrees Celsius of Ti6Al4V alloy on mechanical strength under static loading conditions 08017

Mateusz Wirwicki

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929008017

• Abstract
• PDF (1.769 MB)
• References

Open Access

An experimental study on the improvement of functionality of knitted composite for mattress 09001

Milena Dinu and Diana Coman

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929009001

• Abstract
• PDF (1.750 MB)
• References

Open Access

The Internet – A Successful Technology for the Footwear Factories from the Republic of Moldova 09002

Elena Spînachii, Cristian Matran, Marina Malcoci and Evgheni Pîrvan

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929009002

• Abstract
• PDF (1.528 MB)
• References

Open Access

Research Regarding Uniaxial Tensile Strength of Nylon Woven Fabrics, Coated and Uncoated with Silicone 09003

Dorin Vlad and Mihaela Oleksik

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929009003

• Abstract
• PDF (2.310 MB)
• References

Open Access

Correlation of Gas Quality with Hydrodynamic Parameters in Transmission Networks 10001

Cristian Nicolae Eparu, Sorin Neacsu and Adrian Neacsa

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929010001

• Abstract
• PDF (1.902 MB)
• References

Open Access

The Balance of Multi-phase Gathering and Transport Systems 10002

Cristian Nicolae Eparu, Sorin Neacsu, Renata Radulescu and Alina Petronela Prundurel

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929010002

• Abstract
• PDF (2.217 MB)
• References

Open Access

Casing while Drilling – a Viable Alternative to Conventional Drilling 10003

Ion Foidaş, Dan-Paul Ștefănescu and Mihai Serbancea

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929010003

• Abstract
• PDF (1.812 MB)
• References

Open Access

Considerations on the optimization of natural gas deliveries by using automated control systems 10004

Alina Gligor and Sorin-Alecu Huidan

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929010004

• Abstract
• PDF (1.691 MB)
• References

Open Access

Current trends in the exploitation of mature gas fields in the context of rehabilitation concept 10005

Diana Lupu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929010005

• Abstract
• PDF (1.926 MB)
• References

Open Access

Modelling the Atmospheric Distillation Using the Unisim Design Simulator 10006

Cristian Patrascioiu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929010006

• Abstract
• PDF (1.831 MB)
• References

Open Access

Factors Influencing the Enhancement of Energy Efficiency in the Oil and Gas Industry 10007

Silvian Suditu, Monica Emanuela Stoica and Tudora Cristescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929010007

• Abstract
• PDF (1.586 MB)
• References

Open Access

Practical realisation and experimental results of ultrasonic filters used in air filtration 11001

Dan Niţoi, Zoia Apostolescu, Gabriel Iacobescu and Corneliu Rontescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011001

• Abstract
• PDF (1.746 MB)
• References

Open Access

Identification and analysis of geotechnical risks in the conditions of flooding of the remaining gaps 11002

Izabela Maria Apostu and Florin Faur

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011002

• Abstract
• PDF (1.707 MB)
• References

Open Access

Open source solutions to improve the quality of sustainable forest management 11003

Iulian Alexandru Bratu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011003

• Abstract
• PDF (2.157 MB)
• References

Open Access

Bio-Gaseous Fuels from Agricultural Waste Pyrolysis (Part I) 11004

Gabriela Ionescu, Cora Bulmau and Cosmin Mărculescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011004

• Abstract
• PDF (1.909 MB)
• References

Open Access

Bio-Gaseous Fuels from Agricultural Waste Pyrolysis (Part II) 11005

Cora Bulmău, Gabriela Ionescu and Cosmin Mărculescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011005

• Abstract
• PDF (207.5 KB)
• References

Open Access

Rehabilitation opportunities of geomorphological modified lands in Panga Open Pit – Coal Basin Berbeşti 11006

Ramona-Victoria Chiriţă and Maria Lazăr

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011006

• Abstract
• PDF (2.334 MB)
• References

Open Access

Critical analysis of localization of micro-hydropower plant in the superior basin of Argeş river 11007

Mădălina Delayat and Maria Lazăr

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011007

• Abstract
• PDF (2.236 MB)
• References

Open Access

Research on solar radiation potential as a source of renewable energy in the Motru area 11008

Marin-Silviu Nan, Alin Sultan, Danut Grecea and Cosmin Vitan

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011008

• Abstract
• PDF (1.842 MB)
• References

Open Access

Designing the ultrasonic system used in industrial air filtration based on the ultrasonic cavitation phenomenon 11009

Dan Niţoi, Zoia Apostolescu, Constantin Petriceanu and Corneliu Rontescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011009

• Abstract
• PDF (576.2 KB)
• References

Open Access

The risk of landslide occurrence in the waste dump belonging to the Ruget quarry and measures to combat it 11010

Constantin Rada and Florin Faur

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011010

• Abstract
• PDF (2.431 MB)
• References

Open Access

Physical and calorific properties of wheat straw briquettes and pellets 11011

Cosmin Spirchez, Aurel Lunguleasa, Constantin Ionescu and Catalin Croitoru

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011011

• Abstract
• PDF (1.651 MB)
• References

Open Access

Aspects regarding a mining area rehabilitation for post-industrial tourism 11012

Mihaela Toderas, Ionela Samuil, Andreea Ionica, Marius Olar and Stefan Militaru

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929011012

• Abstract
• PDF (2.072 MB)
• References

Open Access

Ergonomics study on an assembly line used in the automotive industry 12001

Daniel-Constantin Anghel, Eduard-Laurențiu Niţu, Alin-Daniel Rizea, Alin Gavriluţă, Ana Gavriluţă and Nadia Belu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012001

• Abstract
• PDF (1.936 MB)
• References

Open Access

Criminal liability in case of infringement of the rules on occupational safety and health and the occurrence of accidents at work – subjects of the offenses 12002

Ioan Popescu, Nicolae Romandas, Nicoleta-Monica Lohan, Andrei George Albulescu, Elena Mihalache and Constantin Baciu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012002

• Abstract
• PDF (76.05 KB)
• References

Open Access

A comparative analysis of risk assessment techniques from the risk management perspective 12003

Crina Maria Barb and Daniel Nicolae Fita

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012003

• Abstract
• PDF (1.594 MB)
• References

Open Access

Shock Resistance Improvement of Carbon Steel Carabiners Used at PPE 12004

Diana-Petronela Burduhos-Nergis, Andrei-Victor Sandu, Dumitru-Doru Burduhos-Nergis, Doru-Costin Darabont, Radu-Ioachim Comaneci and Costica Bejinariu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012004

• Abstract
• PDF (1.879 MB)
• References

Open Access

You have many accidents, you pay little, you have no accidents, you pay the same 12005

Andrei-George Albulescu, Ioan Popescu, Anișoara Corăbieru, Alin Marian Cazac and Mihai-Adrian Bernevig-Sava

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012005

• Abstract
• PDF (1.540 MB)
• References

Open Access

Modelling of noise reduction for Datacentre buildings fire protection with inert gas systems 12006

Cristina-Maria Mihalache, Cristin Bigan, Valentin Panduru and Cristian Tsakiris

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012006

• Abstract
• PDF (2.104 MB)
• References

Open Access

Principles for the assessment of the safety requirements of work equipment for working at heights in electrical installations 12007

Georgeta Buica and Constantin Beiu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012007

• Abstract
• PDF (1.866 MB)
• References

Open Access

MEVA - a new method of occupational health and safety risk assessment 12008

Doru-Costin Darabont, Eduard Smîdu, Alina Trifu, Vicențiu Ciocîrlea, Iulian Ivan, Costică Bejinariu, Constantin Baciu and Mihai-Adrian Bernevig-Sava

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012008

• Abstract
• PDF (1.927 MB)
• References

Open Access

Implementation of an occupational stress Control Model 12009

Loredana Cristina Dascalu, Gabriel Iacobescu, Andrei Dimitrescu, Augustin Semenescu and Valentin Petrescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012009

• Abstract
• PDF (1.903 MB)
• References

Open Access

The description and evaluation of technical incident risk on the National Power Grid in the context of power safety growth 12010

Daniel N. Fîță, Crina Barb, Dragoș Păsculescu and Leon Pană

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012010

• Abstract
• PDF (2.154 MB)
• References

Open Access

Sensitivity to ignition by electrostatic discharge of explosive dust / air 12011

Dan Gabor, Emilian Ghicioi, Mihaela Părăian, Niculina Vătavu, Florin Adrian Păun and Mihai Popa

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012011

• Abstract
• PDF (2.420 MB)
• References

Open Access

The risk of liquid wood degradation under the influence of marine factors 12012

Mihaela Luminita Barhalescu, Simona Ghita and Tudor-Cristian Petrescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012012

• Abstract
• PDF (2.608 MB)
• References

Open Access

Application of the CSR guidelines to improve the working environment 12013

Adam Górny

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012013

• Abstract
• PDF (1.698 MB)
• References

Open Access

Health and Safety Management in the Aspects of Singularity and Human Factor 12014

Janusz K. Grabara

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012014

• Abstract
• PDF (1.719 MB)
• References

Open Access

The Assessment of Mental Load of Air Traffic Controllers Based on Psychophysiological Indicators 12015

Raluca Maria Iordache and Viorica Petreanu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012015

• Abstract
• PDF (1.520 MB)
• References

Open Access

Highlights of OSH training quality: continuous training of trainers 12016

Alin Găureanu, Larisa Ivascu and Corina Doufur

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012016

• Abstract
• PDF (2.247 MB)
• References

Open Access

OSH - sustainability connection: innovation, education, and benefits 12017

Larisa Ivascu, Alin Artene, Attila Turi, Monica Balan and Corina Dufour

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012017

• Abstract
• PDF (1.799 MB)
• References

Open Access

Personality and occupational stress in the field of mine rescue and intervention 12018

Izabella Kovacs, Artur George Găman, Angelica Călămar, Daniel Pupăzan and Cristian Nicolescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012018

• Abstract
• PDF (1.666 MB)
• References

Open Access

A model for integrating work safety into the design of technical equipments 12019

Roland Iosif Moraru, Gabriel Bujor Bǎbuţ, Mihai Popescu – Stelea and Marius Simion Morar

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012019

• Abstract
• PDF (2.285 MB)
• References

Open Access

Aspects about the implementation of the occupational safety and health strategy in Romania 12020

Nicoleta Paula Neag and Alin Gaureanu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012020

• Abstract
• PDF (1.867 MB)
• References

Open Access

A comparison study of the Romanian occupational safety and health strategy with other European countries’ strategy 12021

Nicoleta Paula NEAG

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012021

• Abstract
• PDF (1.706 MB)
• References

Open Access

Researches on the ergonomic design of the workplace for the car driver profesion 12022

Olivia Doina Negoita, Oana Chivu, Claudiu Babis and Alina Gligor

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012022

• Abstract
• PDF (1.969 MB)
• References

Open Access

Consequence modelling of a truck explosion 12023

Vlad Mihai Pasculescu, Emilian Ghicioi, Marius Simion Morar, Marius Cornel Suvar and Nicolae Ioan Vlasin

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012023

• Abstract
• PDF (2.753 MB)
• References

Open Access

An exporatory study on workplace accidents and illnesses cost analysis tools 12024

Mihai Popescu-Stelea, Roland Iosif Moraru, Gabriel Bujor Băbuț and Lucian Lupu-Dima

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012024

• Abstract
• PDF (1.827 MB)
• References

Open Access

Importance of Experimental Tests for the Determination of Modeling Parameters in Fire Safety Engineering 12025

Vincenzo Torretta, Marco Barozzi, Luca Talamona, Sabrina Copelli, Fabio Conti, Elena Cristina Rada, Paolo Viotti and Marco Schiavon

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012025

• Abstract
• PDF (2.704 MB)
• References

Open Access

Indoor CO₂: potential criticalities and solutions 12026

Marco Schiavon, Luca Adami, Elena Magaril and Marco Ragazzi

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012026

• Abstract
• PDF (1.863 MB)
• References

Open Access

Using the Grey-TOPSIS Method to Assess the Functioning of the Occupational Risk Management 12027

Joanna Tabor

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012027

• Abstract
• PDF (1.905 MB)
• References

Open Access

Research on the phenomenon of explosive gas occurrence in drills for an engineering building-Case study - 12028

Cristian Tomescu, Doru Cioclea, Emeric Chiuzan, Adrian Matei and Răzvan Dragoescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012028

• Abstract
• PDF (1.854 MB)
• References

Open Access

Determination of threats traceability in the use of explosive materials in different environments 12029

Gabriel Vasilescu, Robert Laszlo, Attila Kovacs, Ilie Ciprian Jitea, Daniela Rus, Cristian Radeanu and Claudia Miron

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929012029

• Abstract
• PDF (1.741 MB)
• References

Open Access

Civilian – military interferences in the management of research for the security and defense field 13001

Dorel Badea, Gabriel Mănescu, Dumitru Iancu, Olga Bucoveţchi and Anca Dinicu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013001

• Abstract
• PDF (1.872 MB)
• References

Open Access

Designing rigorous and relevant learning experiences for future teachers 13002

Daniela-Maria Creţu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013002

• Abstract
• PDF (1.467 MB)
• References

Open Access

Gaining insight into teaching profession by using film: a preservice teachers’ experience 13003

Daniela-Maria Creţu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013003

• Abstract
• PDF (1.513 MB)
• References

Open Access

Education for sustainable development 13004

Anca Draghici

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013004

• Abstract
• PDF (1.732 MB)
• References

Open Access

Legal awareness as a factor to establish entrepreneurship 13005

Jakob B. Drobnik

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013005

• Abstract
• PDF (192.7 KB)
• References

Open Access

The value of students’ feedback 13006

Alina Georgeta Mag

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013006

• Abstract
• PDF (113.8 KB)
• References

Open Access

Comparative analysis of the military pilots training programs in the Romanian Air Force and the Polish Air Force 13007

Eduard Ionut Mihai

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013007

• Abstract
• PDF (1.517 MB)
• References

Open Access

Vulnerabilities of the Romanian Air Force pilot training system manifested in the flight training process 13008

Eduard Ionut Mihai and Ioan Dănut Balos

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013008

• Abstract
• PDF (1.535 MB)
• References

Open Access

Proposals for a More Creative Education System 13009

Gina-Maria Moraru and Daniela Popa

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013009

• Abstract
• PDF (2.110 MB)
• References

Open Access

Importance of knowledge in the process of shaping the entrepreneurial attitudes of young people 13010

Paulina Siemieniak and Małgorzata Rembiasz

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013010

• Abstract
• PDF (1.445 MB)
• References

Open Access

Competencies in the education of potential entrepreneurs. Research among students of technical faculties 13011

Małgorzata Rembiasz

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013011

• Abstract
• PDF (1.495 MB)
• References

Open Access

TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development 13012

Mihaela Ulmeanu, Cristian Doicin, Liviu Roșca, Allan Rennie, Tom Abram and Paula Bajdor

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929013012

• Abstract
• PDF (1.657 MB)
• References

Open Access

MM-DSL, support for implementing modelling tools for manufacturing processes 14001

Daniel-Cristian Crăciunean and Daniel Volovici

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929014001

• Abstract
• PDF (1.635 MB)
• References

Open Access

Digital Design Skills for Factories of the Future 14002

Adrian Florea

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929014002

• Abstract
• PDF (1.090 MB)
• References

Open Access

An ADOxx Based Environment for Problem Based Learning in Manufacturing Systems Design 14003

Ion Dan Mironescu

Published online: 21 August 2019

DOI: https://doi.org/10.1051/matecconf/201929014003

• Abstract
• PDF (1.566 MB)
• References