MATEC Web Conf.
Volume 290, 20199th International Conference on Manufacturing Science and Education – MSE 2019 “Trends in New Industrial Revolution”
|Number of page(s)||10|
|Section||Management, Modelling and Monitoring of Manufacturing Processes|
|Published online||21 August 2019|
Creative synthesis of the technical solutions in the field of industrial processes
1 ”Gheorghe Asachi” Technical University of Iași, Department of Machine Manufacturing Technology, Blvd. D. Mangeron, 59 A, Iași, Romania
2 “Ștefan cel Mare” University of Suceava, Department of Mechanics and Technology, Universității Street 13, 720229 Suceava, Romania
* Corresponding author: firstname.lastname@example.org
When a technical problem is approached, as a direct consequence of analyzing certain distinct existing solutions, an improved solution of the problem could be elaborated. Over the years, some methods able to help the designers were identified and developed. The purpose of this paper was to take into consideration and to develop a succinct comparison of some creative considered methods of solving research problems in the field of industrial processes. The first group of analyzed design method was based on the initial use of the so-called ideas diagram. The results of the analysis were used to propose solutions concerning a device for investigation of the effects developed on sharp peaks by the electrical discharges. The axiomatic design was applied as a creative design method in the case of equipment for the investigation of degradation in time of the subsystems of the computers. The reverse engineering method was considered in the case of a device for supporting the tablet in a convenient position for the user. A final succinct comparison of the three ways of synthesizing an improved solution of a technical problem from the field of industrial processes highlights the essential characteristics of the approached methods.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.