| Issue |
MATEC Web Conf.
Volume 290, 2019
9th International Conference on Manufacturing Science and Education – MSE 2019 “Trends in New Industrial Revolution”
|
|
|---|---|---|
| Article Number | 08001 | |
| Number of page(s) | 7 | |
| Section | Mechanical Engineering, Mechatronics and Robotics | |
| DOI | https://doi.org/10.1051/matecconf/201929008001 | |
| Published online | 21 August 2019 | |
Comparative study regarding the wear of gearwheels manufactured through additive technologies
University Politehnica of Bucharest, Department of Mechatronics and Precision Mechanics, Splaiul Independentei Street No. 313, Romania
* Corresponding author: d_bes@yahoo.com
The article presents the results of the experimental research on the wear of gearwheels manufactured by an additive technology. It was realized eight gearwheels with the same module and number of teeth by means fused deposition modelling technology from different materials, including PLA, ABS, CarbonFil, nylon. In order to determine the teeth wear, pitting, thinning of teeth at the base in a gear that requires a continuous and constant operation, a demonstration set-up was designed and realized to highlight the mechanical loads of the eight gearwheels made by additive technologies.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.