Open Access
Issue
MATEC Web Conf.
Volume 290, 2019
9th International Conference on Manufacturing Science and Education – MSE 2019 “Trends in New Industrial Revolution”
Article Number 12025
Number of page(s) 15
Section Safety and Health at Work
DOI https://doi.org/10.1051/matecconf/201929012025
Published online 21 August 2019
  1. E.C. Rada, G. Passamani, M. Ragazzi, V. Torretta, I.A. Istrate, I.A., G. Cioca, Dioxin contamination after a hypothetical accidental fire in baled municipal solid waste storage, Rev. Chimie 69, 997 (2018) [Google Scholar]
  2. E. Trulli, E.C. Rada, F. Conti, N. Ferronato, M. Raboni, L. Talamona, V. Torretta, Fire simulation in a full-scale bilevel rail car: Experimental analysis to assess passenger safety, Int. J. Saf. Sec. Engineer. 8, 110 (2018). [CrossRef] [Google Scholar]
  3. C.S. Cattaneo, S. Tavelli, M. Derudi, R. Rora, M. Raboni, V. Torretta, S. Copelli, Study of a nimble model to evaluate the effects of a gasoline fire in a road tunnel, Chem. Engineer. Trans. 36, 337 (2014) [Google Scholar]
  4. L.I. Cioca, R.I Moraru, R.I., Explosion and/or fire risk assessment methodology: A common approach, structured for underground coalmine environments, Arch. Min. Sci. 57, 53 (2012) [Google Scholar]
  5. S. Scotland, Practical Fire Safety Guidance for Factories And Storage Premise, Scottish Government (2008) [Google Scholar]
  6. International Fire Engineering Guidelines. Australian Building Codes Board, Canberra, Australia (2005) [Google Scholar]
  7. K. Hon-leung Wong, D. Xie, Fire Safety Management Strategy of Complex Developments, Procedia Engineer. 71, 410 (2014) [Google Scholar]
  8. I.L. Balan, L. Cioca, V. Torretta, L. Talamona, Warehouse Threats and Loss Prevention Management in Case of Fire, Procedia Technol. 22, 1028 (2016) [Google Scholar]
  9. P. Dinenno, D. Drysdale, C. L. Bayler, W. D Walton, R. L. P. Custer, J. R. Hall Jr., J. M. Watts Jr., SFPE Handbook of Fire Protection Engineering (National Fire Protection Association, Quincy, 2008) [Google Scholar]
  10. SFPE Engineering Guide to Performance-Based Fire Protection, 2nd Edition, National Fire Protection Association, Quincy, MA (2007) [Google Scholar]
  11. BS 7974, Application of Fire Safety Engineering Principles to the Design of Buildings, Code of Practice. British Standards Institute, London (2001) [Google Scholar]
  12. Recommendations for a Model Curriculum for a BS Degree in Fire Protection Engineering, Society of Fire Protection Engineers, Bethesda, MD (2010) [Google Scholar]
  13. M. J. Hurley, E. R. Rosenbaum, Performance-Based Fire Safety Design (CRC Press, Boca Raton, 2015) [Google Scholar]
  14. N. Hofstra, B. Petkova, W. Dullaert, G. Reniers, S. de Leeuw, Assessing and facilitating warehouse safety, Saf. Sci. 105, 134 (2018) [CrossRef] [Google Scholar]
  15. D.M.I. 9-3-2007: Prestazioni di resistenza al fuoco delle costruzioni nelle attività soggette al controllo del Corpo Nazionale dei Vigili del Fuoco, Italy (2007) [Google Scholar]
  16. Lettera Circolare n. 414/4122 sott. 55 del 28-3-2008: DM 9 marzo 2007 – Prestazioni di resistenza al fuoco delle costruzioni nelle attività soggette al controllo del CNVVF. Chiarimenti ed indirizzi applicativi, Italy (2008) [Google Scholar]
  17. UNI EN 1991-1-2: Basi di calcolo e azioni sulle strutture – Azioni sulle strutture esposte al fuoco, Italy (1991) [Google Scholar]
  18. A. H. Buchanan, A. K. Aku, Structural Design for Fire Safety (John Wiley & Sons, 2017). [Google Scholar]
  19. Comportamento al fuoco dei materiali, dei componenti costruttivi e degli arredi, ANIA (Associazione Italiana fra le Imprese Assicuratrici), Edizione 1986 (1986) [Google Scholar]
  20. ISO 1716:2002, Reaction to fire tests for building products - Determination of the heat of combustion (2002) [Google Scholar]
  21. ISO 5660:2015, Reaction-to-fire tests - Heat release, smoke production and mass loss rate Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) (2015) [Google Scholar]
  22. ISO 9705-1:2016, Reaction to fire tests - Room corner test for wall and ceiling lining products - Part 1: Test method for a small room configuration (2016) [Google Scholar]
  23. BS EN 45545-1:2013, Railway applications. Fire protection on railway vehicles. General (2013) [Google Scholar]
  24. EN 50399:2011, Reaction to fire test, Common test method for cables under fire conditions – Heat release and smoke production measurement on cables during flame spread test (2011) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.