Open Access
| Issue |
MATEC Web Conf.
Volume 290, 2019
9th International Conference on Manufacturing Science and Education – MSE 2019 “Trends in New Industrial Revolution”
|
|
|---|---|---|
| Article Number | 01012 | |
| Number of page(s) | 9 | |
| Section | Design, Manufacturing and Management of Technological Equipment and Systems | |
| DOI | https://doi.org/10.1051/matecconf/201929001012 | |
| Published online | 21 August 2019 | |
- P. Maćkowiak, M. Kotyk, P. Kabat, R. Tomkiewicz, D. Magdziarz, Developments In Mechanical Enginering, 7(4) (2016) [Google Scholar]
- M. Allen, W. Chen, C. Wang, 3D Printing Standards and Verification Services, University of California, Berkeley (2015) [Google Scholar]
- R. H. Sanatgar, C. Campagne, V. Nierstrasz, Appl Surf Sci., Elsevier, 403 (2017) [Google Scholar]
- N. Hopkinson, R. Hague, P. Dickens, Rapid Manufacturing: An Industrial Revolution for the Digital Age, Wiley (2006) [Google Scholar]
- S. Dul, L. Fambri, A. Pegoretti, Compos Part A Appl Sci Manuf., 85 (2016) [Google Scholar]
- R. E. Williams, V. L. Kormaragiri, P. R. Bishu, J Mater Process Tech., 61(1–2) (1996) [Google Scholar]
- C. K. Chua, C. H. Wong, W. Y. Yeong, Standards, Quality Control, and Measurement Sciences in 3D Printing and Additive Manufacturing, Academic Press in and imprint of Elsevier (2017) [Google Scholar]
- G. Krolczyk, P. Raos, S. Legutko, Tehnicki Vjesnik-Technical Gazette, 21(1) (2014) [Google Scholar]
- M. Spoerk, J. Gonzalez-Gutierrez, J. Sapkota, S. Schuschnigg, C. Holzer, Plast Rubber Compos. 48(1) (2017) [Google Scholar]
- D. Płaczek, P. Maćkowiak, P. Świątkowski, Rozwiązanie konstrukcyjne maszyny wytrzymałościowej do odrywania próbek od stołu drukarki 3D, Nauka niejedno ma imię Tom V, (2017) [Google Scholar]
- M. Kujawa, The influence of first layer parameters on adhesion between the 3D printer’s glass bed and ABS, Interdyscyplinarność badań naukowych, (2017) [Google Scholar]
- C. S. Shafer, D. H. Siddel, A. L. Merriman, A. M. Elliott, Cleated print surface for fused deposition modelling, Solid Freeform Fabrication 2016: Proceedings of the 26th Annual International, (2016) [Google Scholar]
- https://rigid.ink/blogs/news/3d-printed-raft-brim-skirt, (14.12.2018) [Google Scholar]
- http://www.powerspec.com/support/3DPrinters/3DPrintingTips.pdf, Fused filament fabrication (FFF) material properties & considerations, (10.09.2018) [Google Scholar]
- http://hbot3d.com/materials/PLA_Hbot3D.pdf, H BOT3D, PLA Technical data sheet, (15.09.2018) [Google Scholar]
- A. K. Mohanty, M. Misra, T. L. Drzal, Natural fibers, biopolymers, and biocomposites, Taylor & Francis Group, (2005) [Google Scholar]
- P. Maćkowiak, B. Ligaj, Damage of adhesive single lap joint made of materials with different properties under static loading condition, Enginering Mechanics 2017, (2017) [Google Scholar]
- P. Maćkowiak, D. Płaczek, M. Kotyk, Determination of design mechanical properties of adhesives in a tensile and compression test, IOP Conference Series: Materials Science and Engineering, 393 (2018) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.