Issue |
MATEC Web Conf.
Volume 290, 2019
9th International Conference on Manufacturing Science and Education – MSE 2019 “Trends in New Industrial Revolution”
|
|
---|---|---|
Article Number | 02008 | |
Number of page(s) | 10 | |
Section | Management, Modelling and Monitoring of Manufacturing Processes | |
DOI | https://doi.org/10.1051/matecconf/201929002008 | |
Published online | 21 August 2019 |
The possibility of cutting shapes on CNC machine tools
Czestochowa University of Technology, Institute of Mechanical Technologies, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
* Corresponding author: paszta@itm.pcz.pl
The development of computer technology has enabled it to be introduced to machine tools. The widespread use of CNC machine tools has resulted in a rapid development of the processing industry. So far, obtaining the profile of the curve has required the use of a complicated machine tool kinematic design, or it has been impossible to implement it otherwise than by copying. The numerical control of machine tools is based on the mathematical description of motion. This provides the capability to form curves of the same shape but with different dimensions using parametric programs. The article describes the practical use of parameters in machining on an FYS milling machine with Mitsubishi control.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.