MATEC Web Conf.
Volume 290, 20199th International Conference on Manufacturing Science and Education – MSE 2019 “Trends in New Industrial Revolution”
|Number of page(s)||9|
|Section||Design, Manufacturing and Management of Technological Equipment and Systems|
|Published online||21 August 2019|
The optimization of welding regimes for obtaining corrosion resistant welded constructions
”Lucian Blaga” University of Sibiu, Bd-ul. Victoriei 10, Sibiu, Romania
* Corresponding author: email@example.com
Most of the technological equipment has welded metal structures in its composition, which are strongly affected by the corrosion phenomenon. In order to achieve a reduction of the corrosion phenomenon it is very important that the welded joints are made using optimal parameters of the welding regime. In the research were made 6 different welded specimens, respectively 3 for the welded T-shaped joint and 3 for the cross-welded joint. The welded joints were made of 10 mm thick using S 355JR steel by the MAG welding process and using welding wire G4 Si 1 as an additive. For the 6 specimens were made analyzes of the metallographic structure thus observing what are parameters of the welding regime that allows to obtain the welded joints with high corrosion resistance.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.