MATEC Web of Conferences

Open Access

The combined finishing of geometrically-complex parts 01001

Vladislav Smolentsev, Oleg Kirillov and Vasily Kotukov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901001

• Abstract
• PDF (419 KB)
• References

Open Access

Adhesive wear mechanism under combined electric diamond grinding 01002

Vyacheslav Popov, Pavel Arkhipov and Daniel Rychkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901002

• Abstract
• PDF (1.25 MB)
• References

Open Access

Defects in diamonds as the basic adhesion grinding 01003

Vyacheslav Popov, Daniel Rychkov and Pavel Arkhipov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901003

• Abstract
• PDF (1.39 MB)
• References

Open Access

Providing dismountable rivet bonded joints through the use of hot-melt adhesives 01004

Natalia Baurova, Alexander Anoprienko and Yulia Romanova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901004

• Abstract
• PDF (1.20 MB)
• References

Open Access

Intensification of grinding technology and methods for studying the structure of fibrous materials in the process of its production 01005

Aidar Saetshin, Zimfira Valishina, Evgenie Matuhin and Anatoliy Kostochko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901005

• Abstract
• PDF (332 KB)
• References

Open Access

Selection of direct drives for tool and workpiece rotation for gear-hobbing machines of new generation 01006

Vladimir Novikov, Alexey Isaev and Viktor Bushuev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901006

• Abstract
• PDF (1.30 MB)
• References

Open Access

Modeling of induction heating equipment for the vulcanization process 01007

Sergey Karpushkin, Aleksey Glebov and Sergey Karpov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901007

• Abstract
• PDF (501 KB)
• References

Open Access

Design optimization of heating plates for hydraulic presses 01008

Evgeniy Malygin, Mikhail Krasnyanskiy and Vladimir Mokrozub

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901008

• Abstract
• PDF (945 KB)
• References

Open Access

An information model of a hydraulic press and its representation in the automated system 01009

Evgeny Malygin, Vladimir Mokrozub and Vladimir Nemtinov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901009

• Abstract
• PDF (337 KB)
• References

Open Access

The perfection of the construction of a combined cutting tool on the basis of the results of mathematical modelling of working cutting processes in RecurDyn 01010

Vladimir Poddubny, Yuri Kryazhev and Eugene Gorin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901010

• Abstract
• PDF (1.02 MB)
• References

Open Access

The ultrasonic grinding process temperature field study 01011

Alexander Unyanin and Albert Khusainov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901011

• Abstract
• PDF (530 KB)
• References

Open Access

Automation of the early stages of plating lines design 01012

Vladimir Nemtinov, Nikita Bolshakov and Yulia Nemtinova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901012

• Abstract
• PDF (287 KB)
• References

Open Access

The capability of pulsed laser radiation for cutting band saws hardening 01013

Evgeny Marinin, Denis Sergeev and Nadezhda Marinina

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901013

• Abstract
• PDF (1.27 MB)
• References

Open Access

Modelling of destructive ability of water-ice-jet while machine processing of machine elements 01014

Mikhail Burnashov, Alexander Prezhbilov and Elena Stepanova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901014

• Abstract
• PDF (523 KB)
• References

Open Access

Research the quality of the caprolon turning with ceramic cutting tools 01015

Oleg Erenkov, Alexander Ivakhnenko and Victor Protasev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901015

• Abstract
• PDF (965 KB)
• References

Open Access

Electroerosion formation and technology of cast iron coatings on aluminum alloys 01016

Vladislav P. Smolentsev, Oleg N. Fedonin and Eugene V. Smolentsev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901016

• Abstract
• PDF (469 KB)
• References

Open Access

On the estimation of feasibility of engineering services use by machine-building enterprises 01017

Ramil Mavlioutov, Ekaterina Butenko and Regina Menyailova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901017

• Abstract
• PDF (291 KB)
• References

Open Access

Prospects for the development of the theory of designing optimal cycles of machining in a multidimensional space of control parameters 01018

Aleksandra Akintseva and Pavel Pereverzev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901018

• Abstract
• PDF (2.60 MB)
• References

Open Access

Complex optimization of parameters for controlling the cycle of internal grinding by the method of dynamic programming 01019

Aleksandra Akintseva and Pavel Pereverzev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901019

• Abstract
• PDF (859 KB)
• References

Open Access

Influence of technological factors of blade processing on the forming of the defect layer 01020

Julius L. Tchigirinsky and Trong Ngo Quang

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901020

• Abstract
• PDF (318 KB)
• References

Open Access

Influence of value of the criterion of blunting on the selection of the brand of hard alloy and optimum cutting speed when turning austenitic steel 01021

Andrew A. Lipatov and Julius L. Tchigirinsky

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901021

• Abstract
• PDF (570 KB)
• References

Open Access

Problems of modernization and technical re-equipment of Russian machine-building enterprises 01022

Olga Antonyan, Elena Karpushko and Anna Solovyeva

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901022

• Abstract
• PDF (238 KB)
• References

Open Access

Research of vibration resistance of non-rigid shafts turning with various technological set-ups 01023

Sergey L. Vasilevykh and Evgeniy S. Shelihov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901023

• Abstract
• PDF (422 KB)
• References

Open Access

Method of increasing durability of thin-walled structural elements 01024

Vladimir Mironov, Olga Lukashuk and Dmitriy Ogorelkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901024

• Abstract
• PDF (835 KB)
• References

Open Access

Neural network management of technological systems at the finish operations 01025

Irina Ovsyanikova and Aleksandr Tarapanov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901025

• Abstract
• PDF (333 KB)
• References

Open Access

Scanning the welded seams of titanium alloys by using subminiature eddy current transducers 01026

Sergey Dmitriev, Vladimir Malikov and Anatoly Sagalakov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901026

• Abstract
• PDF (394.1 KB)
• References

Open Access

Quantitative evaluation of the effectiveness of best available technologies of form-shaping 01027

Leonid Shvartsburg, Elena Butrimova and Olga Yagolnitser

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901027

• Abstract
• PDF (356 KB)
• References

Open Access

Engineering support of production of high-precision component assemblies 01028

Alexandr Nazaryev and Petr Bochkarev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901028

• Abstract
• PDF (2.60 MB)
• References

Open Access

Problems of ineffective modernization at industrial enterprises and ways of their solution 01029

Dmitry Kiselev, Yuri Popov and Olga Kanygina

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901029

• Abstract
• PDF (286 KB)
• References

Open Access

Development of the mechanical engineering complex on the basis of the improvement of large and small businesses relations 01030

Svetlana Sokolova, Mikhail Belyaev and Victoria Batmanova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901030

• Abstract
• PDF (301 KB)
• References

Open Access

Nonlinear phenomena in a high–power heating unit with pulse modulated control 01031

Yuriy Alexsandrovich Gol'tsov, Alexander Stepanovich Kizhuk and Vasiliy Grigorievich Rubanov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901031

• Abstract
• PDF (569 KB)
• References

Open Access

Monitoring of the stress-strain state of the surface layer of a part in the cutting process using vibroacoustic diagnostics 01032

Dmitry Allenov, Mikhail Kozochkin and Irina Andryushchenko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901032

• Abstract
• PDF (633 KB)
• References

Open Access

Technological system self-tuning when milling 01033

Aleksandr Kozlov, Evgenij Kiryuschenko and Andrej Kirichek

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901033

• Abstract
• PDF (784 KB)
• References

Open Access

Effect of changing polarity of graphite tool/ Hadfield steel workpiece couple on machining performances in die sinking EDM 01034

Haci Bekir Özerkan

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901034

• Abstract
• PDF (535 KB)
• References

Open Access

Increasing the capabilities of machining attachments by means of ferromagnetic liquids 01035

Alexander Alexandrovich Boldyrev, Alexander Ivanovich Boldyrev and Oleg Nikolaevich Fedonin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901035

• Abstract
• PDF (330 KB)
• References

Open Access

Modelling of cutting block cut surface at faceted surfaces machining using planetary gear set 01036

Vadim Kuts, Mikhail Razumov and Nikolay Kalutskikh

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901036

• Abstract
• PDF (855 KB)
• References

Open Access

Optical diagnostics of selective laser melting and monitoring of single-track formation 01037

Andrey Gusarov, Dmitriy Kotoban and Ivan Zhirnov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901037

• Abstract
• PDF (2.31 MB)
• References

Open Access

Increasing of the carbide cutting tool life by developing the multilayer coatings 01038

Vladimir Tabakov, Aleksey Chikhranov and Sergei Sizov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901038

• Abstract
• PDF (363 KB)
• References

Open Access

Design of the tool for periodic not evolvent profiles 01039

Roman Anisimov and Alexander Tarapanov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901039

• Abstract
• PDF (1.46 MB)
• References

Open Access

Modern problems of energy efficiency programs implementation at the enterprises of mechanical engineering 01040

Natalia Borisova, Alexander Borisov and Oleg Dushko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901040

• Abstract
• PDF (324 KB)
• References

Open Access

Calculation method and simulation of work of the ring elastic compensator for sheet-forming 01041

Volodymyr Kukhar, Elena Balalayeva and Oleg Nesterov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901041

• Abstract
• PDF (1.64 MB)
• References

Open Access

The relationship of cutting force with hole quality in drilling process of AISI H13 steel 01042

İsmail Tekaüt, Halil Demir and Ulvi Şeker

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901042

• Abstract
• PDF (1.02 MB)
• References

Open Access

Determination of the profile of the worm-type tool 01043

Aleksandr Golovko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901043

• Abstract
• PDF (968 KB)
• References

Open Access

Method for measuring thermo-emf of a “tool-workpiece” natural thermocouple in chip forming machining 01044

Alexander S. Sergeev, Zhanna S. Tikhonova and Tatiana V. Uvarova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901044

• Abstract
• PDF (632 KB)
• References

Open Access

Influence of the surface layer characteristics on the regularities of the cutting process 01045

Dmitriy V. Krainev, Maria Yu. Polyanchikova and Alexander A. Bondarev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901045

• Abstract
• PDF (372 KB)
• References

Open Access

Methodology of multiaxial machines formats volumetric accuracy comparative evaluation 01046

Svetlana Lukina and Igor Manaenkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901046

• Abstract
• PDF (543 KB)
• References

Open Access

Phase-chronometric measuring systems for the provision of technological processes and diagnostics of the production of electromechanical engineering systems 01047

Ekaterina Tumakova and Aleksandr Komshin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901047

• Abstract
• PDF (814 KB)
• References

Open Access

The use of measuring phase-chronometric systems in the production of cyclic aggregates of aircraft 01048

Ekaterina Metelkina and Aleksandr Komshin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901048

• Abstract
• PDF (1.57 MB)
• References

Open Access

Phasechronometric measuring technologies application for turning tool wear monitoring 01049

Anthony Syritsky

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901049

• Abstract
• PDF (1.05 MB)
• References

Open Access

The additive technology for obtaining thermal storages based on nanomodified materials 01050

Alexander Shchegolkov, Pavel Borovskikh and Larisa Shirshova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901050

• Abstract
• PDF (405 KB)
• References

Open Access

Technological supporting performance of machines and mechanisms 01051

Oleg Burlachenko, Yuri Serdobintsev and Alexander Lyashenko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901051

• Abstract
• PDF (370 KB)
• References

Open Access

Equipment and technologies of air-plasma spraying of functional coatings 01052

Viktor Kuzmin, Igor Gulyaev, Dmitry Sergachev, Sergey Vaschenko, Elena Kornienko and Alexander Tokarev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901052

• Abstract
• PDF (1.67 MB)
• References

Open Access

Manufacturing of thin-walled parts for machinery by selective laser melting 01053

Vitaliy Bobyr, Artem Deev, Anton Zhukov and Pavel Kuznetsov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901053

• Abstract
• PDF (862 KB)
• References

Open Access

Mathematical models for estimating the degree of influence of major factors on performance and accuracy of coordinate measuring machines 01054

Alexander F. Rezchikov, Andrei V. Kochetkov and Oleg V. Zakharov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901054

• Abstract
• PDF (780 KB)
• References

Open Access

Study of the impact of treatment modes on hardness, deformability and microstructure of VT6 (Ti-6Al-4V) and VV751P (Ni-15Co-10Cr) alloy samples after selective laser sintering 01055

Natalia V. Galkina, Ekaterina A. Nosova and Andrey V. Balaykin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901055

• Abstract
• PDF (1.32 MB)
• References

Open Access

Direct formation of surface layer’s quality parameters during combined treatment of two-phase stainless steel blanks 01056

Eugeny Kiselev and Oleg Blagovskiy

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901056

• Abstract
• PDF (328 KB)
• References

Open Access

The high-performance machining of the curved surfaces with the progressive cutting geometry of the end mill 01057

Alexander Khramov, Evgeniy Kiselev and Evgeniy Leksin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901057

• Abstract
• PDF (1.48 MB)
• References

Open Access

Analysis of mechanism of carbide tool wear and control by wear process 01058

Hoang Trung Pham and Julius. L. Tchigirinsky

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901058

• Abstract
• PDF (619 KB)
• References

Open Access

Power characteristics of the metal compounds formation process during the friction stir welding 01059

Radmir Rzaev, Alexander Chularis and Larisa Semyenova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901059

• Abstract
• PDF (870 KB)
• References

Open Access

Experimental implementation of direct laser alloying 01060

Anton Vladimirovich Sotov, Anton Vasilevich Agapovichev and Vitaly Genadievich Smelov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901060

• Abstract
• PDF (1.40 MB)
• References

Open Access

Analytical study of modular cutting tools dynamic properties 01061

Svetlana Lukina and Margarita Krutyakova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901061

• Abstract
• PDF (354 KB)
• References

Open Access

Functional modelling for the automated control system of a threaded joints, such as threaded plug gauges 01062

Mihail Shutikov, Jurij Solomencev, Alexandr Feofanov and Tat'jana Grishina

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901062

• Abstract
• PDF (359 KB)
• References

Open Access

Solution of the problem of negative value of the linear technological size 01063

Vasilii Masyagin, Ruslan Bazhenov and Andrei Muholzoev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901063

• Abstract
• PDF (314 KB)
• References

Open Access

An algorithm for controlling of cutting speed based on soft calculations 01064

Maxim Bobyr, Mariya Luneva and Alexsey Yakushev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901064

• Abstract
• PDF (776 KB)
• References

Open Access

The study of the process of chip segmentation in case of edge cutting machining of titanium alloy 01065

Dmitry Sergeevich Ponyatov, Vyacheslav Petrovich Alekseev and Alexandr Isaakovich Khaimovich

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901065

• Abstract
• PDF (1.38 MB)
• References

Open Access

Analysis of the structure of random packings of powder particles in laser additive technologies 01066

Oleg Kovalev, Andrey Gusarov and Vitaly Belyaev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901066

• Abstract
• PDF (1.28 MB)
• References

Open Access

The design of lightweight gas turbine engine parts using topology optimization 01067

Aleksandra Dubrovskaya, Konstantin Dongauzer and Rustam Faskhutdinov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901067

• Abstract
• PDF (775 KB)
• References

Open Access

Improvement of tribotechnological properties of oil-based cutting fluids by adding dry lubricants 01068

Dilyaver Abdulgazis, Ervin Umerov and Umer Abdulgazis

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901068

• Abstract
• PDF (524 KB)
• References

Open Access

Ensuring stable quality of ground parts by monitoring the process system parameters 01069

Elmar Yagyaev and Boris Shron

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901069

• Abstract
• PDF (313 KB)
• References

Open Access

Role of laser radiation in activating anodic dissolution under electrochemical machining of metals and alloys 01070

Kharis Rakhimyanov, Nadezhda Gaar and Aleksandr Loktionov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901070

• Abstract
• PDF (953 KB)
• References

Open Access

Twin-cutter form turning of commutator rings using cutters’ progressive motion piezoelectric engines 01071

Andrey Vozhzhov, Eugene Pashkov, Vasiliy Golovin and Pavel Florya

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901071

• Abstract
• PDF (687 KB)
• References

Open Access

Numerical studies to determine spatial deviations of a workpiece that occur when machining on CNC machines 01072

Roman Yu. Nekrasov, Igor V. Solovyov, Alexander I. Starikov, Yulia A. Tempel and Olga A. Tempel

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901072

• Abstract
• PDF (419 KB)
• References

Open Access

Innovative model of business process reengineering at machine building enterprises 01073

Roman Yu. Nekrasov, Yulia A. Tempel, Olga A. Tempel and Boris V. Barbyshev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901073

• Abstract
• PDF (829 KB)
• References

Open Access

Role of adhesive interaction centers in control of chip formation and cutter wear 01074

Vladimir.A. Kim, Boris Ya. Mokritskii and Anna V. Morozova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901074

• Abstract
• PDF (2.09 MB)
• References

Open Access

High-temperature thermomechanical treatment of hollow track pins of track-type machines 01075

Andrei Zasypkin, Vyacheslav Dement'yev and Mikhail Sterkhov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901075

• Abstract
• PDF (435 KB)
• References

Open Access

Influence of rigidity of the hardened parts on forming the shape accuracy during flat grinding 01076

Yakov I. Soler, Nguyen Van Le and Mai Dinh Si

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901076

• Abstract
• PDF (703 KB)
• References

Open Access

The technological methods of surface layer modification in construction materials 01077

Vladislav Smolentsev and Sergey Safonov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901077

• Abstract
• PDF (476 KB)
• References

Open Access

Theoretical-probabilistic model of the rotary belt grinding process 01078

Sergey Bratan, Aleksandr Kolesov, Stanislav Roshchupkin and Tatyana Stadnik

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901078

• Abstract
• PDF (510 KB)
• References

Open Access

Identification of removal parameters at combined grinding of conductive ceramic materials 01079

Sergey Bratan, Stanislav Roshchupkin, Alexandr Kolesov and Boris Bogutsky

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901079

• Abstract
• PDF (365 KB)
• References

Open Access

Forecasting the surface roughness of the workpiece in the round external grinding 01080

Yurij Novoselov, Vladimir Bogutsky, Leonid Shron and Alexander Kharchenko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901080

• Abstract
• PDF (674 KB)
• References

Open Access

Parametric synthesis of assembly device for fitting rubber sealing ring into the inner groove of the basic item 01081

Aleksey Tarakhovskiy, Sergey Sazonov, Denis Tokarev and Yuriy Moroz

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901081

• Abstract
• PDF (303 KB)
• References

Open Access

Investigation of thermal processes in abrasive pipe sampling 01082

Elena Levchenko and Nikolay Pokintelitsa

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901082

• Abstract
• PDF (660 KB)
• References

Open Access

Improvement of quality of details at round grinding in the conditions of a floating workshop 01083

Sergey Bratan, Ekaterina Vladetskaya and Aleksander Kharchenko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712901083

• Abstract
• PDF (4.05 MB)
• References

Open Access

Modern treatment technologies of carbon fibre for ensuring the high strength carbon fibre reinforced plastic production 02001

Vladimir Nelyub and Galina Malysheva

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902001

• Abstract
• PDF (290 KB)
• References

Open Access

Distinctive features of thermal treatment of potential tool steel 70X3G2FTR 02002

Evgeniy Romashkov, Svetlana Krylova and Artur Kuznetsov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902002

• Abstract
• PDF (900 KB)
• References

Open Access

Investigation of the influence of hollow aluminosilicate microspheres on properties of elastomer fire-thermal protective coatings 02003

Victor F. Kablov, Oxana M. Novopol’tseva and Vladimir G. Kochetkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902003

• Abstract
• PDF (567 KB)
• References

Open Access

Peculiarities of heavy electro-mechanical plating on medium carbon steel 30 and 38 ChN3MA 02004

Olga V. Gorozhankina, Yury R. Kopylov and Alexander A. Zhirkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902004

• Abstract
• PDF (935 KB)
• References

Open Access

Dissipation mechanisms under irreversible deformation 02005

Yury Alyushin and Sergey Gorbatyuk

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902005

• Abstract
• PDF (382 KB)
• References

Open Access

Calculation of equivalent magnetic permeability of ferromagnetic materials for modeling of three-dimensional eddy current fields 02006

Sergey Karpushkin, Aleksey Glebov and Sergey Karpov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902006

• Abstract
• PDF (486 KB)
• References

Open Access

Generating multi-component multi-layer coatings type mecraly using multi-cathode magnetron sputtering systems 02007

Valery Kolesnik, Yury Rubanov and Yulia Tokach

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902007

• Abstract
• PDF (727 KB)
• References

Open Access

Developing of porous composites on the basis of bi-polymers with aluminum particles and AlOOH nanoparticles for getting antifriction coatings 02008

Natalia Antonova, Ilya Lisnichenko and Igor Sibirka

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902008

• Abstract
• PDF (2.06 MB)
• References

Open Access

Simulation of boron and carbon fiber composite characteristics of the elasticity 02009

Victor .P. Pavlov, Vilina. M. Kudoyarova and Alexander. A. Philippov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902009

• Abstract
• PDF (334 KB)
• References

Open Access

Mathematical model of the crystallizing blank`s thermal state at the horizontal continuous casting machine 02010

Igor Yu. Kryukov, Sergey M. Gorbatyuk and Margarita G. Naumova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902010

• Abstract
• PDF (549 KB)
• References

Open Access

Heat treatment of composite based on MAX-phases of the Ti-Al-C system 02011

Sergey Galyshev, Pavel Bazhin, Alexander Stolin, Fanil Musin and Vasiliy Astanin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902011

• Abstract
• PDF (892 KB)
• References

Open Access

On aging of high-strength stainless steel 08Cr15Ni5Cu2Ti 02012

Tat’yana Makhneva, Vyacheslav Dement’yev and Sergei Makarov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902012

• Abstract
• PDF (992 KB)
• References

Open Access

World market for nanomaterials: structure and trends 02013

Elena Inshakova and Oleg Inshakov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902013

• Abstract
• PDF (277 KB)
• References

Open Access

Modelling of carbon nanotube functionalization processes 02014

Tatyana Dyachkova, Evgeny Tugolukov and Elena Burakova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902014

• Abstract
• PDF (643 KB)
• References

Open Access

Investigation of the thermophysical properties of the oxide layer formed by microarc oxidation on Al-Si alloy 02015

Natalia Yu. Dudareva, Pavel V. Ivashin and Alexander B. Kruglov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902015

• Abstract
• PDF (882 KB)
• References

Open Access

Influence of Al-Si alloy microstructure on the corrosion resistance of coatings formed by the microarc oxidation method 02016

Natalia.Y. Dudareva, Roman.V. Kalschikov and Liliya.I. Zaynullina

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902016

• Abstract
• PDF (3.23 MB)
• References

Open Access

Development of a model of a homogeneous continuous medium based on the material with defects in the form of hollows 02017

Vadim Poroshin, Andrey Shlishevsky and Ksenia Tsybulya

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902017

• Abstract
• PDF (766 KB)
• References

Open Access

Carbon fiber reinforced magnesium alloy in a Ti-6Al-4V shell 02018

Vasily Astanin, Daniya Nurullina, Adel Zaripova, Pavel Soloviev and Fanil Musin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902018

• Abstract
• PDF (1.33 MB)
• References

Open Access

Nanostructured thin film coatings with different strengthening effects 02019

Yury Panfilov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902019

• Abstract
• PDF (542 KB)
• References

Open Access

Structural investigation of 70Cu/30Fe based cast alloy obtained by combined use of centrifugal casting-SHS process and forging 02020

Vitalii V. Sanin, Michael R. Filonov, Vladimir I. Yukhvid and Yurii A. Anikin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902020

• Abstract
• PDF (1.25 MB)
• References

Open Access

Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability 02021

Ekaterina Nosova, Yaroslav Erisov and Fedor Grechnikov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902021

• Abstract
• PDF (770 KB)
• References

Open Access

Structure and wear resistance of Ti-TiC-TiB layers obtained by non-vacuum electron beam cladding 02022

Olga Lenivtseva, Lyubov Chuchkova and Dina Krivezhenko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902022

• Abstract
• PDF (2.05 MB)
• References

Open Access

Multilayered Nb-Al composite manufactured by explosive welding 02023

Iuliia Maliutina, Daria Lazurenko and Maxim Esikov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902023

• Abstract
• PDF (881 KB)
• References

Open Access

In-situ study of structural evolution of tribological materials using synchrotron radiation 02024

Vladimir Burov, Ivan Bataev and Alexander Smirnov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902024

• Abstract
• PDF (1.00 MB)
• References

Open Access

Experimental research steel grade «Steel 45» to abrasion wear, depending on the exit angle macrostructure fibers on the contact surface 02025

Maksim Gennadievich Allenov, Dmitrii Gennadievich Allenov and Oleg Aleksandrovich Belokurov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902025

• Abstract
• PDF (1.00 MB)
• References

Open Access

Investigation of structure and properties of linear acetylenic carbon coatings for medical polymeric materials 02026

Valentin Morozov, Alexey Zhdanov and Leonid Belyaev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902026

• Abstract
• PDF (957 KB)
• References

Open Access

Effect of drying methods of Al₂O₃-GO powder mixture on the properties and microstructure of sintered composites obtained by spark plasma sintering 02027

Pavel Fokin, Pavel Peretyagin and Anton Smirnov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902027

• Abstract
• PDF (909 KB)
• References

Open Access

Comparative studies on mechanical properties of WC-Co composites sintered by SPS and conventional techniques 02028

Yuri Pristinskiy, Nikita Peretyagin and Nestor Washington Solis Pinargote

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902028

• Abstract
• PDF (957 KB)
• References

Open Access

Study of characteristics of steel specimens after selective laser melting of powder materials MS1 02029

Anton Zhukov, Boris Barakhtin and Artem Deev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902029

• Abstract
• PDF (1.99 MB)
• References

Open Access

Formation of a state with high strength and electrical conductivity in the Cu-0.5%Cr-0.2%Zr alloy 02030

Elena Sarkeeva, Marina Abramova and Wei Wei

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902030

• Abstract
• PDF (934 KB)
• References

Open Access

Effect of cold rolling on microstructure and mechanical properties of Cu-0,5%Cr-0,2%Zr subjected to ECAP with various NUNBERS of passes 02031

Marina Abramova, Elena Sarkeeva and Wei Wei

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902031

• Abstract
• PDF (2.07 MB)
• References

Open Access

Effect of the stacking fault energy on the mechanical properties of pure Cu and Cu-Al alloys subjected to severe plastic deformation 02032

Liliya Zaynullina, Igor Alexandrov and Wei Wei

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902032

• Abstract
• PDF (3.71 MB)
• References

Open Access

Formation and properties of composite nanostructured PEO-coatings on metals and alloys 02033

Dmitry V. Mashtalyar, Igor M. Imshinetsky and Sergey L. Sinebryukhov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902033

• Abstract
• PDF (1000 KB)
• References

Open Access

Multifunctional polymer-containing coatings on magnesium alloys 02034

Dmitry V. Mashtalyar, Konstantine V. Nadaraia and Sergey V. Gnedenkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902034

• Abstract
• PDF (1.34 MB)
• References

Open Access

Simulation of crystalline pattern formation by the MPFC method 02035

Ilya Starodumov, Vladimir Ankudinov and Peter Galenko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902035

• Abstract
• PDF (695 KB)
• References

Open Access

Perspectives and principles of formulation of legal basis of diagnostic quality control of materials and products of nanostructure composites 02036

Gennady K. Baryshev, Igor A. Tutnov and Aleksandr P. Biryukov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902036

• Abstract
• PDF (227 KB)
• References

Open Access

Development of methodical instruments of obtaining, research and control of electrophysical service properties of nanostructure composites 02037

Gennady K. Baryshev, Anastasia S. Kondratyeva and Aleksandr V. Berestov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902037

• Abstract
• PDF (454 KB)
• References

Open Access

Transformation of the microstructure and properties of ultrafine-grained TiNi alloys during the processing by ECAP-conform via the isothermal regime 02038

Anna Churakova, Dmitry Gunderov and Georgy Raab

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902038

• Abstract
• PDF (2.59 MB)
• References

Open Access

Strength and fatigue of an ultrafine-grained Al-Cu-Mg alloy 02039

Elvira Khafizova, Rinat Islamgaliev and Vil Sitdikov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902039

• Abstract
• PDF (874 KB)
• References

Open Access

Structure determination and composite wing spar stress-strain state estimation 02040

Pavel Solovyev, Andrey Gomzin, Yuriy Pervushin, Fanil Musin and Sergey Galyshew

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902040

• Abstract
• PDF (1.19 MB)
• References

Open Access

The use of fluorinated CNTs as epoxy resin modifiers 02041

Alexander N. Blohin, Tatiana P. Dyachkova and Artem K. Sukhorukov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902041

• Abstract
• PDF (1.64 MB)
• References

Open Access

Theoretical and experimental investigations of the formation mechanisms of residual deformations of fibrous layered structure composites 02042

Vitaly N. Paimushin, Sergey A. Kholmogorov and Ildar B. Badriev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902042

• Abstract
• PDF (1005 KB)
• References

Open Access

Determination of parts tolerances in friction knots of grey and nodular cast iron with thermal diffusion platings vanadium and chrome 02043

Alexander A. Veselovsky, Roman R. Dema, Olga B. Kalugina and Sergey P. Nefedyev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902043

• Abstract
• PDF (1.55 MB)
• References

Open Access

Investigation of the structure of wear resistant coatings obtained by plasma powder surfacing 02044

Alexey N. Shapovalov, Olga.B. Kalugina and Roman. R. Dema

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902044

• Abstract
• PDF (5.07 MB)
• References

Open Access

The evolution of the welded joints structure at low cycle fatigue 02045

Ekaterina Poyarkova and Iskander Kuzeev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902045

• Abstract
• PDF (2.77 MB)
• References

Open Access

Non-destructive test of steel structures by conical indentation 02046

Alexey Beskopylny, Andrey Veremeenko, Elena Kadomtseva and Natalia Beskopylnaia

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902046

• Abstract
• PDF (596 KB)
• References

Open Access

Quality assessment of structural steel in mining equipment manufacture 02047

Aleksandr Korotkov and Lidia Korotkova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902047

• Abstract
• PDF (267 KB)
• References

Open Access

Metamaterials based on wedge-shaped electrodynamic structures 02048

Vladimir Mitrokhin, Georgy Kuvyrkin and Dmitry Ryzhenko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712902048

• Abstract
• PDF (446 KB)
• References

Open Access

The application of statistical methods to control the quality of the contact pairs of electrical connectors 03001

Konstantin V. Podmasteryev, Vladimir V. Markov and Anna V. Morozova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903001

• Abstract
• PDF (259 KB)
• References

Open Access

Identifying the objects in the structure of an e-model by means of identified formal parameters in the design and engineering environment 03002

Mariya Lavrentyieva and Aleksey Govorkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903002

• Abstract
• PDF (825 KB)
• References

Open Access

Using a discrete product model to determine the design element junctures 03003

Mariya Lavrentyieva and Aleksey Govorkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903003

• Abstract
• PDF (661 KB)
• References

Open Access

A method for determination of mass-exchange and capacitive characteristics of absorbers for life support systems 03004

Pavel V. Balabanov, Guzel R. Kamaletdinova and Maria G. Muravyeva

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903004

• Abstract
• PDF (328 KB)
• References

Open Access

The evaluation of the correlation between entropy and negentropy in the structure of a technical system 03005

Aleksander Dulesov, Denis Karandeev and Tatyana Krasnova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903005

• Abstract
• PDF (284 KB)
• References

Open Access

Robust stabilization of the multilinked object 03006

Yuliya Lezhnina, Galina Ternovaya and Elena Evsina

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903006

• Abstract
• PDF (381 KB)
• References

Open Access

Numerical simulation of the flow of a gas-liquid medium in a circular channel at cooling a high-temperature metal cylinder with a variable cross-section 03007

Sergey Makarov, Vyacheslav Dement'yev and Tatyana Makhneva

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903007

• Abstract
• PDF (791 KB)
• References

Open Access

The study of the possibility of using innovative technologies for saving engineering 3d objects 03008

Ekaterina Sokolova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903008

• Abstract
• PDF (766 KB)
• References

Open Access

Analysis of the time reserve influence on the technological cell productivity 03009

Yuriy E. Obzherin, Stanislav M. Sidorov and Sergey N. Fedorenko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903009

• Abstract
• PDF (363 KB)
• References

Open Access

Automated decision-making system based on genetic algorithm in managing maintenance process 03010

Aleksey Nikishenko, Elena Boyko and Yuriy Obzherin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903010

• Abstract
• PDF (345 KB)
• References

Open Access

Analytical evaluation of the roller bearing service life 03011

Aleksey Antsupov, Viktor Antsupov and Mikhail Slobodianskii

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903011

• Abstract
• PDF (617 KB)
• References

Open Access

An approach to building a cross-platform system for the collection and processing of diagnostic information about working technological equipment for industrial enterprises 03012

Petr A. Nikishechkin, Ilya A. Kovalev and Anatolii N. Nikich

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903012

• Abstract
• PDF (478 KB)
• References

Open Access

Pareto optimization using the method of ant colony 03013

Olga Chengar, Elena Savkova, Elena Vladimirova and Nikolay Sapozhnikov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903013

• Abstract
• PDF (523 KB)
• References

Open Access

Mathematical modelling of electrode systems of electrostatic filtration processes 03014

Leonid Ivanovich Koltunov and Alexander Stepanovich Kizhuk

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903014

• Abstract
• PDF (471 KB)
• References

Open Access

Analysis of quality characteristics in the multicriteria synthesis problem of the production schedule 03015

Olga Chengar, Elena Mashchenko, Darya Zamorenova and Andrey Phedosov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903015

• Abstract
• PDF (1.03 MB)
• References

Open Access

Component simulation in problems of calculated model formation of automatic machine mechanisms 03016

Igor Telegin, Alexander Kozlov and Alexander Zhirkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903016

• Abstract
• PDF (1.32 MB)
• References

Open Access

Numerical solution of the model problem of CCRF-discharge at atmospheric pressure 03017

Viktor Zheltukhin and Violetta Chebakova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903017

• Abstract
• PDF (307 KB)
• References

Open Access

Computer-aided design system for GTE blades electrochemical machining technology 03018

Maksim Nekhoroshev, Nikolay Pronichev and Gennadiy Smirnov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903018

• Abstract
• PDF (817 KB)
• References

Open Access

Prediction of electronic nanodevices technical status and reliability based on analysis of their performance parameters kinetics under the influence of external factors 03019

Mstislav Makeev, Sergey Meshkov and Vladimir Sinyakin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903019

• Abstract
• PDF (538 KB)
• References

Open Access

Research of the combined extremum-seeking control system dynamics on mathematical and computer models 03020

Dmitriy Alexandrovich Bushuev, Vasiliy Grigorievich Rubanov and Dmitriy Vitalyevich Titov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903020

• Abstract
• PDF (1.95 MB)
• References

Open Access

Experimental test of the optimal rotation for the finite stiffness cantilever rod 03021

Aleksandr I. Bokhonsky, Mikhail M. Maistrishin and Aleksandr I. Ryzhkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903021

• Abstract
• PDF (386 KB)
• References

Open Access

Modeling of monitoring processes of structurally heterogeneous technological objects 03022

Аleksandr Skatkov, Victoria Shevchenko, Dmitry Voronin and Dmitriy Moiseev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903022

• Abstract
• PDF (597 KB)
• References

Open Access

Numerical modeling of mechanical behavior of clinch connections at breaking out and shearing 03023

Dmitri V. Berezhnoi, Reza Shamim and Irina S. Balafendieva

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903023

• Abstract
• PDF (353 KB)
• References

Open Access

Interrelation of the concept of “uncertainty” in the information theory and theory of measurements 03024

Vadim Kopp, Alexey Balakin, Natalya Balakina and Vladimir Preys

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903024

• Abstract
• PDF (472 KB)
• References

Open Access

Effectiveness analysis of the kulback’s information measure in the technological objects monitoring 03025

Alexander Skatkov, Alexey Brjuhoveckij and Dmitriy Moiseev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903025

• Abstract
• PDF (438 KB)
• References

Open Access

Recursive estimation of the parts production process quality indicator 03026

Oleg Filipovich, Vadim Kopp, Nataliya Voloshina and Alexander Bokhonsky

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903026

• Abstract
• PDF (470 KB)
• References

Open Access

Test method of distribution functions of the semi-markovian system dwell times in states 03027

Mikhail Zamoryonov, Darya Zamoryonova and Vladimir Preis

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903027

• Abstract
• PDF (730 KB)
• References

Open Access

Semi-markov model of processing requests to the cloud storage 03028

Mikhail Zamoryonov, Victoria Shevchenko, Elena Vladimirova and Nikolay Sapozhnikov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903028

• Abstract
• PDF (329 KB)
• References

Open Access

Feedback linearized trajectory-tracking control of a mobile robot 03029

Aleksey Kabanov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712903029

• Abstract
• PDF (480 KB)
• References

Open Access

Negative valuation of undesirable outputs in evaluating the efficiency of production systems 04001

Chiang Kao

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712904001

• Abstract
• PDF (264 KB)
• References

Open Access

Implementation of statistical process control methods as a way to reduce production costs and improve product quality 04002

Sergey Egorov, Alexey Kapitanov and Dmitriy Loktev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712904002

• Abstract
• PDF (1.03 MB)
• References

Open Access

Metasystem approach to increase the load factor FMS 04003

Alexandr Pishchukhin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712904003

• Abstract
• PDF (487 KB)
• References

Open Access

The development of discrete-address manufacturing planning method 04004

Yuri Polyanskov, Artem Lototsky and Aleksandr Madanov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712904004

• Abstract
• PDF (663 KB)
• References

Open Access

Modeling of reconfigurable manufacturing systems for determining their performance 04005

Alexey Kapitanov and Vladimir Mitrofanov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712904005

• Abstract
• PDF (297 KB)
• References

Open Access

A new paradigm of industrial system optimization based on the conception “Industry 4.0” 04006

Olga Maksimchuk and Tatyana Pershina

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712904006

• Abstract
• PDF (507 KB)
• References

Open Access

Functional management of the economic activities of industrial systems 04007

Elena Matveevaa and Svetlana Simagina

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712904007

• Abstract
• PDF (387 KB)
• References

Open Access

Identification of the technical product characteristics of process scoping studies 04008

Alexander Feofanov, Natal’ja Kim, Evgenij Frolov and Tat’jana Grishina

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712904008

• Abstract
• PDF (329 KB)
• References

Open Access

Pneumatic formwork used in strengthening of structural elements during reconstruction of buildings and structures 05001

Susanna Abramyan, Vladimir Polyakov and Oganes Oganesyan

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905001

• Abstract
• PDF (1.69 MB)
• References

Open Access

The research of contamination regularities of historical buildings and architectural monuments by methods of computer modeling 05002

Andrey A. Kuzmichev, Valeriy N. Azarov and Alexander V. Kuzmichev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905002

• Abstract
• PDF (1.58 MB)
• References

Open Access

Automation of production of concrete mix 05003

Egor Popello and Victoria Gurieva

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905003

• Abstract
• PDF (575 KB)
• References

Open Access

Simulation and estimation of parameters in reconfigurable multipoint forming processes of plates in the creep mode 05004

Konstantin Bormotin, Sergey Belykh and Vin Aung

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905004

• Abstract
• PDF (797 KB)
• References

Open Access

Analysis of the providing environmental safety supervision in construction and reconstruction of facilities in the urban territories 05005

Vadim Bespalov and Ekaterina Kotlyarova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905005

• Abstract
• PDF (257 KB)
• References

Open Access

Creation on the basis of the first theory of strength model equal stressed cylinder exposed to power and temperature loads 05006

Vladimir Andreev and Andrey Leontyev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905006

• Abstract
• PDF (974 KB)
• References

Open Access

Forecasting ofuseful life of the structures of a production building during operation 05007

Valeriya Pshenichkina, Kseniya Suhina and Artem Zhukov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905007

• Abstract
• PDF (302 KB)
• References

Open Access

Calculation of a three-layer plate by the finite element method taking into account the creep of the filler 05008

Anton Chepurnenko, Andrei Savchenko and Svetlana Yazyeva

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905008

• Abstract
• PDF (1.34 MB)
• References

Open Access

Creep calculation for a three-layer beam with a lightweight filler 05009

Viacheslav Chepurnenko, Batyr Yazyev and Xuanzhen Song

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905009

• Abstract
• PDF (300 KB)
• References

Open Access

Energy method in solving the problems of stability for a viscoelastic polymer rods 05010

Serdar Yazyev, Maria Kozelskaya, Grigory Strelnikov and Stepan Litvinov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905010

• Abstract
• PDF (845 KB)
• References

Open Access

Recipe-technological aspects of improving the properties of non-autoclaved aerated concrete 05011

Anatoliy Shuisky, Sergey Stelmakh, Evgeniy Shcherban and Elena Torlina

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905011

• Abstract
• PDF (481 KB)
• References

Open Access

Effect of caustic soda on the intensity of gassing in the production of non-autoclaved aerated concrete 05012

Alexander Halyushev, Mikhail Holodnyak and Muhuma Nazhuyev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905012

• Abstract
• PDF (569 KB)
• References

Open Access

Thin issues products of processing waste heaps as raw materials for ceramic wall products 05013

Vladimir Kotlyar and Khungianos Yavruyan

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905013

• Abstract
• PDF (1.00 MB)
• References

Open Access

Statistical modeling for risk assessment at sudden failures of construction equipment 05014

Tatyana Rogovenko and Marina Zaitseva

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905014

• Abstract
• PDF (442 KB)
• References

Open Access

Technical-economic justification of the choice of heat source autonomous heating schemes 05015

Sergei Tikhomirov, Gennadiy Golubov and Pavel Syichev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905015

• Abstract
• PDF (313 KB)
• References

Open Access

Simulation of the process and system of power plants exhaust gases purification during construction and re-construction of housing and utilities infrastructure of urban areas 05016

Ekaterina Lysova, Oksana Paramonova and Oksana Gurova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905016

• Abstract
• PDF (489 KB)
• References

Open Access

About influence of some superplasticizers on hydration and the structure of hardened cement paste 05017

Yulia Koryanova and Grigory Nesvetaev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905017

• Abstract
• PDF (330 KB)
• References

Open Access

Industrial robots application in the construction of buildings and structures 05018

Gennady Verzhbovskiy and Alexey Reshetnikov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905018

• Abstract
• PDF (1.38 MB)
• References

Open Access

Stability of direct circuits integrating the equations of motion in the simulation of the dynamics of destruction 05019

Leonid Panasjuk and Galina Kravchenko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905019

• Abstract
• PDF (344 KB)
• References

Open Access

Innovative methods of monitoring for deformations of man-made loaded areas 05020

Svetlana Sheina and Lidia Girya

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905020

• Abstract
• PDF (1.97 MB)
• References

Open Access

Nanomodified constructional fiber-reinforced concrete 05021

Vladimir Perfilov and Viktoriya Gabova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712905021

• Abstract
• PDF (338 KB)
• References

Open Access

Protection system of hydraulic drive of road construction machinery 06001

Nikolay Fomenko, Oleg Burlachenko and Maxim Ivanov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906001

• Abstract
• PDF (311 KB)
• References

Open Access

Prediction of leakage in the fixed mechanical seal 06002

Anatoly A. Asheichik and Mohammad Reza Bahrami

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906002

• Abstract
• PDF (583 KB)
• References

Open Access

Optimization of geometry of the sealing cuff of the piston of volumetric oil and gas hydraulic aggregates 06003

Oleg Dushko, Vladimir Perfilov and Vladimir Yaroshik

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906003

• Abstract
• PDF (392 KB)
• References

Open Access

Methods and means for the in-house training of mining machine operators 06004

Vladimir Velikanov, Natalja Dyorina and Azat Abdrakhmanov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906004

• Abstract
• PDF (400 KB)
• References

Open Access

The system of monitoring of epilepsy in a sleep 06005

Alexey Gorbunov, Vladimir Podolskiy and Vladimir Egorov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906005

• Abstract
• PDF (311 KB)
• References

Open Access

Evaluation of residual stresses in lock valve elements of petrochemical productions 06006

Elena Nikolaeva and Artem Mashukov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906006

• Abstract
• PDF (1.94 MB)
• References

Open Access

The parameter’s optimization of the meteorological rocket’s correcting engine to reduce the zone of the used blocks’ falling 06007

Nicholas Mitiukov, Timothey Kasatkin and Guzalia Samigullina

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906007

• Abstract
• PDF (466 KB)
• References

Open Access

Fracture strength for metal structure of a crane 06008

Vladimir Mironov, Olga Lukashuk and Dmitriy Ogorelkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906008

• Abstract
• PDF (791 KB)
• References

Open Access

Influence of the track gradient on the contact temperature at the wheel-rail zone for open-pit locomotives 06009

Ambartsum Keropyan, Alla Gerasimova and Kirill Goloshapov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906009

• Abstract
• PDF (892 KB)
• References

Open Access

Impact of the liquid level in the jet-film contact devices on the heat-and-mass transfer process 06010

Oksana S. Dmitrieva, Andrey V. Dmitriev, Ilnur N. Madyshev and Leonid V. Kruglov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906010

• Abstract
• PDF (892 KB)
• References

Open Access

Compressible material flow in cylindrical channel with variable cross section 06011

Elena Pryanishnikova, Nadezhda Belyaeva and Alexandr Stolin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906011

• Abstract
• PDF (461 KB)
• References

Open Access

Development of criteria for a magnetic hydrocyclones 06012

Boris Avdeyev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906012

• Abstract
• PDF (670 KB)
• References

Open Access

Eigenvibrations of a bar with load 06013

Anton A. Samsonov, Sergey I. Solov´ev and Pavel S. Solov´ev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906013

• Abstract
• PDF (329 KB)
• References

Open Access

Finite difference approximation of electron balance problem in the stationary high-frequency induction discharges 06014

Sergey I. Solov´ev, Pavel S. Solov´ev and Violetta Yu. Chebakova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906014

• Abstract
• PDF (288 KB)
• References

Open Access

Role of asphalt paver productivity in direction development of road mechanical engineering 06015

Marina Karpushko and Igor Bartolomei

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906015

• Abstract
• PDF (1.00 MB)
• References

Open Access

Mechanics of unloading of a rough surfaces pre-loaded joint 06016

Peter Ogar, Denis Gorokhov and Elena Ugryumova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906016

• Abstract
• PDF (650 KB)
• References

Open Access

The elastic-plastic contact of a single asperity of a rough surface 06017

Peter Ogar, Denis Gorokhov and Sergey Belokobylsky

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906017

• Abstract
• PDF (657.5 KB)
• References

Open Access

Analysis of vibroprotection characteristics of pneumatic relaxation seat suspension with capability of vibration energy recuperation 06018

Mikhail Lyashenko, Pavel Potapov and Azamat Iskaliev

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906018

• Abstract
• PDF (506 KB)
• References

Open Access

Simulator as a tool of training to modern equipment management 06019

Gulnara Ahmedyanova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906019

• Abstract
• PDF (708 KB)
• References

Open Access

A setup for electrically controlled liquid-phase sorption of organic pollutants on nanostructured materials 06020

Elena Neskoromnaya, Alexander Babkin and Alexander Burakov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906020

• Abstract
• PDF (1.24 MB)
• References

Open Access

Implementation of carbon nanomodification for sorption materials 06021

Alexander Babkin, Elena Neskoromnaya and Irina Burakova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906021

• Abstract
• PDF (1.85 MB)
• References

Open Access

Graphene materials for lead (II) extraction: an equilibrium study 06022

Anastasia Kucherova, Irina Burakova and Alexandr Burakov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906022

• Abstract
• PDF (2.94 MB)
• References

Open Access

Kinematic research of closed planetary gears 06023

Ildar Kutlubaev, Elena Matcko and Olga Panfilova

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906023

• Abstract
• PDF (318 KB)
• References

Open Access

Analysis of the numerical results of the melting paraffin corks, ensuring the safe operation of the pipeline using a mobile source of electromagnetic radiation 06024

Vera Titarenko

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906024

• Abstract
• PDF (720 KB)
• References

Open Access

Simulation of pump performance control schemes with the use of the virtual model of the process 06025

Julia Nikolaevna Zatsarinnaya, Nataliya Аlexandrovna Staroverova and Alla Grigorevna Logacheva

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906025

• Abstract
• PDF (245 KB)
• References

Open Access

Vibration decrease of electromechanical actuators based on roller screw mechanisms 06026

Valentin Morozov, Pavel Fadeev, Dmitri Shtych, Leonid Belyaev and Alexey Zhdanov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906026

• Abstract
• PDF (1.13 MB)
• References

Open Access

Investigation of stress-strain state in the flywheel and estimation their specific energy capacity 06027

Dmitri V. Berezhnoi, Lejsan R. Gajnulina and Andrej A. Sachenkov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906027

• Abstract
• PDF (307 KB)
• References

Open Access

Тhe device to improve the working element of the rotary trench excavator in the production process of breaking a main pipeline 06028

Asvar Akhmedov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906028

• Abstract
• PDF (2.09 MB)
• References

Open Access

Improving the quality of transient response during automatic control of the turn of a tracked vehicle based on the implementation of structured input shapers 06029

Igor Taratorkin, Victor Derzhanskii and Alexander Taratorkin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906029

• Abstract
• PDF (434 KB)
• References

Open Access

Problems of wave dynamics of the systems that support moving loads 06030

Sergey I. Gerasimov, Vladimir I. Erofeev and Alexey O. Malkhanov

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906030

• Abstract
• PDF (520 KB)
• References

Open Access

Simulation of heat losses and temperature of blast furnaces tuyeres 06031

Yuriy Tarasov, Alexandr Radyuk and Sergey Gorbatyuk

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906031

• Abstract
• PDF (549 KB)
• References

Open Access

System of information output to electronic maps about vessels and aircrafts movement 06032

Vitaly Vergeichik, Vadim Kramar, Veronika Dushko and Andrey Volodin

Published online: 07 November 2017

DOI: https://doi.org/10.1051/matecconf/201712906032

• Abstract
• PDF (438 KB)
• References