Open Access
| Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
|---|---|---|
| Article Number | 01039 | |
| Number of page(s) | 5 | |
| Section | Modern Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201712901039 | |
| Published online | 07 November 2017 | |
- R.V. Anisimov, A.S. Tarapanov, Modern technologies and the equipment for a gear shaping of wheels with internal teeths, Regional scientific and practical conference of young scientists and graduate students «Scientific capacity of Orlovschina in modernization of an industrial complex of the small cities of Russia», p. 4–8 (2010) [Google Scholar]
- K. D. Bouzakis, Manufacturing of cylindrical gears by generating cutting processes, A critical synthesis of analysis methods, CIRP Annals-Manufacturing Technology, 57 p. 676–696 (2008) [Google Scholar]
- S.I. Brusov, M.V. Zhuplov, A.S. Tarapanov, The description of an initial helicoid when profiling screw-cutting tools, News Oryol GTU. Fundamental and applied problems of the equipment and technology No-3 p. 18–23 (2007) [Google Scholar]
- R.V. Anisimov, Improvement of quality of details of vehicles with internal teeths of not evolvent profile, Topical issues of innovative development of a transport complex. Materials of the International scientific and practical conference, 91–95 (2011) [Google Scholar]
- G. Figliolini, P. Rea, Effects of the design parameters of involute gears generated by rack-cutters International Gear Conference 294 (2014) [Google Scholar]
- M.V. Zhuplov, Interactive profiling of disk mills for processing of compound half-closed helicoids on the basis of three-dimensional display of the scheme of profiling, News Oryol GTU. Fundamental and applied problems of the equipment and technology No 2-3/274 (560) p. 24–29 (2009) [Google Scholar]
- M.V. Zhuplov, S.I. Brusov, A.S. Tarapanov, An integrated approach in profiling and a research of processing of helicoids, Problems of quality of machines and their competitiveness: materials of the 6th international scientific and technical conference p. 269–270 (2008) [Google Scholar]
- R.V. Anisimov, S.I. Mironov, Mathematical display of schemes of cutting and determination of thickness of the cut-off layer when processing not evolvent profiles of cogwheels with internal teeths Fundamental and applied problems of the equipment and technology No 2/3 (280), p. 16–21 (2010) [Google Scholar]
- K. Nagamura, K. Ikejo, F. G. Tutulan, Design and performance of gear pumps with a non involute tooth profile Proceedings of the Institution of Mechanical Engineers, Part B: J of Engineering Manufacture. 218, 699–711 (2004) [Google Scholar]
- R.V. Anisimov, Profiling of gear cutting for wheels with internal not evolvent teeths, Fundamental and application-oriented problems of upgrade of the modern mechanical engineering and metallurgy: The collection of scientific works of the international scientific and technical conference devoted to the 50 anniversary of department of technology of mechanical engineering of LGTU, 11–15 (2012) [Google Scholar]
- M.V. Zhuplov, S.I. Brusov, A.S. Tarapanov, The description of an initial helicoid when profiling screw-cutting tools, News Oryol GTU. Fundamental and applied problems of the equipment and technology No-3 p. 18–23 (2007) [Google Scholar]
- R.V. Anisimov, A.S. Tarapanov, Forecasting of a roughness of processing of cogwheels with internal teeths of not evolvent profile, High technologies in mechanical engineering: Materials of the International scientific and technical conference p. 46–50 (2012) [Google Scholar]
- F.L. Litvin, I. Gonzalez-Perez, A. Fuentes, K. Hayasaka, Design and investigation of gear drives with non-circular gears applied for speed variation and generation of functions, Computer methods in applied mechanics and engineering 45, 3783–3802 (2008) [Google Scholar]
- S.I. Brusov, M.V. Zhuplov, A.S. Tarapanov, Option of definition of a profile of a disk mill for processing of a helicoid on the basis of space mathematical display of the scheme of cutting, High technologies in mechanical engineering: theses of reports of the All-Russian scientific and technical Internet conference with the international participation p. 135–140 (2008) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.