MATEC Web Conf.
Volume 129, 2017International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|Number of page(s)||6|
|Section||Modern Manufacturing Technologies, Tools and Equipment|
|Published online||07 November 2017|
Role of adhesive interaction centers in control of chip formation and cutter wear
Komsomolsk-on-Amur state technical University, 27, Lenin St., Komsomolsk-on-Amur, 681021, Russia
2 Bryansk state technical University, 7, 50 let Oktyabrya bul., Bryansk, 241035, Russia
* Corresponding author: firstname.lastname@example.org
Adhesive processes define the character of chips formation and a tool-wear rate. As a result of the investigation of chip inner surfaces and a cutting face of the tangential cutting plate of LNMX (LNUX) 301940 type (of different manufacturers including Sandvik coromant, Korloy, Kennenmetel, Pramet) after recovery turning a tread of railway thermo-strengthened wheel pairs it is established that there is a possibility of the process control in minimization of continuous chips formation based on the account of peculiarities in the adhesion interaction of the material under machining and the cutting one; a conditional chart of the distribution of bifurcation centers on deformation-energetic scales of tool material and chips is formed; there is developed a cutter plate of the own design minimizing a possibility of continuous chips formation.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.