MATEC Web Conf.
Volume 129, 2017International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|Number of page(s)||4|
|Section||Civil Engineering and Architecture|
|Published online||07 November 2017|
Creep calculation for a three-layer beam with a lightweight filler
Don State Technical University, 344022 Sotsialisticheskaya 162, Russia
* Corresponding author: firstname.lastname@example.org
In the article the technique of calculation of a three-layer beam with a lightweight filler taking into account the creep of the middle layer is given. The problem reduces to a second-order differential equation, which is solved numerically by the method of finite differences. An example of a calculation is presented for a hinged at the ends beam under the action of a uniformly distributed load. The linear Maxwell-Thompson equation is used as the creep law. Solution was performed in software package Matlab.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.