Open Access
Issue
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
Article Number 02009
Number of page(s) 4
Section Advanced Materials and Coatings
DOI https://doi.org/10.1051/matecconf/201712902009
Published online 07 November 2017
  1. Yu.S., Pervushin, Proektirovanie i prognozirovanie mekhanicheskih svojstv odnonapravlennogo sloya iz kompozicionnogo materiala (Designing and predicting the mechanical properties of a unidirectional composite material). (Ufa: UGATU, 2002). (in Russ.) [Google Scholar]
  2. I.G., Zhigun, V.A. Polyakov, Svojstva prostranstvenno-armirovannyh plastikov (Properties of spatially reinforced plastics). (Riga: Zinatne, 1978). (in Russ.) [Google Scholar]
  3. V. V. Vasil'ev, Mekhanika konstrukcij iz kompozicionnyh materialov (Mechanics of composite structures). (M.: Mashinostroenie, 1988). (in Russ.) [Google Scholar]
  4. Kompozicionnye materialy: Spravochnik (Composite materials: Handbook) (M.: Mashinostroenie, 1990). (in Russ.) [Google Scholar]
  5. Yu.A., Mikhajlin, Konstrukcionnye polimernye kompozicionnye materialy (Structural polymeric composite materials) (SPb.: Nauchnye omsnovy i tekhnologii, 2008). (in Russ.) [Google Scholar]
  6. S. A. Lur'e, Yusefi Shakhram, Mekhanika kompozicionnykh materialov i konstrukcij. Vol. 3, No 4, pp. 76-92 (1996). (in Russ.) [Google Scholar]
  7. Spravochnik po kompozicionnym materialam (Handbook of Composite Materials). (M.: Mashinostroenie, 1988). (in Russ.) [Google Scholar]
  8. Yu. I., Dimitrienko, A.P. Sokolov, Vestnik MGTU im. N. E. Baumana. Ser. Estestvennye nauki, No 2, pp. 57–67 (2008). (in Russ.) [Google Scholar]
  9. Yu.I., Dimitrienko, A.P. Sokolov, Vestnik MGTU im. N. E. Baumana. Ser. Estestvennye nauki, No 2. pp. 56–67 (2008). (in Russ.) [Google Scholar]
  10. Yu.I., Dimitrienko, A.P. Sokolov, Informacionnye tekhnologii, No 8. pp. 31–38, (2008). (in Russ.) [Google Scholar]
  11. Ju.I. Dimitrienko, A.I. Kashkarov, Konechno-jelementnyj metod dlja vychislenija jeffektivnyh harakteristik prostranstvenno-armirovannyh kompozitov, Vestnik MGTU im. N.Je. Baumana. Ser. Estestvennye nauki No 2, pp. 95-108 (2002). (in Russ.) [Google Scholar]
  12. Yu.I., Dimitrienko, A.P. Sokolov, A.I. Kashkarov, Aehrokosmicheskie tekhnologii. M.: MGTU im. N. Baumana, pp. 113–114 (2004). (in Russ.) [Google Scholar]
  13. E.K., Ashkenazi, E.V. Ganov, Anizotropiya konstrukcionnykh materialov: Spravochnik (Anisotropy of structural materials: Handbook). (L.: Mashinostroenie, 1972). (in Russ.) [Google Scholar]
  14. Kompozicionnye materialy. T. 2. Mekhanika kompozicionnym materialov (composite materials. Vol. 2. Mechanics of composite materials). (M.: Mir, 1978). (in Russ.) [Google Scholar]
  15. Kompozicionnye materialy. T. 7. Analiz i proektirovanie konstrukcij (composite materials. Vol. 7. Analysis and design of structures). (M.: Mashinostroenie, 1978). (in Russ.) [Google Scholar]
  16. Yu. M. Tarnopol'skij, I. G. Zhigun, V. A. Polyakov, Prostranstvenno-armirovannye kompozicionnye materialy: Spravochnik (Spatially-reinforced composite materials: Handbook). (M.: Mashinostroenie, 1987). (in Russ.) [Google Scholar]
  17. Yu.V., Sokolkin, A. A. Tashkinov. Mekhanika deformirovaniya i razrusheniya strukturno neodnorodnykh tel (Mechanics of deformation and destruction of structurally heterogeneous bodies). (M.: Nauka, 1984). (in Russ.) [Google Scholar]
  18. V.P., Pavlov, Polzuchest' polimernykh kompozicionnykh materialov pri peremennykh povyshennykh temperaturakh. Eksperimental'nye issledovaniya i matematiche skoe modelirovanie (creep of polymer composite materials at variable elevated temperatures. Experimental research and mathematical modeling). (Ufa: Ufimsk. gos. aviac. tekhn. un-t, 2004). (in Russ.) [Google Scholar]
  19. V.P., Pavlov, Teplovaya deformaciya, prochnost' i termovyazkouprugost' stekloplastikov pri vysokoj peremennoj vo vremeni temperature v usloviyakh termodestrukcii. Eksperimental'nye issledovaniya i matematicheskoe modelirovanie (Thermal deformation, strength and thermal viscoelasticity of GRP at a high temperature-variable temperature under thermal destruction conditions. Experimental research and mathematical modeling). (Ufa: Ufimsk. gos. aviac. tekhn. un-t, 2004). (in Russ.) [Google Scholar]
  20. S.G., Lekhnickij Teoriya uprugosti anizotropnogo tela (Theory of elasticity of an anisotropic body). (M.: Nauka, 1977). (in Russ.) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.