Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
---|---|---|
Article Number | 06007 | |
Number of page(s) | 4 | |
Section | Other Related Topics | |
DOI | https://doi.org/10.1051/matecconf/201712906007 | |
Published online | 07 November 2017 |
The parameter’s optimization of the meteorological rocket’s correcting engine to reduce the zone of the used blocks’ falling
1
Moscow Economic Institute, 109390, Moscow, Artyukhinoy st. 6/1, Russian Federation
2
Kalashnikov Izhevsk State Technical University, Graduate School, 426069, Izhevsk, Studencheskaya St. 7, Russian Federation
3
East-Europe Institute, 426008, Izhevsk, Pushkinskaya St. 268, Russian Federation
* Corresponding author: nico02@mail.ru
On the example of the meteorological rocket MMR-06, the optimum parameters of the trajectory correction engine to reduce the zone of the used blocks’ falling was selected. It is shown that the optimum mass and optimal maneuvering time are achieved for engines with the medium-thrust. Low-thrust engines, despite the minimum weight, provide a long maneuver time and because of their large number, the total mass increases. The large-thrust engines are very heavy and capable of causing dangerous lateral overloads.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.