MATEC Web Conf.
Volume 129, 2017International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|Number of page(s)||4|
|Section||Modern Manufacturing Technologies, Tools and Equipment|
|Published online||07 November 2017|
The high-performance machining of the curved surfaces with the progressive cutting geometry of the end mill
Haltec Ltd, 432071 Ulyanovsk, Russia
2 Ulyanovsk State Technical University, 432027 Ulyanovsk, Russia
* Corresponding author: firstname.lastname@example.org
There are some results of practical application of the solid carbide end mill developed in HALTEC Ltd company, using for high-performance machining of curved surfaces of workpieces, which have a complex spatial form. It’s shown how to get high-performance machining of curved surfaces with a multidirectional curvature in heat-treatable and high strength Ti alloy Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.15Si [Ti-6-22-22]. The real experience of the implementation of proposed end mill in the technological process of compressor blade machining is described.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.