Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
---|---|---|
Article Number | 01019 | |
Number of page(s) | 4 | |
Section | Modern Manufacturing Technologies, Tools and Equipment | |
DOI | https://doi.org/10.1051/matecconf/201712901019 | |
Published online | 07 November 2017 |
Complex optimization of parameters for controlling the cycle of internal grinding by the method of dynamic programming
1
South Ural State University, Department of Engineering and Technology, 454080 Chelyabinsk, Lenin Avenue 76, Russian Federationa
2
South Ural State University, Department of Automated Engineering Technology, 76, Lenin Avenue, Chelyabinsk, 454080, Russian Federationa
* Corresponding author: popovaav@susu.ru
The technique of designing the optimal cycles of intragrinding processing which allows performing complex optimization of control parameters is presented. As a mathematical optimization technique the method of dynamic programming is used; it allows to take into account any number of optimized control parameters and constraints of the objective function. In this case, this optimization method is not sensitive to the type of mathematical models of the process and the constraints of the objective function. Complex optimization can simultaneously optimize the parameters of the grinding cycle (the number of cycle stages, feed and allowance for the stages), the cutting speed (billet and circle speed of rotation), parameters of the circle characteristics (hardness, granularity, structure, material of grains and bundle) and parameters of technological adjustments (diameter and height of the circle, circle overtravel).
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.