Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
---|---|---|
Article Number | 01037 | |
Number of page(s) | 6 | |
Section | Modern Manufacturing Technologies, Tools and Equipment | |
DOI | https://doi.org/10.1051/matecconf/201712901037 | |
Published online | 07 November 2017 |
Optical diagnostics of selective laser melting and monitoring of single-track formation
Moscow State University of Technology “STANKIN”, 127994, Vadkovskii per. 1, Moscow, Russia
* Corresponding author: kotobandv@mail.ru
The article presents the optical diagnostics results of the selective laser melting process of single-track production. The track defects detection (such as balling effect, powder free zone formation, sparking) was shown, as well as the visualization of the independent particles consolidation in a solid track. The metal evaporation and the formation of the melt pool specific gas dynamic conditions were considered as important physical phenomena. The velocities of the particle emission from the melt pool, the rate of their involvement, and the velocity of the gas flow were estimated. The results make it possible to evaluate the kinetics of mass transfer under selective laser melting process. The surface thermal field of the laser-irradiated zone strongly influences the material qualitative characteristics after selective laser melting. The results becomes the basis for the development of optical monitoring and diagnostic systems for laser additive manufacturing processes based on the melt pool temperature online controlling.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.