| Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
|---|---|---|
| Article Number | 01015 | |
| Number of page(s) | 5 | |
| Section | Modern Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201712901015 | |
| Published online | 07 November 2017 | |
Research the quality of the caprolon turning with ceramic cutting tools
1
Pacific National University, 680035 Khabarovsk, Russia
2
South-West State University, 305040 Kursk, Russia
3
Tula State University, 300041 Tula, Russia
* Corresponding author: Erenkov@list.ru
The aim of this study is the comparative analysis of caprolon turning with replaceable polyhedral plates made from different materials namely one plate made from wolfram and cobalt alloy VC8 another from ceramic material tungsten free carbide KNT16. The basis of the experimental setup is laboratory research stand STD.201-2 which is used to study the technological system dynamics and the cutting forces registration at turning. The stand functionally consists of the head-tool holder, the interface unit, the sensors connecting module and PC. It is experimentally proved that caprolon turning both with the VC8 alloy cutting plate and the plate made from ceramic material KNT16 is a stable process. This is evidenced by the slight changes values of cutting force main component wherein the range of changes in the case of turning with the ceramic plate is smaller in comparison with the turning option with wolfram and cobalt alloy plate for the selected processing mode.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.