| Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 4 | |
| Section | Advanced Materials and Coatings | |
| DOI | https://doi.org/10.1051/matecconf/201712902007 | |
| Published online | 07 November 2017 | |
Generating multi-component multi-layer coatings type mecraly using multi-cathode magnetron sputtering systems
BSTU after V. G. Shukhov, Kostyukov str., 46, Belgorod, 308012, Russia
* Corresponding author: tokach@bk.ru
The paper presents the results of experiments carried out to obtain multi-component coatings that have a broader range of properties compared to their single-component counterparts. We have studied the generation of coatings based on a Co (18…20%)-Cr (5…7%)-Al (0.3…0.4%)-Y (0.2…0.5) alloy. We have also studied the chemical composition of the coating, its thickness, and the transient zone condition. We present here the results of X-ray fluorescence and X-ray spectroscopy microanalysis of such coatings. It is shown that the microtopography of surfaces depends on the coating generation conditions; the set of chemical elements in each coating is similar for all specimen, their concentration depends on the deposition conditions, and the thickness distribution is constant; there is virtually no diffusion of coating and substrate materials. We have identified an insignificant percentage of substrate materials in the generated coating. The thicker the coating, the less substrate materials it contains.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.