| Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
|---|---|---|
| Article Number | 01038 | |
| Number of page(s) | 4 | |
| Section | Modern Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201712901038 | |
| Published online | 07 November 2017 | |
Increasing of the carbide cutting tool life by developing the multilayer coatings
1
Federal State Budgetary Educational Institution of Higher Education Ulyanovsk State University, Ulyanovsk, Russian Federation
2
Joint-Stock Company Ulyanovsk Design Bureau of Instrumentation, Ulyanovsk, Russian Federation
* Corresponding author: chihranov@mail.ru
The paper presents the results of studying the structural parameters and mechanical properties of multi-element coatings based on-TiZrN, TiZrAlN, TiZrCrN, and TiNbAlN. The phase composition, the structural parameters, and the mechanical properties of such coatings are shown to depend on the design of cathode evaporators and the machine layout at the moment of application. Compared to TiN coating, multi-element coatings have higher residual compressive stress, smaller CSR, higher microdeformations of the crystal lattice, better mechanical properties, yet weaker adhesion to the tool base. Based on studying their structural parameters and mechanical properties, we have designed double-layer coatings. Use of such multi-layer coatings prolongs the tool life of carbide plates compared to TiN coating.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.