| Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
|---|---|---|
| Article Number | 03023 | |
| Number of page(s) | 4 | |
| Section | Modelling of Technical Systems. CAD/CAM/CAE Systems | |
| DOI | https://doi.org/10.1051/matecconf/201712903023 | |
| Published online | 07 November 2017 | |
Numerical modeling of mechanical behavior of clinch connections at breaking out and shearing
Kazan (Volga Region) Federal University, 18 Kremlyovskaya Street, Kazan, 420008, Russian Federation
* Corresponding author: berezhnoi.dmitri@mail.ru
This article describes an approach to constructing the defining relationships between increment of true stresses and true deformations, with considering the contact interaction of elastoplastic deformed bodies among each other. Within the framework of finite element method, solving these problems in case of “breaking out” and “shearing” in the clinch joint, the stress fields in the zone of the clinch connection are defined, and recommendations are given for realizing the process of their creation.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.