MATEC Web Conf.
Volume 129, 2017International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|Number of page(s)||5|
|Section||Advanced Materials and Coatings|
|Published online||07 November 2017|
Developing of porous composites on the basis of bi-polymers with aluminum particles and AlOOH nanoparticles for getting antifriction coatings
Kamensk Institute (Affiliation) of SRSTU (NPI) named after M.I. Platov, 23 K. Marx Ave, Kamensk-Shakhtinsky, 347810, Russia
* Corresponding author: firstname.lastname@example.org
Porous composites on the basis of bi-polymer of natrium-carboxymethylcellulose containing aluminum powder and nano-particles of aluminum oxohydroxide have been developed. With the help of electronic microscopy the sizes of the formed pores were defined: 600 – 1000 μm; the surface porosity of the coating was defined as well, it made 65%. Using methods of x-ray diffraction analysis and infrared spectroscopy it was stated that the phase composition of porous composites remains unchanged in the process of forming. The possibility to form antifriction coatings by filling porous matrixes with solid lubricants is shown on the example of molybdenum disulfide. When applying the coatings to steel surfaces the friction coefficient reduces by 60%. With the help of differential scanning calorimetry the limit of coatings thermo destruction was defined: 300 - 306°C
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.