Free Access to the whole issue

Open Access

Statement of Peer review

Published online: 25 October 2017

• PDF (42.7 KB)

Open Access

About the conference

Published online: 25 October 2017

• PDF (45.3 KB)

Carbon composites

Open Access

Synthesis and Evaluation of Olivine Material Coated with Carbon 01001

Masakazu Togo and Atsushi Nakahira

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713001001

• Abstract
• PDF (599 KB)
• References

Open Access

High-Porosity Carbon Processed from Mixtures of Furfuryl Resin-Poly(ethylene glycol)-Benzenesulfonyl Chloride and Its Application for Catalyzing Tri-iodide Reduction 01002

Shunjian Xu

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713001002

• Abstract
• PDF (686 KB)
• References

Composites of cotton, silk and polymer

Open Access

The Influence of Annealing Process on Crystallinity and Structural Properties of Cotton/Spandex Fabric 02001

Md. Nahid Pervez, Md. Eman Talukder, Manoj Kanti Datta, Md Shipan Mia, Ashaduz Zaman, Meer Md Rasel Khan, Yingjie Cai and Lina Lin

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713002001

• Abstract
• PDF (878 KB)
• References

Open Access

Discussion on Avoidance of Staining Problem in Cotton/CDPET Dyeing 02002

Md. Nahid Pervez, Umarsharif Y. Inamdar, Md. Eman Talukder, Md. Ziaur Rahman, Mst. Munera Khatun, Mst. Zakia Sultana, Yingjie Cai and Lina Lin

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713002002

• Abstract
• PDF (655 KB)
• References

Open Access

Effect of Ring Machine Front Roller Rubber Cot Hardness on Properties of Coarser Yarn 02003

Abdul Rehman Akbar, Muhammad Zeshan, Mohammad Neaz, Yingjie Cai and Lina Lin

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713002003

• Abstract
• PDF (2.07 MB)
• References

Open Access

Preparation and properties of silk sericin/cellulose cross-linking films 02004

Kunyan Wang and Fangyu Zhan

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713002004

• Abstract
• PDF (256 KB)
• References

Composites of metal and ceramic materials

Open Access

Accident tolerant composite nuclear fuels 03001

Barbara Szpunar, Linu Malakkal, Seanne Chung, Momina Mateen Butt, Ericmoore Jossou and Jerzy A. Szpunar

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713003001

• Abstract
• PDF (670.8 KB)
• References

Open Access

Fabrication and property evaluation of WO₃ particles dispersed Al-based composite material 03002

Naoto Nakamura, Seungwon Lee, Tomohiro Takida, Susumu Ikeno and Kenji Matsuda

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713003002

• Abstract
• PDF (1.33 MB)
• References

Open Access

Production of Al-based composite materials including stress-luminescent particles using 3-dimensional penetration casting (3DPC) 03003

Seungwon Lee, Yuta Kusunoki, Naoto Nakamura, Kenji Matsuda, Yuukou Horita, Takahisa Ohji, Kenji Amei, Keiji Shibata and Koji Okino

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713003003

• Abstract
• PDF (897 KB)
• References

Open Access

Synthesis and Evaluation of Zeolite Surface-Modified Perlite 03004

Makoto Kasai, Yosei Kobayashi, Masakazu Togo and Atsushi Nakahira

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713003004

• Abstract
• PDF (822 KB)
• References

Open Access

Electrochemical performance and stability of Ni_1-xCo_x-based cermet anode for direct methane-fuelled solid oxide fuel cells 03005

Wongsawatgul Nicharee, Soamwadee Chaianansutcharit and Kazunori Sato

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713003005

• Abstract
• PDF (991 KB)
• References

Open Access

Effect of Sintering Atmosphere on The Mechanical Properties of Sintered Tungsten Carbide 03006

Salina Budin, Talib Ria Jaafar and Mohd Asri Selamat

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713003006

• Abstract
• PDF (374 KB)
• References

Open Access

Effect of ultrasonic vibration and solution-aging treatment on microstructure and properties of in-situ TiAl₃/7050Al composites 03007

Lili Chen, Zhiming Du, Dan Zhao, Lihua Chen and Changshun Wang

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713003007

• Abstract
• PDF (556 KB)
• References

Open Access

Oxide reinforced Ni base composite prepared by spark plasma sintering 03008

Guoliang Zhu, Shiqi Zhao, Rui Wang, Anping Dong, Liang Zhang, Wenheng Wu, Wei Wang, Sheng Jiang and Yilong Pu

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713003008

• Abstract
• PDF (536 KB)
• References

Open Access

Removing metal debris from thermosetting EMC powders by Nd-Fe-B permanent magnets 03009

Yowching Liaw, Jung-Hua Chou and Shouyen Chao

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713003009

• Abstract
• PDF (551 KB)
• References

Concrete and asphalt materials

Open Access

Engineering Properties and Microstructural Performance of Low Energy Super-Sulfated Cement Using Industrial Waste Anhydrite 04001

Tsung-Yuan Huang, Hoang-Anh Nguyen, Ta-Peng Chang, Chun-Tao Chen and Yu-Wen Liu

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713004001

• Abstract
• PDF (984 KB)
• References

Open Access

Investigation of the Mechanical Property of Low-Activation Concrete 04002

Yu-Cheng Kan, Kuang-Chih Pei and Meng-Hwa Cheng

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713004002

• Abstract
• PDF (524 KB)
• References

Open Access

Investigation of the rebound number and compressive strength of concrete with quarry dust as fine aggregate 04003

Suppachai Sinthaworn

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713004003

• Abstract
• PDF (830 KB)
• References

Open Access

The Synthesis and Characterization of Novel Bis-cationic Asphalt Emulsifier 04004

Xiao-Meng Yu, Lai-Shun Shi, Cun-Fei Ma, Lu Hou, Jing-Wen Kong and Ya-Li Sun

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713004004

• Abstract
• PDF (289 KB)
• References

Open Access

Study on Performance of Steel Fiber Concrete Bridge Pier Specimens under Horizontal Cyclic Loading 04005

Chen Baiben, Feng Zhongren and Shi Xiaoji

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713004005

• Abstract
• PDF (1.11 MB)
• References

Open Access

Preparation and Characterization of Manganese Slag and Fly Ash-based Geopolymer 04006

Ya-guang Wang, Feng-lan Han, Shi-zhen Zhao and Jing-qiu Mu

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713004006

• Abstract
• PDF (609 KB)
• References

Mechanical and thermal features of composites

Open Access

Effect of Strain Rate on Microscopic Deformation Behavior of High-density Polyethylene under Uniaxial Stretching 05001

Takumitsu Kida, Yusuke Hiejima and Koh-hei Nitta

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713005001

• Abstract
• PDF (1.33 MB)
• References

Open Access

Damage behavior of honeycomb sandwich structure under low-energy impact 05002

Jialin Cheng, Zejin Li, Chaolin Shuai, Shuchang Long and Xiaohu Yao

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713005002

• Abstract
• PDF (1.59 MB)
• References

Open Access

Research on process and simulation of the isothermal forging of a spur bevel gear 05003

Zhao Xinhai, Zhao Liangang, Tian Zhirui, Liu Chuanjin and Wu Xianghong

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713005003

• Abstract
• PDF (1.82 MB)
• References

Mechanical properties of composite joints

Open Access

Ultrasonic dissimilar joining of aluminum alloy and polymer with the composite material of ABS polymer doping carbonized rice husk 06001

Chin-Pao Cheng, Chun-Hu Cheng, l-Wen Wang Yu-Chen Chen and Yang-Sheng You

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713006001

• Abstract
• PDF (739 KB)
• References

Open Access

Numerical analysis of the adherends with similar thickness on weld-bonded single lap aluminium joint 06002

Jianli Li, Peng Wang and Min You

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713006002

• Abstract
• PDF (1.02 MB)
• References

Open Access

Effect of main layer thickness on the response of multi layer bonded steel butt joint under Charpy impact test 06003

Jianli Li, Yalan Zhao, Yingying Li and Min You

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713006003

• Abstract
• PDF (574 KB)
• References

Open Access

Simulations about the effect of heat treatment temperatures on the properties of diffusion bonded Mg/Al joints 06004

Yunlong Ding, Jiangang Wang and Dongying Ju

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713006004

• Abstract
• PDF (535 KB)
• References

Synthesis and evaluation of composite materials

Open Access

FEM model-based optimal control synthesis for curing a large composite structure with CAD imported geometry 07001

Sergey Shevtsov, Ilya Tarasov, Vladimir Axenov, Igor Zhilyaev, Jiing-Kae Wu and Natalia Snezhina

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713007001

• Abstract
• PDF (557 KB)
• References

Open Access

Effect of polymer concentration on the lifetime and transmittance behavior of a self-oscillating polymer chain with a high lower critical solution temperature 07002

Tomoka Nakazumi and Yusuke Hara

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713007002

• Abstract
• PDF (462 KB)
• References

Open Access

Influence of the Belousov–Zhabotinsky substrate concentration on the lifetime and self-oscillating behavior of a polymer solution 07003

Tomoka Nakazumi and Yusuke Hara

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713007003

• Abstract
• PDF (399 KB)
• References

Open Access

The theoretical interpretation of the Linear/circularly polarized light-induced molecular orientation of the azo group-containing trans-Achiral Schiff base dinuclear complex composite material 07004

Nobumitsu Sunaga, Takashiro Akitsul, Taro Konomi and Masahiro Katoh

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713007004

• Abstract
• PDF (1.437 MB)
• References

Open Access

Single-component and fast-curing epoxy resin for liquid composite molding processes 07005

Yiru Wang, Wangshuang Liu, Yiping Qiu and Yi Wei

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713007005

• Abstract
• PDF (610 KB)
• References

Open Access

Morphology and Properties of Poly(Lactic Acid) and Ethylene-Methyl Acrylate Copolymer Blends with Organoclay 07006

Sirirat Wacharawichanant, Sirinan Ratchawong, Phakjira Hoysang and Manop Phankokkruad

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713007006

• Abstract
• PDF (950 KB)
• References

Open Access

Synthesis and curing process of TMA-MDI polyamide-imides 07007

Yuhong Qi, Bingnan Ji, Li Li and Zhanping Zhang

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713007007

• Abstract
• PDF (260 KB)
• References

Open Access

The Optimization Design of an Ionic Liquid Composite Material for Nitrogen Removal 07008

Bao-you Liu and Tao Wang

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713007008

• Abstract
• PDF (345 KB)
• References

Open Access

Surface Control of Thermosetting Fluorinated Polyurethane 07009

Dongsheng Cai, Yangsheng Ren, Ying Li and Xia Wang

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713007009

• Abstract
• PDF (529 KB)
• References

Open Access

Study on the preparation and properties of UV curable polyurethane materials modified by organic silicon 07010

Xidan Luo, Xuetao He, Pengcheng Xie, Jianyun He, Yumei Ding and Bingqian Xia

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713007010

• Abstract
• PDF (466 KB)
• References

Thin film and coating technology

Open Access

Thermoelectric Properties of Composite Nanoparticle Array with Protoporphyrin Molecule Junctions 08001

l-Chih Ni and Shien-Der Tzeng

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713008001

• Abstract
• PDF (1003 KB)
• References

Open Access

Preparation and properties of silicone fouling release coatings with long-life afterglow fluorescent 08002

Zhanping Zhang, Hao Li and Yuhong Qi

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713008002

• Abstract
• PDF (922 KB)
• References

Open Access

Study the Influence of the Anodizing Process Parameters on the Anodized Copper Hardness 08003

M.H. Mahmood, Suryanto, Muataz H. F. Al Hazza and Farag I Haider

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713008003

• Abstract
• PDF (919 KB)
• References

Open Access

Si doping superlattice structure on 6H-SiC(0001) 08004

Lianbi Li, Yuan Zang and Jichao Hu

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713008004

• Abstract
• PDF (965 KB)
• References

Open Access

Effect of SiO₂ nanoparticles on the hydrophobic properties of waterborne fluorine-containing epoxy coatings 08005

Xiaofang Liu, Rongwei Wang, Yongkang Fan and Ming Wei

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713008005

• Abstract
• PDF (468 KB)
• References

Open Access

Fabrication and dynamics of two layers vanadium carbide reinforced iron matrix surface composite 08006

Fan Bai, Li-sheng Zhong, Xin Wang, Yun-hua Xu and Zi-yuan Zhao

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713008006

• Abstract
• PDF (975 KB)
• References

Open Access

Electrodeposition of Adherent Polypyrrole Film on Titanium Surface with Enhanced Anti-corrosion Performance 08007

Jilin Tan, Zhong Zhang and Dongtao Ge

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713008007

• Abstract
• PDF (1.21 MB)
• References

Tribology of polymer and composite materials

Open Access

Investigation of subsurface fatigue crack in PEEK shaft under one-point rolling contact by using 2.5D layer observation method 09001

Hitonobu KOIKE, Genya YAMAGUCHI, Koshiro MIZOBE, Yuji KASHIMA and Katsuyuki KIDA

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713009001

• Abstract
• PDF (1.14 MB)
• References

Open Access

Investigation of wear, groove shape and load capacity of PPS-PTFE hybrid radial ball bearings 09002

Hitonobu KOIKE, Katsuyuki KIDA, Toshihiko MATSUMURA, Koshiro MIZOBE and Yuji KASHIMA

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713009002

• Abstract
• PDF (1.06 MB)
• References

Open Access

Rolling Contact Fatigue and Static Compression Deformation of UHMWPE thrust bearing in water 09003

Masahiro Inagaki, Naoki Fujimura, Koushiro Mizobe, Katsuyuki Kida and Yuji Kashima

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713009003

• Abstract
• PDF (626 KB)
• References

Open Access

Observation of fracture behavior of 3-D printed specimens under rolling contact fatigue in water 09004

Koshiro Mizobe, Masahiro Inagaki and Katsuyuki Kida

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713009004

• Abstract
• PDF (1.49 MB)
• References

Open Access

The Study of the Composite Material Go/CF/PTFE Tribological Property 09005

Li-hu Wang, Shou-ren Wang, Dao-sheng Wen, Gao-qi Wang and Li-ying Yang

Published online: 25 October 2017

DOI: https://doi.org/10.1051/matecconf/201713009005

• Abstract
• PDF (1.39 MB)
• References