EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 129 (2017) MATEC Web Conf., 129 (2017) 01036 References
Open Access
Issue
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
Article Number 01036
Number of page(s) 5
Section Modern Manufacturing Technologies, Tools and Equipment
DOI https://doi.org/10.1051/matecconf/201712901036
Published online 07 November 2017
  1. M.S. Razumov, Enhancing Performance of Multi-faceted Outer Surfaces Shape Generation by means of Planetary Gear Set: the author's abstract of the thesis, Candidate in Engineering Science (Kursk, 2011) [Google Scholar]
  2. M.S. Razumov, A.N. Grechukhin, A.O. Gladyshkin, Calculation of the blank twist angle at processing with planetary turning, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230 (18), pp. 3298–3303 (2016) DOI: 10.1177/0954406215608657 [CrossRef] [Google Scholar]
  3. M.S. Razumov, A.O. Gladyshkin, A.I. Pykhtin, Evaluation of rational quantity of profile moment-transferring joints sides / [Procjena racionalne količine stranica profilnih spojeva za prijenos okretnog momenta], Source of the Document Tehnicki Vjesnik 23 (2), pp. 575–577 (2016) DOI: 10.17559/TV-20140614032348 [Google Scholar]
  4. M. Razumov, A. Grechukhin, A. Pykhtin, Determination of Shape Errors during Polygonal Turning of Polyhedrons with an Odd Number of Faces / Procedia Engineering 150, PP. 844–848 (2016) DOI: 10.1016/j.proeng.2016.07.130 [Google Scholar]
  5. A.I. Barbot'ko, M.S. Razumov, A.I. Pykhtin, P.A. Ponkratov Selecting the cutting edge of a shaping tool, Russian Engineering Research 35 (5), pp. 344–346 (2015) DOI: 10.3103/ S1068798X15050068 [Google Scholar]
  6. M. Razumov, Form error calculation during polygonal sharpening of polyhedrons with even number of sides, Metallurgical and Mining Industry 7 (1), pp. 66–69 [Google Scholar]
  7. M.S. Razumov, Technological parameters determination of faced rolls combined treatment / Metallurgical and Mining Industry, 7 (2), pp. 178–182 (2015) [Google Scholar]
  8. M.S. Razumov, A.O. Gladyshkin, E.I. Yatsun, A.A. Zinovkin, O.S. Zubkova, Selection of rational geometrical parameters of profile of moment transmitted connections, Metallurgical and Mining Industry 7 (8), pp. 512–516 (2015) [Google Scholar]
  9. M. Razumov, A. Gladyshkin, V. Kassikhin, A. Pykhtin, E. Skripkina, Stress calculation of moment transmitting roll with profile on the base of Reuleaux triangle, Metallurgical and Mining Industry 7 (8), pp. 512–516 (2014) [Google Scholar]
  10. M.S. Razumov, A.I. Pykhtin, A.V. Maslennikov, Error of polyhedral profiles in single-cutter shaping by means of a planetary mechanism, Russian Engineering Research 32 (9-10), pp. 681–684 (2012) DOI 10.3103 / S1068798X12070180 [Google Scholar]
  11. A.I. Barbot'ko, A.V. Maslennikov, M.S. Razumov, Attachment for clamping bushes when shaping their polyhedral external surfaces, Russian Engineering Research, 31(12), pp. 1253–1254 2011 DOI: 10.3103/S1068798X11120069 [Google Scholar]
  12. Y.A. Maksimenko, V.V. Kuts, Machining by a disk mill of variable radius, Russian Engineering Research, Volume 34, Issue 12, Pages 785–788 (2014) [Google Scholar]
  13. V.V. Kuts, I.V. Kucheryaev, Machine-tool adjustment in machining the housings of composite mills, Russian Engineering Research, Volume 28, Issue 10, Pages 1007–1009 (2008) [Google Scholar]
  14. V.V. Kuts, The profile distortion value calculation for shaped to be machined surface at the CAD/CAM - development for assembled shaped mills, Avtomatizatsiya i Sovremennye Tekhnologii, Issue 11, Pages 5–7 (2004) [Google Scholar]
  15. S.G. Emel'yanov, V.V. Kuts, M.S. Merzhoeva, Graphoanalytical design method of combined core drills equipped with rB eplaceable and indexing cutting inserts, Avtomatizatsiya i Sovremennye Tekhnologii, Issue 11, Pages 19–23 (2003) [Google Scholar]
  16. Y.A. Maksimenko, V.V. Kuts, Analysis of changes in error processing rk-profile shaft with teeth resharpening cutters with radial constructive feed, Spravochnik. Inzhenernyi zhurnal, pp. 008–012 (2014) [Google Scholar]
  17. O. Kuts, A. Gorokhov, A. Prokofiev, Profile simulation of rated workable surface in thin-walled part with small angle of taper and generating surfaces of compound milling cutters, International Conference on Mechanical Engineering, Automation and Control Systems (MEACS), Tomsk, pp. 1–4 (2015) doi: 10.1109/MEACS.2015.7414900 [Google Scholar]
  18. L.G. Vainer, A.G. Ivakhnenko, I.V. Karabanov, Systematic Dynamic Factors in the Shaping of Opposite End Surfaces, Russian Engineering Research 5, pp. 340–345 (2014) [Google Scholar]
  19. A.V. Kirichek, A.G. Ivakhnenko, E.O. Ivakhnenko, A.Y. Altukhov, Geometric Accuracy of the Machines with Strut-Type Structures, International Journal of Applied Engineering Research 21, pp. 995–995 (2014) [Google Scholar]
  20. O. Kuts, A. Gorokhov, A. Prokofiev, Assessment of error in position and orientation of replaceable polyhedral plates in disk milling cutters for profile shafts machining, 2015 International Conference on Mechanical Engineering, Automation and Control Systems (MEACS), Tomsk, pp. 1–5 (2015) doi: 10.1109/MEACS.2015.7414899 [Google Scholar]
  21. A.I. Timchenko, Tekhnologiya izgotovleniya detaley profil'nykh besshponochnykh soedineniy [Manufacturing technology of keyless connection of profile pieces] (Moscow, VNIITEMR, 1988) [Google Scholar]
  22. S.G. Emel'yanov, A.O. Gladyshkin, M.S. Razumov, S.F. Yatsun, Automatization of work preparation of profile rolls, Izvestiya YuZGU 1(1), 113–116. (2012) [Google Scholar]
  23. A.I. Barbot'ko, M.S. Razumov, Lathing of polyhedrons with even number of sides, Vestnik mashinostroeniya, No1, p. 46–48 (2010) [Google Scholar]
  24. A.I. Barbot'ko, P.A. Ponkratov i M.S. Razumov, Metod generatornoy obrabotki profil'nykh valov dolbyakami [Method of generating processing of grooved rolls by form cutters], V Mezhdunarodnaya nauchno-tekhnicheskaya konferentsiya “Mashinostroenie - osnova tekhnologicheskogo razvitiya Rossii (TM-2013)”. Kursk, YuZGU, p.p. 440–442 (2013) [EDP Sciences] [Google Scholar]
  25. V.N. Kassikhin, M.S. Razumov, A.O. Gladyshkin, N.E. Bykovskaya, Automation of durability calculation for shaft torsion, News of Southwest state university, Equipment and technologies, SWSU, No 2, p. 1, pp. 179–181 (2012) [Google Scholar]
  26. S.G. Emelyanov, M.S. Razumov, S.A. Chevychelov, A.N. Grechukhin, A.O. Gladyshkin, Method of forming profile sections wagons springrailway, Proceedings of the Southwestern State University, Series: Technology 2, 23–28 (2013) [Google Scholar]
  27. A.I. Barbotko, M.S. Razumov, A.O. Gladyshkin, P.A. Ponkratov, O.V. Eskova, O.V. Ovchinkin, Automated system for the implementation of graphic solutions power function, Proceedings of the Southwestern State University 1, 90–94 (2013) [Google Scholar]
  28. Barbot'ko A. and Gladyshkin A. The basis of theory of mathematical modelling: text-book (St. Oskol: “TNT”Ltd, 2009) [Google Scholar]
  29. V. Vorona, I. Shchurov, Working kinematic front angle in turning a sinusoidal linear surface, Russian Engineering Research 5, 469–472 (2012) [Google Scholar]
  30. V. Vorona, S. Chinenov, Rational rear cutter angles for multipassturning of a complex sinusoidal contour surface, Russian Engineering Research 11, 1156–1157 (2011) [Google Scholar]
  31. A. Herberg, Modeling of self-induced vibrations that occur during the machining process of casting patterns with the use of the fuzzy neural networks method, Archives of Metallurgy and Materials 3, 871–875 (2013) [Google Scholar]
  32. S. Wiewiorowska, Analysis of the influence of drawing processparameters on the mechanical properties of trip-structure steelwires. Archives of Metallurgy and Materials 2, 573–578 (2013) [Google Scholar]
  33. Z. Muskalski, Selected problems from the high-carbon steel wire drawing theory and technology, Archives of Metallurgy and Materials 2, 527–535 (2014) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.