| Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
|---|---|---|
| Article Number | 06010 | |
| Number of page(s) | 4 | |
| Section | Other Related Topics | |
| DOI | https://doi.org/10.1051/matecconf/201712906010 | |
| Published online | 07 November 2017 | |
Impact of the liquid level in the jet-film contact devices on the heat-and-mass transfer process
1 Kazan State Power Engineering University, 420066, Kazan, Krasnoselskaya str., 51, Russia
2 Kazan National Research Technological University, 420015, Kazan, Karl Marx str., 68, Russia
* Corresponding Author: ieremiada@gmail.com
For the purpose of increase in efficiency and performance of the heat-and-mass transfer processes, the design of jet-film contact device has been developed. The advantage of this device is a low hydraulic resistance, high mass-transfer efficiency with relatively low energy demands, as well as soiling resistance, efficient operation at low liquid loads. In this article the authors present the research results of heat-transfer from the flowing down liquid film to the gas flow inside of the proposed device. When calculating the Nusselt number, the authors used a correction coefficient, taking into account the impact of the liquid level in the device.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.