Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
---|---|---|
Article Number | 02024 | |
Number of page(s) | 4 | |
Section | Advanced Materials and Coatings | |
DOI | https://doi.org/10.1051/matecconf/201712902024 | |
Published online | 07 November 2017 |
In-situ study of structural evolution of tribological materials using synchrotron radiation
Novosibirsk State Technical University, Materials Science Department, 630073, 20 Karl Marx Ave., Novosibirsk, Russia
* Corresponding author: v.burov@corp.nstu.ru
In this paper, we propose an approach for estimation of structural changes at the surface of metallic materials during running-in stage of friction. The application of synchrotron microbeam for in-situ observation of structural evolution in thin layers subjected to friction load is substantiated. A design of experimental apparatus intended for in-situ studies of friction processes using synchrotron radiation is described. This apparatus maintains constant position of the sample surface with respect to the incident beam. The ring shaped experimental sample with a thickness of 1 mm is pressed with constant pressure against a pin shaped indenter and rotated with constant speed. The pressure on the sample is determined by the mass of the load placed in the loading basket. The surface of the sample that comes out of indenter is probed by synchrotron beam. The proposed experimental scheme allows receiving X-ray diffraction patterns even under condition of severe plastic deformation of the surface. The preliminary results on the synchrotron assisted study of the dry friction of a Cu sample are described.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.