Open Access
| Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
|---|---|---|
| Article Number | 02041 | |
| Number of page(s) | 6 | |
| Section | Advanced Materials and Coatings | |
| DOI | https://doi.org/10.1051/matecconf/201712902041 | |
| Published online | 07 November 2017 | |
- Y.-S. Lee,T.H. Cho,B.K. Lee,J.S. Rho,K.H. An,Y.H. Lee,Surface properties of fluorinated single-walled carbon nanotubes, J. Fluorine Chem., 120 (2003). [Google Scholar]
- G. Socrates, Infrared Characteristic Group Frequencesβrd edition, Chichester N.Y.; Brisbane; Weinheim, Toronto, Brisbane, Singapore: John Wiley & Sons, (2001). [Google Scholar]
- J.-M. Lee,S.J. Kim,J.W. Kim,P.H. Kang,Y.C. Nho,Y.-S. Lee,A high resolution XPS study of sidewall functionalized MWCNTs by fluorination, J. Industr. Engng. Chem., 15, (2009). [Google Scholar]
- I. Crassous,H. Groult,F. Lantelme,D. Devilliers,A. Tressaud,C. Labrugere,M. Dubois et al., Study of the fluorinationof carbon anode in molten KF-2HF by XPS and NMR investigations, J. Fluorine Chem., 130 (2009). [Google Scholar]
- X. Zhang,Q. He,H. Gu,H.A. Colorado,S. Wei,Z. Guo,Flame-etardant Electrical Conductive Nanopolymers Based on Bisphenol F Epoxy Resin Reinforced with Nano Polyanilines, ACS Appl. Mater. Interfaces., V. 5, 898–910 (2013). [CrossRef] [Google Scholar]
- M. Moniruzzaman,F. Du,N. Romero,K.I. Winey,Increased flexural modulus and strength in SWNT/epoxy composites by a new fabrication method, Polymer 47 (2006). [Google Scholar]
- Zhengtao Yang,K. McElrath,J. Bahr,N.A. D’Souza,Effect of matrix glass transition on reinforcement efficiency of epoxy-matrix composites with single walled carbon nanotubes, multi-walled carbon nanotubes, carbon nanofibers and graphite, Composites: Part B. 43 (2012). [Google Scholar]
- R. Chaos-Moran,A. Salazar,A. Urena,Mechanical Analysis of Carbon Nanofiber/Epoxy Resin Composites Polymer Comp. (2011) 32,. [Google Scholar]
- Y. Zhou,F. Pervin,S. Jeelani, et al., Improvement in mechanical properties of carbon fabric-epoxy composite using carbon nanofibers, J. Mater. Processing Technol. 198 (2008). [Google Scholar]
- Schulte. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites - A comparative study, Comp. Sci. Techn. 65 (2005). [Google Scholar]
- L.Q. Liu,H.D. Wagner,Rubbery and glassy epoxy resins reinforced with carbon nanotubes, Comp. Sci. Techn. 65 (2005). [Google Scholar]
- G.S. Baronin,D.V. Pugachev,D.E. Kobzev,P.V. Kombarova,Investigation of strength properties and impact viscosity of ceramic polymeric composites based on abs-copolymer and uhmwpe, liquid and solid-phase extrusion,Bulletin of TSTU 17(2011). [Google Scholar]
- R.G. de Villoria,A. Miravete,J. Cuartero,A. Chiminelli,N. Tolosana,Mechanical properties of SWNT/epoxy composites using two different curing cycles, Composites Part B: Engng. 37 (2006). [Google Scholar]
- Z. Wanga,H.A. Colorado,Z.-H. Guo,H. Kim,C.-L. Park,H. T. Hahna,S.-G. Lee,K.-H. Lee,Y.-Q. Shang,Effective Functionalization of Carbon Nanotubes for Bisphenol F Epoxy Matrix Composites, Materials Research. 15 (2012). [Google Scholar]
- D.H. Wang,S. Sihn,A.K. Roy,J.-B. Baek,L.-S. Tan,Nanocomposites based on vapor-grown carbon nanofibers and an epoxy: Functionalization, preparation and characterization, Europen Polymer J. 46 (2010). [Google Scholar]
- Y. Zhou,F. Pervin,L. Lewis,S. Jeelani,Experimental study on the thermal and mechanical properties of multiwalled carbon annotube-reinforced epoxy, Materials Sci. Engng. 452 (2007). [Google Scholar]
- M. Theodore,M. Hosur,J. Thomas,S. Jeelani, Characterization of epon 862 reinforced withfunctionalized MCNT's//http://www.iccmcentral.org/Proceedings/ICCM16proceedings/ contents/pdf/MonA /MoAA2-01sp_theodorem222779p.pdf. [Google Scholar]
- I.V. Anosova,M.O. Telegin,Development of technology of modification of cnt series “Taunit” by polyaniline Problems of technogenic security and sustainable development: Sat. sci. art. young scientists, graduate students and students,TSTU, 4 (2013). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.