Open Access
| Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
|---|---|---|
| Article Number | 01061 | |
| Number of page(s) | 4 | |
| Section | Modern Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201712901061 | |
| Published online | 07 November 2017 | |
- S. Zivkovic., L. Takic, N. Zivkovic, The improvement of environmental performances by applying ISO 14001 standard – A case study, Chemical Industry and Chemical Engineering Quarterly. vol. 19, No 4,pp.541–552.(2013)doi: 10.2298/CICEQ 120513088Z [CrossRef] [Google Scholar]
- A.R. Maslov, Konstruirovanie instrumentai'noi osnastki [Construction tooling] (Moscow, Yanus-K Publ., 2012) ISBN 978-5-8037-0557-4 [Google Scholar]
- V.A. Grechislmikov, S.N. Grigor'ev, S.V. Lukina, Ju.M. Solomencev, A.G. Shirtladze, V.I. Vlasov, Processy i oi operacii formoobrazovanija i instrumental'naja tehnika (Moscow: Janus-K Publ. 280 p., 2006) ISBN 5-8037-0296-X [Google Scholar]
- A.A. Bekaev, Y.V. Maksimov, S.V. Lukina, Predicting the surface quality in discontinuous cutting, Russian Engineering Research. No 35(10), pp.792(2015) [CrossRef] [EDP Sciences] [Google Scholar]
- S.V. Lukina, M.V. Krutyakova Sovrernennye problemy organizatsii i uprarleniya instrumental'nym obespecheniem mashinostroitel'nykh proizrodstv [Modern problems of organization and management of tool maintenance machine industry] (Moscow, MGTU «MAMI» Publ. 116 p.,2013) [Google Scholar]
- S.V. Lukina, Metodika optimizacii proizvodstvennoj dejatel'nosti promyshlennogo predprijatija na osnove kompleksa prognosticheskih reshenij v oblasti vysokotehnoiogichnyh proizrodstv [The technique of optimizing of the production activity of industrial plant on the basis of a complex of predictive models of formation and selection of design innovative solutions in the field of hightech industries], Vestnik MSTU «STANKIN», No 1(32), pp. 125–129(2015) [Google Scholar]
- S.V. Lukina, Povyshenie effektivnosti proektirovaniya sbornogo rezhushchego instrumenta na baze ustanovlennykh vzaimosvyazei konstruktorsko-tekhnologicheskikh i ekonomicheskikh reshenii. Diss, clokt. teklm. nauk [Improving the efficiency of the design of the cutting tool on the basis of established relationships design and technological and economic decisions. Dr. eng. sci. diss.] (Moscow, 1999) [Google Scholar]
- A.S. Yanyushkin, D.V. Lobanov, D.A. Rychkov, Automation of technological preparation of production at selection of cutting tools, J. World of engineering and technology, No 6. p. 36–38. (2013) [Google Scholar]
- S.V. Lukina, Modelirovanie protsedur formiroraniya i vybora strukturnykh komponovok sbornykh rezhushchikh instrumentov na osnove setevykh graf-modelei [Modeling procedures for formation and choice of structural component layout of modular cutting tools using network graph-models], Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science, No 2, pp. 28–30 (2009) [Google Scholar]
- S.V. Lukina, ponovok sbornykh rezhushchikh instrumentov na etape tekhnicheskoi podgotovki proizvodstva [Automating procedures for formation and choice of structural component layout of modular cutting tools in step of technical preparation production],Vestnik Saratovskogo gosudarstvennogo tekhnicheskogo universiteta - Vestnik Saratov State Technical University, vol.3, No 1, pp. 241–247 (2011) [Google Scholar]
- S.V. Lukina, Modelinig of stresses-deformed state of inserted cutting tools during their production and operation, Avtomatizatsiya i Sovremennye Tekhnologii, No 4, pp. 24(2001) [Google Scholar]
- V.A. Grechishnikov, S.V. Lukina, A.I. Veselov, D.V. Makarov, The forming processes modeling for geometric parameters of inserted cutting tools with regard to their assembly technology, Avtomatizatsiya i Sovremennye Tekhnologii, No 4, pp.32(2001) [Google Scholar]
- S.V. Lukin, Otsenka konkurentosposobnosti sbornykh metal1orezhushchikh instrumentov na etape ikh proektirovaniya i vybora [Estimation of competitiveness of modular metal-cutting tools at a stage of their designing and a choice], Sborka v mashinostroeni, priborostroenii – Assembling in mechanical engineering and instrument-making, No9. pp. 3–8(2011) [Google Scholar]
- S.V. Lukina, Formation of the system of the local indicators to assess the quality of the cutting tool at the stage of technical training of production, Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty)– Metal Working and Material Science, No 4(69), p.43–50(2015)doi: 10.17212/1994-6309-2015-4-43-50 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.