| Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
|---|---|---|
| Article Number | 01008 | |
| Number of page(s) | 5 | |
| Section | Modern Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201712901008 | |
| Published online | 07 November 2017 | |
Design optimization of heating plates for hydraulic presses
Tambov State Technical University, 392000, Sovetskaya, 106, Tambov, Russia
* Corresponding author: mokr@mail.gaps.tstu.ru
The paper describes the problem of design optimization of heating plates for hydraulic presses used for heat treatment of rubber, plastics, and metals. The problem involves finding the number and capacity of heaters or the heating steam pressure, the appropriate configuration of slots for heaters or steam supply channels to ensure the required heating rate of the plate to the operating temperature, and the permissible level of non-uniformity of the temperature field of its working surface. The adequacy of the mathematical description of the thermal process in heating plates for presses is confirmed by comparing the results of the solution of mathematical models with the data of the industrial experiments. The results of solving the problem for induction heating plates and resistive heating plates are presented.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.