MATEC Web Conf.
Volume 129, 2017International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|Number of page(s)||7|
|Section||Modern Manufacturing Technologies, Tools and Equipment|
|Published online||07 November 2017|
Improvement of quality of details at round grinding in the conditions of a floating workshop
Sevastopol State University, Sevastopol, Russian Federation
* Corresponding author: firstname.lastname@example.org
The results of laboratory studies of the grinding processing process are given taking into account the evaluation of the quality of the surfaces of the shafts with disturbing vibrational influences on the equipment of external forces that are the consequence of sea waves, as well as the neighboring operating equipment in a floating workshop. To determine the influence of external influences on the quality of processing during grinding, an experimental stand was used, including a cylindrical grinding machine with a complex of test equipment, as well as a compressor placed at a different distance from the machine, creating external vibration effects simulating external disturbances through the surface Floor and foundation on the machine bed, corresponding to the effects of the external environment and the operating neighboring equipment. The dependences of the frequency of mechanical oscillations (in the measuring zones-the base-bed and the machine table guides in the transverse and vertical directions) are obtained, the amplitude of the vibro-displacement in these zones from the conditions of the circular grinding machine and sea-wave levels. The changes in the error in the shape of the machined parts, the roughness of the machined surface, the waviness of the roll neck surfaces according to the basic and achieved variants are determined taking into account the use of new designs of effective vibration isolating supports and devices.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.