Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
---|---|---|
Article Number | 01020 | |
Number of page(s) | 4 | |
Section | Modern Manufacturing Technologies, Tools and Equipment | |
DOI | https://doi.org/10.1051/matecconf/201712901020 | |
Published online | 07 November 2017 |
Influence of technological factors of blade processing on the forming of the defect layer
“Technology of Machinery” Department, Volgograd State Technical University, 28, Lenin's av., Volgograd, Russia, 400005
* Corresponding author: Julio-Tchigirinsky@yandex.ru
Identified the interrelationships between the depth of the surface layer with modified physical-mechanical properties (defective or work-hardened or fill hard layer), the parameters of cutting process, and the properties of materials of tool and workpiece. Justified the necessity of research the processes of formation the properties of the machined surface from the standpoint of the thermo-physics of the cutting process
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.