Issue |
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|
|
---|---|---|
Article Number | 05008 | |
Number of page(s) | 5 | |
Section | Civil Engineering and Architecture | |
DOI | https://doi.org/10.1051/matecconf/201712905008 | |
Published online | 07 November 2017 |
Calculation of a three-layer plate by the finite element method taking into account the creep of the filler
Don State Technical University, 344022 Sotsialisticheskaya 162, Russia
* Corresponding author: anton_chepurnenk@mail.ru
In the article the derivation of the resolving equations for the calculation of a three-layer plate taking into account the creep of the middle layer by the finite element method is given. Rectangular finite elements are used. The problem reduces to a system of linear algebraic equations. An example of calculating a three-layer plate hinged on the contour and loaded with a uniformly distributed load is considered. A comparison of the results with the solution based on the finite difference method is presented.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.