MATEC Web Conf.
Volume 129, 2017International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|Number of page(s)||4|
|Section||Modern Manufacturing Technologies, Tools and Equipment|
|Published online||07 November 2017|
Direct formation of surface layer’s quality parameters during combined treatment of two-phase stainless steel blanks
Ulyanovsk State Technical University, 432027 Ulyanovsk, Russia
2 Ulyanovsk Mechanical Plant, 432008 Ulyanovsk, Russia
* Corresponding author: firstname.lastname@example.org
The results of experimental studies of formation surface layer’s quality parameters (residual stresses and phase composition) forming during combined turning and ultrasonic hardmetal burnishing of blanks made of 07X16H6 two-phase stainless steel are represented. Shows the effect of combined treatment regime on the value and depth of the arising compressive residual stresses and phase composition (volume of austenite). Also demonstrated that the changes in this parameters are distributed to a depth exteeding the allowance for subsequent processing.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.