Open Access
MATEC Web Conf.
Volume 129, 2017
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
Article Number 01068
Number of page(s) 5
Section Modern Manufacturing Technologies, Tools and Equipment
Published online 07 November 2017
  1. Cutting fluids for metal cutting. Practical recommendation / Guide, (M: NIImash, 1979) [Google Scholar]
  2. D. U. Abdulgazis, Use of De-Hydration Endothermic Effect of Crystalline Hydrates to Increase a Heat-Removing Capacity of CLS on the basis of Vegetable Oils, High technologies in mechanical engineering, Collected Works NTU “KhPI”, Issue 2(11), P. 3–8 (2013) [Google Scholar]
  3. D.U. Abdulgazis, E.R. Ablayev, On the possibility of decreasing drilling temperatures by using cutting fluids with endothermic properties, Bulletin of Crimea Engineering and Pedagogical University, issue 20, pp. 30–34 (2009) [Google Scholar]
  4. D.U. Abdulgazis, On methods of creating compositional vegetable oil-and crystalline hydrates-based cutting fluids, Bulletin NTU KPI. Machinery manufacturing No. 46, pp. 109–110 (2005) [Google Scholar]
  5. D.U. Abdulgazis,E.D. Umerov, Bench and wheel tests of effectiveness of endothermic oil-based cutting fluids, Bulletin of Crimea Engineering and Pedagogical University, issue 29, pp. 62–67 (2011) [Google Scholar]
  6. W.A. Harrison, Electronic Structure and the Properties of Solids: The Physics of the Chemical Bond. – Vol. 1 (translated into Russian) (M.: Mir, 1983) [Google Scholar]
  7. The Mechanism of Action of Friction Modifier - Molybdenum Disulphide [Digital Resource]. Access mode: [Google Scholar]
  8. V.P. Zarubin, Development and research of tribotechnical properties of lubricants with powdered friction geomodifiers as fillers: abstract of Candidate of Sciences (PhD) thesis (Ivanovo, 2007) [Google Scholar]
  9. Structural Froms and Mobility of Molecular Water in Montmorillonite [Digital Resource]. Access mode: [Google Scholar]
  10. V.V. Goryushkin, Technological Properties of Paleocene Bentonites of the Voronezh Anteclise and Opportunity of its Use, Bulleting of Voronezh University. Geology, No. 1, P. 166–177(2005) [EDP Sciences] [Google Scholar]
  11. V.G. Solonenko, Enhancement of Cutting Tools Working Capacity (Krasnodar, Rostov-on-Don: Kuban State Technological University, North Caucasian Department of the Academy of the Quality Problems in the Russian Federation, 1997) [Google Scholar]
  12. V.G. Solonenko, M.G. Serikova, L.A. Solonenko, Working Capacity of Auger Drills (Krasnodar: Kuban State Technological University, 2004) [Google Scholar]
  13. P.I. Yashcheritsin, Ye.E. Feldshtein, M.A. Kornevich, Theory of Cutting: Manual (Minsk: Novoe Znanie, 2006) [Google Scholar]
  14. E.D. Umerov, D.U. Abdulgazis, U.A. Abdulgazis, Increase of hardness of a cutting tool via using environmentally friendly additives to oil-based cutting fields with endothermic and tribotechnological properties, Technical regulations in Eurasian Economic Space: collection of materials of All-Russian Conference with international participants. Yekaterinburg, pp. 24–31 (2015) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.