MATEC Web Conf.
Volume 129, 2017International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017)
|Number of page(s)||4|
|Section||Modern Manufacturing Technologies, Tools and Equipment|
|Published online||07 November 2017|
Scanning the welded seams of titanium alloys by using subminiature eddy current transducers
Altai State University, Faculty physics and technology, 65604, Barnaul, Russia
* Corresponding author: firstname.lastname@example.org
The eddy current transducer (ECT) of the transformer type is used to construct a sensor for investigating titanium sheets joined by a welded joint. The characteristics of the ECT are presented. The measurement method for controlling the occurrence of defects in the welded joints in titanium alloys is described. The experimental results obtained by the ECT on two welded titanium sheets are presented. The depth of penetration of the field of eddy currents into the investigated object is determined and the dependences describing the response of the ECT at different depths of the defect are outlined. The relationships can be used for evaluating the quality of welded joints and determining the reliability of welding.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.