Free Access to the whole issue

Open Access

Statement of Peer review

Published online: 02 December 2019

• PDF (163 KB)

About the conference

Plenary

Open Access

Multiaxial and non-proportional microstructure-sensitive fatigue crack nucleation 01001

Bo Chen, Koenraad Janssens and Fionn Dunne

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930001001

• Abstract
• PDF (1019 KB)
• References

Open Access

Observations and modelling of non-proportional mixed mode cyclic loading 01002

Michael Vormwald

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930001002

• Abstract
• PDF (352.5 KB)
• References

Open Access

Multiaxial Fatigue of Additive Manufactured Metals 01003

Ali Fatemi, Reza Molaei and Nam Phan

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930001003

• Abstract
• PDF (1004 KB)
• References

Keynote

Open Access

Approaches to fatigue life prediction under multiaxial loading 02001

David Nowell and João Vitor Sahadi Cavalheiro

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930002001

• Abstract
• PDF (1.188 MB)
• References

Open Access

Multiaxial High Cycle Fretting Fatigue 02002

José Alexander Araújo, Gabriel Magalhães Juvenal Almeida, Fábio Comes Castro and Raphael Araújo Cardoso

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930002002

• Abstract
• PDF (966.0 KB)
• References

Open Access

Fatigue equivalent load approach for fatigue design 02003

Ida Raoult and Benoit Delattre

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930002003

• Abstract
• PDF (307.7 KB)
• References

Additive Manufacturing

Open Access

Computational simulation of fracture behaviour in auxetic cellular structure by multiaxial loading 03001

Branko Nečemer, Janez Kramberger, Nejc Novak and Srečko Glodež

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930003001

• Abstract
• PDF (1.098 MB)
• References

Open Access

Fatigue of thin periodic triangular lattice plates 03002

Yifan Li, Anton Shterenlikht, Martyn Pavier and Harry Coules

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930003002

• Abstract
• PDF (975.2 KB)
• References

Open Access

Mechanical response of a Laser Cladding repaired structure: localization of plastic strain due to microstructure gradient 03003

Camille Guévenoux, Simon Hallais, Alexandre Charles, Eric Charkaluk and Andrei Constantinescu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930003003

• Abstract
• PDF (788.0 KB)
• References

Open Access

Multi-axial fatigue behaviour of titanium periodic cellular structures produced by Selective Laser Melting (SLM) 03004

Khalil Refai, Charles Brugger, Marco Montemurro and Nicolas Saintier

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930003004

• Abstract
• PDF (332.3 KB)
• References

Open Access

Multiaxial fatigue strength under non-proportional loading of additively manufactured notched components of Ti-6Al-4V 03005

Stefano Bressan, Nima Razavi, Fumio Ogawa, Takamoto Itoh and Filippo Berto

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930003005

• Abstract
• PDF (825.4 KB)
• References

Open Access

Defect sensitivity in additively manufactured aluminium alloys: contribution of CAD artificial defects 03006

Matthieu Bonneric, Charles Brugger and Nicolas Saintier

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930003006

• Abstract
• PDF (286.0 KB)
• References

Application

Open Access

Fracture and determination of a lifetime of in-service mechanical components with porosity cluster in an aluminium alloy 04001

Julien Vasseur, Dmytro Vasiukov, Salim Chaki, Isabel Huther, Michel Marzin, Fabien Lefebvre, Benoît Dupont and Nicolas Leymarie

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930004001

• Abstract
• PDF (821.4 KB)
• References

Open Access

Bolt fatigue parametric study of a bolted assembly 04002

Aliou Badara Camara, Fabienne Pennec, Sébastien Durif, Jean-Louis Robert and Abdelhamid Bouchaïr

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930004002

• Abstract
• PDF (1.076 MB)
• References

Open Access

Multiaxial fatigue criteria applied to motor crankshaft in thermoelectric power plants 04003

Marcos Venicius S. Pereira, Fathi Aref Darwish, André Feiferis and Tiago Lima Castro

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930004003

• Abstract
• PDF (709.9 KB)
• References

Open Access

Drillstring Failure: Analytical and Experimental Approach 04004

Edris Hassan, Jamil Abdo, Jan Kwak and Abdullah Al Shabibi

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930004004

• Abstract
• PDF (1.030 MB)
• References

Composite Materials

Open Access

Multiaxial Fatigue Behavior of High-Density Polyethylene (HDPE) Including Notch Effect: Experiments and Modeling 05001

Mohammadreza Amjadi and Ali Fatemi

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930005001

• Abstract
• PDF (1.083 MB)
• References

Open Access

Blind prediction of FRP repairs for multiaxial fatigue cracks on Hydraulic Steel Structures 05002

Guillermo Alberto Riveros and Christine Michelle Lozano

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930005002

• Abstract
• PDF (822.6 KB)
• References

Contact and Fretting Fatigue

Open Access

Investigation of the asperity point load mechanism for thermal elastohydrodynamic conditions 06001

Carl-Magnus Everitt and Bo Alfredsson

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930006001

• Abstract
• PDF (1.240 MB)
• References

Open Access

Determination of optimal residual stress profiles for improved rolling contact fatigue resistance 06002

Hamidreza Mahdavi, Konstantinos Poulios and Christian F. Niordson

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930006002

• Abstract
• PDF (884.5 KB)
• References

Open Access

Fatigue strength evaluation for individual strands of overhead conductors using a biaxial fretting fatigue test bench 06003

Amine Omrani, Sébastien Langlois, Pierre Van Dyke, Sasan Sattarpanah Karganroudi and Sébastien Lalonde

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930006003

• Abstract
• PDF (1.047 MB)
• References

High Temperature

Open Access

High temperature bi-axial low cycle fatigue behaviour of railway wheel steel 07001

Dimitrios Nikas and Johan Ahlström

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930007001

• Abstract
• PDF (228.0 KB)
• References

Open Access

Evaluation of Multiaxial Creep-fatigue Strength for High Chromium Steel under Non-proportional Loading 07002

Yuuki Kasamuta, Fumio Ogawa, Takamoto Itoh and Hiroyasu Tanigawa

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930007002

• Abstract
• PDF (580.6 KB)
• References

Open Access

Creep Damage Evaluation using Uniaxial Miniature Specimens for Multiaxially Damaged Components 07003

Rui Kosaka, Fumio Ogawa, Takamoto Itoh and Masao Sakane

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930007003

• Abstract
• PDF (686.9 KB)
• References

Open Access

Thermal Gradient Mechanical Fatigue Assessment of a Nickel-Based Superalloy 07004

Huang Yuan and Jingyu Sun

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930007004

• Abstract
• PDF (964.5 KB)
• References

LCF or Cyclic Behaviour

Open Access

Low-cycle fatigue behaviour of an aero-engine disk alloy under non-proportional loading 08001

João Vitor Sahadi Cavalheiro and David Nowell

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930008001

• Abstract
• PDF (683.3 KB)
• References

Open Access

Cyclic Deformation and Low-Cycle Fatigue for 316LN Stainless Steel under Non-proportional Loading 08002

Yajing Li, Bin Ren and Xu Chen

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930008002

• Abstract
• PDF (1.046 MB)
• References

Open Access

New research findings on non-proportional low cycle fatigue 08003

Anghel Cernescu and Rhys Pullin

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930008003

• Abstract
• PDF (810.7 KB)
• References

Open Access

Retracted Article: Axial-torsional fatigue and cyclic deformation of 304L stainless steel at room temperature 08004

Cainã Bemfica, Edgar Mamiya and Fábio Castro

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930008004

• Abstract
• PDF (1.462 MB)
• References

Open Access

On the phase angle role in the shear response of ZK60 Mg alloys under multiaxial fatigue 08005

Seyyed Mohamad Hasan Karparvarfard, Seyed Behzad Behravesh, Sugrib Kumar Shaha and Hamid Jahed

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930008005

• Abstract
• PDF (935.8 KB)
• References

Open Access

A cloud-based fatigue analysis tool with interactive Neuber’s master curve 08006

Daniel Kujawski

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930008006

• Abstract
• PDF (817.8 KB)
• References

Open Access

Influence of multiaxial cyclic plastic loading on grain boundary misorientation profile in austenitic stainless steel 08007

Rima Dey, Soumitra Tarafder and S Sivaprasad

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930008007

• Abstract
• PDF (865.2 KB)
• References

Open Access

Regularizational approach for modeling ductile damage 08008

Kai Langenfeld, Kerstin Möhring, Frank Walther and Jörn Mosler

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930008008

• Abstract
• PDF (447.9 KB)
• References

Open Access

Configurational forces in cyclic metal plasticity 08009

Aris Tsakmakis and Michael Vormwald

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930008009

• Abstract
• PDF (382.9 KB)
• References

Open Access

Multiaxial Inverse Stress Analysis for Indentation Creep 08010

Masao Sakane, Akihiko Hirano, Naomi Hamada, Yukari Hoya, Takahiro Oka, Masataka Furukawa and Takamoto Itoh

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930008010

• Abstract
• PDF (783.3 KB)
• References

Open Access

Retraction Note: Axial-torsional fatigue and cyclic deformation of 304L stainless steel at room temperature 08011

Cainã Bemfica, Edgar Mamiya and Fábio Castro

Published online: 07 March 2022

DOI: https://doi.org/10.1051/matecconf/201930008011

• Abstract
• PDF (47.12 KB)

Life Assessment

Open Access

Influence of internal imperfections on the fatigue resistance of cast steel – testing methodology 09001

Sven Nagel, Christof Rauber, Ines Veile, Peter Knödel and Thomas Ummenhofer

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930009001

• Abstract
• PDF (899.5 KB)
• References

Open Access

A railway wheel evaluation under multiaxial loading conditions 09002

Henrique Soares, Vitor Anes, Manuel Freitas and Luis Reis

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930009002

• Abstract
• PDF (878.6 KB)
• References

Open Access

Multiaxial fatigue behavior of 2618 aluminum alloy 09003

Benaïssa Malek, Catherine Mabru and Michel Chaussumier

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930009003

• Abstract
• PDF (1.082 MB)
• References

Open Access

Fatigue Life Properties of Stainless Steels in Wide Ranged Biaxial Stress States using a Hollow Cylinder Specimen 09004

Shunsuke Saito, Fumio Ogawa and Takamoto Itoh

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930009004

• Abstract
• PDF (905.0 KB)
• References

Microstructure Simulation

Open Access

Computational and experimental study of crack initiation in statistical volume elements 10001

Ebiakpo Kakandar, Gustavo M. Castelluccio, Alejandro Barrios, Olivier Pierron and Xavier Maeder

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930010001

• Abstract
• PDF (643.1 KB)
• References

Open Access

Influence of hard and soft inclusions inside a ferritic matrix 10002

Riccardo Fincato, Seiichiro Tsutsumi, Tatsuo Sakai and Kenjiro Terada

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930010002

• Abstract
• PDF (1.291 MB)
• References

Mixed-Mode

Open Access

Life-time prediction for aviation GTE compressor disk based on mixed-mode and multi-axial fracture resistance parameters 11001

Valery Shlyannikov, Ivan Ishtyryakov and Rustam Yarullin

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930011001

• Abstract
• PDF (834.7 KB)
• References

Open Access

A three-dimensional elastoplastic analysis of mixed-mode K_I/K_II around the crack front 11002

Luiz Fernando Nazaré Marques, Jaime Tupiassú Pinho de Castro, Luiz Fernando Martha and Marco Antonio Meggiolaro

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930011002

• Abstract
• PDF (1.555 MB)
• References

Open Access

Mixed mode I/II/III fracture assessment of PMMA using a new test fixture 11003

Nima Razavi, Haakon Lie Hokstad and Filippo Berto

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930011003

• Abstract
• PDF (680.9 KB)
• References

Open Access

Mixed-mode crack tip fields in a polycrystalline aluminum alloy 11004

Marcel Wicke and Angelika Brueckner-Foit

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930011004

• Abstract
• PDF (1.114 MB)
• References

Open Access

Residual strength evaluation under mixed mode loading 11005

Slobodanka Boljanović, Stevan Maksimović and Andrea Carpinteri

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930011005

• Abstract
• PDF (319.1 KB)
• References

Open Access

Investigation of mixed mode fatigue crack propagation in SEN-specimen under in-phase and out-of-phase conditions due to tension-compression and torsional loading 11006

Paul Koester, Christopher Benz and Manuela Sander

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930011006

• Abstract
• PDF (765.8 KB)
• References

Open Access

Effect of triaxial stress distribution upon roughness of brittle fracture surface 11007

Noritaka Nakamura, Tomoya Kawabata, Yasuhito Takashima, Yuki Nishizono and Fuminori Yanagimoto

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930011007

• Abstract
• PDF (953.6 KB)
• References

Open Access

Cruciform specimens for the determination of crack growth behaviour in biaxial stress fields: calculation of K-factors 11008

Carl H. Wolf, Andreas Burgold, Sebastian Henkel, Meinhard Kuna and Horst Biermann

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930011008

• Abstract
• PDF (995.1 KB)
• References

Open Access

An dissipated energy based analysis of fatigue crack propagation law 11009

Aleksei Vshivkov, Anastasiia Iziumova, Rustam Yarullin, Valery Shlyannikov and Oleg Plekhov

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930011009

• Abstract
• PDF (485.1 KB)
• References

Non-Proportional Loading

Open Access

Fatigue behavior of Nitinol medical devices under multi-axial non-proportional loads 12001

Francesca Berti, Pei-Jiang Wang, Andrea Spagnoli, Carlo Guala, Francesco Migliavacca, Giancarlo Pennati, Elazer R Edelman and Lorenza Petrini

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930012001

• Abstract
• PDF (831.6 KB)
• References

Open Access

Effect of phase angle on the cyclic behavior of AISI 410 alloy 12002

Muhammed J. Adinoyi, Nesar Merah and Jafar Albinmousa

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930012002

• Abstract
• PDF (1.693 MB)
• References

Open Access

Taking into account the non-proportional loading effect on high cycle fatigue life predictions obtained by invariant-based approaches 12003

Lorenzo Bercelli, Cédric Doudard and Sylvain Moyne

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930012003

• Abstract
• PDF (1.041 MB)
• References

Open Access

Evaluation of Non-proportional Multiaxial Fatigue Strength of Lead-free Solder with Elements Addition 12004

Keiwa Makino, Fumio Ogawa and Takamoto Itoh

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930012004

• Abstract
• PDF (675.2 KB)
• References

Open Access

Multiaxial high-cycle fatigue modelling for random loading 12005

Haoyang Wei, Jie Chen, Patricio Carrion, Anahita Imanian, Nima Shamsaei, Nagaraja Iyyer and Yongming Liu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930012005

• Abstract
• PDF (481.1 KB)
• References

Notch

Open Access

Generalization of the theory of critical distance to estimate lifetime of notched components in the medium-cycle fatigue regime 13001

Rafael Borges, José Araújo, Cosme Silva, Jéssica Dias and Jorge Ferreira

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930013001

• Abstract
• PDF (942.0 KB)
• References

Open Access

Characterising Fatigue Behaviour of Nodular Cast Iron Using Micromechanical Simulations 13002

Mehul Lukhi, Meinhard Kuna and Geralf Hütter

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930013002

• Abstract
• PDF (329.4 KB)
• References

Open Access

The contrast of simplicity and accuracy in modeling multiaxial notch fatigue 13003

Christian Riess, Martin Obermayr and Michael Vormwald

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930013003

• Abstract
• PDF (254.4 KB)
• References

Open Access

The elasto-plastic Point Method to estimate fatigue lifetime of notched metallic materials under variable amplitude multiaxial fatigue loading 13004

Namiq Zuhair Faruq and Luca Susmel

Published online: 09 December 2019

DOI: https://doi.org/10.1051/matecconf/201930013004

• Abstract
• PDF (1.282 MB)
• References

Recent Development in Experimental Techniques

Open Access

Development of Multiaxial Creep Testing Machine for Miniature Specimen 14001

Noritake Hiyoshi, Takamoto Itoh, Masao Sakane, Takafumi Tsurui and Masaaki Tsurui

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930014001

• Abstract
• PDF (683.8 KB)
• References

Open Access

Development of Fatigue Testing System for in-situ Observation by AFM & SEM 14002

Amir Farokh Payam, Oliver Payton, Mahmoud Mostafavi, Loren Picco, Stacy Moore, Tomas Martin, A.D. Warren and David Knowles

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930014002

• Abstract
• PDF (367.1 KB)
• References

Special Session in Memoria of Prof. Ewald Macha

Open Access

The generalized criterion of multiaxial random fatigue based on conception proposed by prof. Macha 15001

Tadeusz Łagoda, Marta Kurek and Karolina Łagoda

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930015001

• Abstract
• PDF (1.058 MB)
• References

Open Access

Short cracks observations on surfaces of specimens made of three materials, subjected to synchronous and asynchronous multiaxial loadings 15002

Łukasz Pejkowski, Jan Seyda and Dariusz Skibicki

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930015002

• Abstract
• PDF (2.060 MB)
• References

Open Access

Crack shielding in non-planar and frictional discontinuities under mixed-mode loading 15003

Andrea Spagnoli, Andrea Carpinteri and Michele Terzano

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930015003

• Abstract
• PDF (837.6 KB)
• References

Open Access

Mean stress effects on Low-Cycle Fatigue behaviour of Inconel 718 alloy 15004

Sabrina Vantadori, Andrea Carpinteri, Camilla Ronchei, Daniela Scorza and Andrea Zanichelli

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930015004

• Abstract
• PDF (560.3 KB)
• References

Open Access

Including the normal to shear stresses ratio in fatigue life estimation for cyclic loadings 15005

Marta Kurek

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930015005

• Abstract
• PDF (367.2 KB)
• References

Open Access

Fatigue behaviour of selected materials under multiaxial asynchronous loadings 15006

Łukasz Pejkowski, Dariusz Skibicki and Jan Seyda

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930015006

• Abstract
• PDF (994.5 KB)
• References

Open Access

General Procedure for Formulation of Multiaxial Fatigue Failure Criteria in Frequency Domain 15007

Adam Niesłony, Michał Böhm and Robert Owsiński

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930015007

• Abstract
• PDF (507.5 KB)
• References

Strength Criteria

Open Access

Evaluation of fatigue strength criteria for thick-walled nodular cast iron components from EN-GJS-400 under multiaxial load 16001

Markus Fass, Klaus Störzel and Jörg Baumgartner

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930016001

• Abstract
• PDF (787.7 KB)
• References

Open Access

The assessment of the tensile with torsion loading interaction using the selected hypotheses and the experiment 16002

Vladimír Chmelko and Pavol Novotný

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930016002

• Abstract
• PDF (859.8 KB)
• References

Open Access

An efficient procedure to speed up critical plane search in multiaxial fatigue: Application to the Carpinteri-Spagnoli spectral criterion 16003

Denis Benasciutti and Julian Marcell Enzveiler Marques

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930016003

• Abstract
• PDF (1.435 MB)
• References

Open Access

The effect of mean axial and torsional stresses on the fatigue strength of 34CrNiMo6 high strength steel 16004

Luis Pallarés-Santasmartas, Joseba Albizuri, Nelson Leguinagoicoa, Nicolas Saintier and Jonathan Merzeau

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930016004

• Abstract
• PDF (778.6 KB)
• References

Open Access

The use of a modified critical plane model to assess multiaxial fatigue of steels with nonmetallic inclusions 16005

Pedro Vinícius Sousa Machado, Lucas Carneiro Araújo, Marcos Venicius Soares and José Alexander Araújo

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930016005

• Abstract
• PDF (924.5 KB)
• References

Open Access

Determination of critical plane and assessment of fatigue durability for multiaxial cyclic loading and arbitrary shift of phases 16006

Boris A. Stratula, Nikolai G. Burago, Alexander D. Nikitin and Ilia S. Nikitin

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930016006

• Abstract
• PDF (667.4 KB)
• References

Open Access

Interaction Between Normal and Shear Stresses and Its Effect on Multiaxial Fatigue Behavior 16007

Shahriar Sharifimehr and Ali Fatemi

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930016007

• Abstract
• PDF (878.1 KB)
• References

Open Access

A continuum based macroscopic unified low-and high cycle fatigue model 16008

Tero Frondelius, Sami Holopainen, Reijo Kouhia, Niels Saabye Ottosen, Matti Ristinmaa and Joona Vaara

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930016008

• Abstract
• PDF (171.2 KB)
• References

Open Access

Mean shear stress effect built into the multiaxial fatigue strength estimation method of an integral type 16010

Jan Papuga, Lukáš Suchý and Milan Růžička

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930016010

• Abstract
• PDF (508.1 KB)
• References

Variable Amplitude Loading

Open Access

Influence of Material Ductility on Fatigue Life under Multiaxial Proportional and Non-Proportional Normal and Shear Stresses 17001

Cetin Morris Sonsino

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930017001

• Abstract
• PDF (1.105 MB)
• References

Open Access

A fast algorithm to racetrack filter multiaxial histories preserving load shape 17002

Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro and Hao Wu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930017002

• Abstract
• PDF (485.2 KB)
• References

Open Access

Multiaxial cycle counting method for non-proportional multiaxial variable loading signals based on modified maximal shear stress 17003

Matus Margetin and Dominik Biro

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930017003

• Abstract
• PDF (720.8 KB)
• References

Open Access

A universal, damage-criterion-independent cycle counting method for multiaxial and variable amplitude fatigue 17004

K.G. F. Janssens

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930017004

• Abstract
• PDF (1.227 MB)
• References

Open Access

Establishment of damage estimation rule for brittle fracture after cyclic plastic prestrain in steel 17005

Hiroaki Kosuge, Tomoya Kawabata, Taira Okita, Hideaki Murayama and Shunsuke Takagi

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930017005

• Abstract
• PDF (478.2 KB)
• References

Open Access

Fatigue strength of S355JC steel under harmonic and random bending-torsion loading by a tri-axis shaker: Preliminary experimental results 17006

Davide Zanellati, Denis Benasciutti and Roberto Tovo

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930017006

• Abstract
• PDF (838.7 KB)
• References

Very High Cycle Fatigue

Open Access

Crack growth and microstructural changes in AISI 52100: white etching cracks (WEC) and fine granular area (FGA) 18001

Stefan Averbeck, Daniel Spriestersbach and Eberhard Kerscher

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930018001

• Abstract
• PDF (1.130 MB)
• References

Open Access

Fretting Fatigue Behaviour of Alloy Steel in the Very High Cycle Region 18002

Yoshinobu Shimamura, Reo Kasahara, Hitoshi Ishii, Keiichiro Tohgo, Tomoyuki Fujii, Toru Yagasaki and Soichiro Sumida

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930018002

• Abstract
• PDF (336.1 KB)
• References

Open Access

Ultrasonic fatigue testing under multiaxial loading conditions on a railway wheel 18003

Pedro R. da Costa, Henrique Soares, Luís Reis and Manuel Freitas

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930018003

• Abstract
• PDF (662.5 KB)
• References

Open Access

Ultrasonic fatigue experiments with biaxial cruciform specimens 18004

Pedro R. da Costa, Diogo Montalvão, Manuel Freitas and Luis Reis

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930018004

• Abstract
• PDF (530.4 KB)
• References

Welding

Open Access

The peak stress method applied to the fatigue assessment of tube-tube steel joints with weld ends under multiaxial loadings 19001

Giovanni Meneghetti, Alberto Campagnolo, Michael Vormwald and Ehsan Shams

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930019001

• Abstract
• PDF (619.0 KB)
• References

Open Access

Multiaxial fatigue assessment of welded steel details according to the peak stress method based on tetra elements 19002

Alberto Campagnolo, Giovanni Meneghetti, Vittorio Babini, Matteo Riboli and Andrea Spagnoli

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930019002

• Abstract
• PDF (1.364 MB)
• References

Open Access

A notch stress method for fatigue life prediction of spot-welded joints 19003

Changjian Wei and Hong Tae Kang

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930019003

• Abstract
• PDF (582.9 KB)
• References

Open Access

Reproducibility of pop-in using heterogeneous welded joint specimen and cohesive surface model 19004

Sohei Kanna, Yoichi Yamashita and Tomoya Kawabata

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930019004

• Abstract
• PDF (966.1 KB)
• References

Open Access

Evaluation of residual stresses in a tube-to-plate welded joint 19005

Andrea Chiocca, Francesco Frendo and Leonardo Bertini

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201930019005

• Abstract
• PDF (344.4 KB)
• References