Open Access
Issue |
MATEC Web Conf.
Volume 300, 2019
ICMFF12 - 12th International Conference on Multiaxial Fatigue and Fracture
|
|
---|---|---|
Article Number | 08005 | |
Number of page(s) | 9 | |
Section | LCF or Cyclic Behaviour | |
DOI | https://doi.org/10.1051/matecconf/201930008005 | |
Published online | 02 December 2019 |
- B. L. Mordike and T. Ebert, “Magnesium Properties applications potential, ” Mater. Sci. Eng. A, 302, no. 1, pp. 37–45, 2001. [CrossRef] [Google Scholar]
- F. Pan, M. Yang, and X. Chen, “A Review on Casting Magnesium Alloys: Modification of Commercial Alloys and Development of New Alloys, ” J. Mater. Sci. Technol., 32, no. 12, pp. 1211–1221, 2016. [CrossRef] [Google Scholar]
- A. Hadadzadeh, M. A. Wells, S. Kumar, H. Jahed, and B. W. Williams, “Role of compression direction on recrystallization behavior and texture evolution during hot deformation of extruded ZK60 magnesium alloy, ” J. Alloys Compd., 702, pp. 274–289, 2017. [CrossRef] [Google Scholar]
- A. A. Roostaei and H. Jahed, “Role of loading direction on cyclic behaviour characteristics of AM30 extrusion and its fatigue damage modelling, ” Mater. Sci. Eng. A, 670, pp. 26–40, 2016. [CrossRef] [Google Scholar]
- Y. Z. Wu, H. G. Yan, J. H. Chen, S. Q. Zhu, B. Su, and P.-L. Zeng, “Microstructure and mechanical properties of ZK60 magnesium alloy fabricated by high strain rate multiple forging, ” Mater. Sci. Eng. A, 29, no. 1, pp. 54–59, 2013. [Google Scholar]
- J. Albinmousa and H. Jahed, “Multiaxial effects on LCF behaviour and fatigue failure of AZ31B magnesium extrusion, ” Int. J. Fatigue, 67, pp. 103–116, 2014. [CrossRef] [Google Scholar]
- H. Jahed and J. Albinmousa, “Multiaxial behaviour of wrought magnesium alloys – A review and suitability of energy-based fatigue life model, ” Theor. Appl. Fract. Mech., 73, pp. 97–108, 2014. [CrossRef] [Google Scholar]
- J. Albinmousa, H. Jahed, and S. Lambert, “Cyclic behaviour of wrought magnesium alloy under multiaxial load, ” Int. J. Fatigue, 33, no. 8, pp. 1127–1139, 2011. [CrossRef] [Google Scholar]
- A. A. Roostaei and H. Jahed, “Multiaxial cyclic behaviour and fatigue modelling of AM30 Mg alloy extrusion, ” Int. J. Fatigue, 97, pp. 150–161, 2017. [CrossRef] [Google Scholar]
- S. M. H. Karparvarfard, S. K. Shaha, S. B. Behravesh, H. Jahed, and B. W. Williams, “Microstructure, texture and mechanical behavior characterization of hot forged cast ZK60 magnesium alloy, ” J. Mater. Sci. Technol., 2017. [Google Scholar]
- H.SMH. Karparvarfard, S.K. Shaha, A. Hadadzadeh. S.B. behravesh, Jahed, M. A. Wells, and B. Williams, “Characterization of Semi-Closed Die-Forged ZK60 Mg Alloy Extrusion, ” Magnes. Technol. 2017, pp. 329–334, 2017. [CrossRef] [Google Scholar]
- S. M. H. Karparvarfard, S. K. Shaha, S. B. Behravesh, H. Jahed, and B. W. Williams, “Fatigue characteristics and modeling of cast and cast-forged ZK60 magnesium alloy, ” Int. J. Fatigue, 118, no. November 2017, pp. 282–297, 2019. [CrossRef] [Google Scholar]
- S. Karparvarfard, S. K. Shaha, S. B. Behravesh, H. Jahed, and B. Williams, “Fatigue life improvement of cast ZK60 Mg alloy through low temperature closed-die forging for automotive applications, ” MATEC Web Conf., 165, p. 06009, 2018. [CrossRef] [Google Scholar]
- N. Ogawa, M. Shiomi, and K. Osakada, “Forming limit of magnesium alloy at elevated temperatures for precision forging, ” Int. J. Mach. Tools Manuf., 42, no. 5, pp. 607–614, 2002. [CrossRef] [Google Scholar]
- G. Yu, “Forging Specimen Design for Magnesium Alloys, ” (Master’s Thesis), Retrieved from Univ. Waterloo Database, 2016. [Google Scholar]
- “ASTM E2207 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens, ” ASTM Int. [Google Scholar]
- Y. Xu-yue, J. I. Ze-sheng, H. Miura, and T. Sakai, “Dynamic recrystallization and texture development during hot deformation of magnesium alloy AZ31, ” Trans. Nonferrous Met. Soc. China, 19, no. 1, pp. 55–60, 2008. [Google Scholar]
- L. Wu, A. Jain, D. W. Brown, G. M. Stoica, S. R. Agnew, B. Clausen, D. E. Fielden, and P. K. Liaw, “Twinning–detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A, ” Acta Mater., 56, no. 4, pp. 688–695, 2008. [CrossRef] [Google Scholar]
- S. M. H. Karparvarfard, S. K. Shaha, S. B. Behravesh, H. Jahed, and B. W. Williams, “Microstructure, texture and mechanical behavior characterization of hot forged cast ZK60 magnesium alloy, ” J. Mater. Sci. Technol., 2017. [Google Scholar]
- M. H. Yoo, “Slip, twinning, and fracture in hexagonal close-packed metals, ” Metall. Trans. A, 12, no. 3, pp. 409–418, 1981. [Google Scholar]
- D. W. Brown, A. Jain, S. R. Agnew, and B. Clausen, “Twinning and Detwinning During Cyclic Deformation of Mg Alloy AZ31B, ” Mater. Sci. Forum, 539–543, pp. 3407–3413, 2007. [CrossRef] [Google Scholar]
- J. B. Jordon, J. B. Gibson, M. F. Horstemeyer, H. El Kadiri, J. C. Baird, and A. A. Luo, “Effect of twinning, slip, and inclusions on the fatigue anisotropy of extrusion-textured AZ61 magnesium alloy, ” Mater. Sci. Eng. A, 528, no. 22–23, pp. 6860–6871, 2011. [CrossRef] [Google Scholar]
- H. Jahed, A. Varvani-Farahani, M. Noban, and I. Khalaji, “An energy-based fatigue life assessment model for various metallic materials under proportional and non-proportional loading conditions, ” Int. J. Fatigue, 29, no. 4, pp. 647–655, 2007. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.