Open Access
MATEC Web Conf.
Volume 300, 2019
ICMFF12 - 12th International Conference on Multiaxial Fatigue and Fracture
Article Number 03006
Number of page(s) 9
Section Additive Manufacturing
Published online 02 December 2019
  1. E. Olakanmi, R. Cochrane, K. Dalgarno, A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties, Progress in Materials Science 74, 401 (2015) [CrossRef] [Google Scholar]
  2. S. Siddique, M. Imran, F. Walther, Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy, International Journal of Fatigue 94, 246 (2017) [CrossRef] [Google Scholar]
  3. K. Yang, P. Rometsch, T. Jarvis, J. Rao, S. Cao, C. Davies, X. Wu, Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting, Materials Science and Engineering: A 712, 166 (2018) [CrossRef] [Google Scholar]
  4. S. Romano, A. Brückner-Foit, A. Brandão, J. Gumpinger, T. Ghidini, S. Beretta, Fatigue properties of AlSi10mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength, Engineering Fracture Mechanics 187, 165 (2018) [CrossRef] [Google Scholar]
  5. Y. Murakami, Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, elsevier edn. (2002) [Google Scholar]
  6. T. Kitagawa, Applicability of fracture mechanics to very small cracks, ASM Proceedings of 2nd international conference on mechanical Metalspark pp. 627–631 (1976) [Google Scholar]
  7. M. El Haddad, T. Topper, K. Smith, Prediction of non propagating cracks, Engineering Fracture Mechanics 11, 573 (1979) [CrossRef] [Google Scholar]
  8. V. Le, Ph.D. thesis, Ecole Nationale Supérieure des Arts et Métiers (2016) [Google Scholar]
  9. K.J. Miller, The Short Crack Problem, Fatigue & Fracture of Engineering Materials and Structures 5, 223 (1982) [CrossRef] [Google Scholar]
  10. D. Taylor, Geometrical effects in fatigue: a unifying theoretical model, International Journal of Fatigue 21, 413 (1999) [CrossRef] [Google Scholar]
  11. D. Taylor, Prediction of fatigue failure location on a component using a critical distance method, International Journal of Fatigue 22, 735 (2000) [CrossRef] [Google Scholar]
  12. Y. Nadot, T. Billaudeau, Multiaxial fatigue limit criterion for defective materials, Engineering Fracture Mechanics 73, 112 (2006) [CrossRef] [Google Scholar]
  13. B. Crossland, Effect of large hydrostatic pressures on the torsional fatigue strength of fan alloy steel, in Proceedings of the international conference on fatigue of metals (London and New York, 1956), pp. 138–149 [Google Scholar]
  14. S. Romano, A. Brandão, J. Gumpinger, M. Gschweitl, S. Beretta, Qualification of AM parts: Extreme value statistics applied to tomographic measurements, Materials & Design 131, 32 (2017) [Google Scholar]
  15. J.Y. Buffière, S. Savelli, P. Jouneau, E. Maire, R. Fougères, Experimental study of porosity and its relation to fatigue mechanisms of model Al–Si7–Mg0.3 cast Al alloys, Materials Science and Engineering: A 316, 115 (2001) [CrossRef] [Google Scholar]
  16. I. Serrano-Munoz, Ph.D. thesis, Institut National des Sciences Appliquées de Lyon (2014) [Google Scholar]
  17. P. Mu, Y. Nadot, C. Nadot-Martin, A. Chabod, I. Serrano-Munoz, C. Verdu, Influence of casting defects on the fatigue behavior of cast aluminum AS7g06-T6, International Journal of Fatigue 63, 97 (2014) [CrossRef] [Google Scholar]
  18. P. Mu, Y. Nadot, I. Serrano-Munoz, A. Chabod, Multiaxial fatigue design of cast parts: Influence of complex defect on cast AS7g06-T6, Engineering Fracture Mechanics 131, 315 (2014) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.