Issue |
MATEC Web Conf.
Volume 300, 2019
ICMFF12 - 12th International Conference on Multiaxial Fatigue and Fracture
|
|
---|---|---|
Article Number | 08010 | |
Number of page(s) | 10 | |
Section | LCF or Cyclic Behaviour | |
DOI | https://doi.org/10.1051/matecconf/201930008010 | |
Published online | 02 December 2019 |
Multiaxial Inverse Stress Analysis for Indentation Creep
1
Ritsumeikan University, 1-1-1 Nojihigashi Kusatsu Shiga, 525-8577, Japan
2
Osaka Sangyo University, 3-1-1 Nakagaichi Daito, Osaka, 574-8530, Japan
3
Hiroshima Kokusai Gakuin University, 6-20-1 Nakano Akiku Hiroshima, Hiroshima, 739-0321, Japan
* Corresponding author: sakanem@se.ritsumei.ac
This paper presents an extracting method of creep exponent and coefficient in Norton’s law from an indentation creep test analytically, assisted by a finite element analysis. Previous studies extracted only the creep exponent empirically with no theoretical verification. No extracting method on the creep coefficient has been proposed from an indentation creep test. By analyzing multiaxial stress states under a ball indenter in combination of a creep constitutive equation, an analytical method to derive the creep coefficient is developed. The method is verified to have a satisfactorily accuracy to determine the two material constants in Norton’s law by finite element analyses and in experiments.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.