Open Access
Issue
MATEC Web Conf.
Volume 300, 2019
ICMFF12 - 12th International Conference on Multiaxial Fatigue and Fracture
Article Number 08007
Number of page(s) 7
Section LCF or Cyclic Behaviour
DOI https://doi.org/10.1051/matecconf/201930008007
Published online 02 December 2019
  1. D.L McDowell Modeling and experiments in plasticity. Int J solids struct 37: 293-309 (2004) [Google Scholar]
  2. K. Kanazawa, K. J. Miller, M. W. Brown Fatigue Eng. Mater. Struct 2, Cyclic deformationof 1% Cr‐Mo‐V steel under out‐of‐phase loads 2 :217-228 (1979) [Google Scholar]
  3. E. Krempl, H. Lu. The hardening and rate-dependent behavior of fully annealed AISI type 304 stainless steel under biaxial in-phase and out-of-phase strain cycling at room temperature. ASME. J. eng. Mater Technol 106: 376-382 (1984) [CrossRef] [Google Scholar]
  4. S.H. Doong, D. F. Socie, I. M. Robertson. Dislocation substructures and nonproportional hardening. ASME J. eng. Mater Technol, 112: 456-464 (1990) [CrossRef] [Google Scholar]
  5. G.Z Kang, Q. Gao. Temperature-dependent cyclic deformation of SS304 stainless steel under non-proportionally multiaxial load and its constitutive modeling. Key. Eng. Mat, 274: 247-252 (2004) [CrossRef] [Google Scholar]
  6. E. Tanaka, S. Murakami, M. Ooka. Effects of strain path shapes on non-proportional cyclic plasticity.J. Mech. Phys. Solids 33: 559-575 (1985) [CrossRef] [Google Scholar]
  7. N. Shamsaei, A. Fatemi, D. F. Socie. Multiaxial cyclic deformation and non-proportional hardening employing discriminating load paths. Int. J. Plasticity 26: 1680-1701 (2010) [CrossRef] [Google Scholar]
  8. T. Itoh, M. Sakane, M. Ohnami, K Ameyama. Effect of stacking fault energy on cyclic constitutive relation under non-proportional loading. J. Soc. Mat. Sci 41 :1361-1367 (1992) [CrossRef] [Google Scholar]
  9. D.L. McDowell, D.R. Stahl, S.R. Stock, S. D. Antolovich. Biaxial path dependence of deformation substructure of type 304 stainless steel., Mettall. Trans. A 19A: 1277-1293 (1988) [Google Scholar]
  10. N. Shamsaei, A. Fatemi, D. F. Socie. Multiaxial fatigue evaluation using discriminating strain paths Int. J. Fatigue 33: 597-609 (2011) [CrossRef] [Google Scholar]
  11. S. Kida, T. Itoh, M. Sakane, M. Ohnami, DF. Socie. Dislocation structure and non‐proportional hardening of Type 304 stainless steel, Fat. & Fract. Eng.Mat. & Struc. 20: 1375-86 (1997) [CrossRef] [Google Scholar]
  12. DF. Socie. Multiaxial fatigue damage models. Journal of Engineering Materials and Technology. 109: 293-298 (1987) [CrossRef] [Google Scholar]
  13. R. Dey, A. Das, S. Tarafder, and S. Sivaprasad. State of Grain Boundary Misorientation Due to Multiaxiality in Austenitic Stainless Steel Metall. Trans. A 50: 47-51 (2019) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.