Open Access
Issue
MATEC Web Conf.
Volume 300, 2019
ICMFF12 - 12th International Conference on Multiaxial Fatigue and Fracture
Article Number 19001
Number of page(s) 9
Section Welding
DOI https://doi.org/10.1051/matecconf/201930019001
Published online 02 December 2019
  1. P. Lazzarin, R. Tovo, A notch intensity factor approach to the stress analysis of welds, Fat. Fract. Eng. Mater. Struct., 21, 1089–1103. (1998) [CrossRef] [Google Scholar]
  2. D. Radaj, C.M. Sonsino, W. Fricke, Fatigue Assessment of Welded Joints by Local Approaches, Woodhead Publishing, Cambridge, (2006). [Google Scholar]
  3. D. Radaj, M. Vormwald, Advanced Methods of Fatigue Assessment, Springer Berlin Heidelberg, Berlin, Heidelberg, (2013). [CrossRef] [Google Scholar]
  4. B. Gross, A. Mendelson, Plane elastostatic analysis of V-notched plates, Int. J. Fract. Mech., 8, 267–276 (1972) [CrossRef] [Google Scholar]
  5. P. Lazzarin, P. Livieri, F. Berto, M. Zappalorto, Local strain energy density and fatigue strength of welded joints under uniaxial and multiaxial loading, Eng. Fract. Mech., 75, 1875–1889 (2008) [CrossRef] [Google Scholar]
  6. P. Livieri, P. Lazzarin, Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy values, Int. J. Fract., 133, 247–276 (2005) [CrossRef] [Google Scholar]
  7. P. Lazzarin, C.M. Sonsino, R. Zambardi, A notch stress intensity approach to assess the multiaxial fatigue strength of welded tube-to-flange joints subjected to combined loadings, Fat. Fract. Eng. Mater. Struct., 27, 127–140 (2004) [CrossRef] [Google Scholar]
  8. Eurocode 3: Design of steel structures – part 1–9: Fatigue, CEN, (2005). [Google Scholar]
  9. P. Lazzarin, F. Berto, M. Zappalorto, Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes: Theoretical bases and applications, Int. J. Fat., 32, 1559–1567. (2010) [CrossRef] [Google Scholar]
  10. G. Meneghetti, P. Lazzarin, Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V-notched components, Fat. Fract. Eng. Mater. Struct., 30, 95–106 (2007) [CrossRef] [Google Scholar]
  11. G. Meneghetti, The use of peak stresses for fatigue strength assessments of welded lap joints and cover plates with toe and root failures, Eng. Fract. Mech., 89, 40–51 (2012) [CrossRef] [Google Scholar]
  12. G. Meneghetti, The peak stress method for fatigue strength assessment of tube-to-flange welded joints under torsion loading, Weld. World., 57, 265–275 (2013) [CrossRef] [Google Scholar]
  13. G. Meneghetti, A. Campagnolo, D. Rigon, Multiaxial fatigue strength assessment of welded joints using the Peak Stress Method – Part I: Approach and application to aluminium joints, Int. J. Fat., 101, 328–342 (2017) [CrossRef] [Google Scholar]
  14. G. Meneghetti, A. Campagnolo, D. Rigon, Multiaxial fatigue strength assessment of welded joints using the Peak Stress Method – Part II: Application to structural steel joints, Int. J. Fat., 101, 343–362 (2017) [CrossRef] [Google Scholar]
  15. E. Shams, M. Vormwald, Fatigue of weld ends under combined loading, Int. J. Fat., 100, 627–638 (2017) [CrossRef] [Google Scholar]
  16. M. Kaffenberger, M. Vormwald, Considering size effects in the notch stress concept for fatigue assessment of welded joints. Comp. Mat. Sci., 64, 71-78 (2012) [CrossRef] [Google Scholar]
  17. O. Hertel, M. Vormwald, Statistical and geometrical size effects in notched members based on weakest-link and short-crack modelling. Engng. Frac. Mech. 95, 72-83 (2012) [CrossRef] [Google Scholar]
  18. J. Wiebesiek, K. Störzel, T. Bruder, H. Kaufmann, Multiaxial fatigue behaviour of laserbeam-welded thin steel and aluminium sheets under proportional and non-proportional combined loading. Int J Fatigue 33, 992–1005 (2011) [Google Scholar]
  19. G. Meneghetti, C. Guzzella, B. Atzori, The peak stress method combined with 3D finite element models for fatigue assessment of toe and root cracking in steel welded joints subjected to axial or bending loading, Fat. Fract. Eng. Mater. Struct., 37, 722–739 (2014) [CrossRef] [Google Scholar]
  20. L. Pook, A 50 year retrospective review of three-dimensional effects at cracks and sharp notches, Fat. Fract. Eng. Mater. Struct., 36, 699–723 (2013) [CrossRef] [Google Scholar]
  21. L. Pook, A. Campagnolo, F. Berto, Coupled fracture modes of discs and plates under anti-plane loading and a disc under in-plane shear loading, Fat. Fract. Eng. Mater. Struct., 39, 924–938 (2016) [CrossRef] [Google Scholar]
  22. G. Meneghetti, A. Campagnolo, V. Babini, M. Riboli, A. Spagnoli, Multiaxial fatigue assessment of welded steel details according to the peak stress method: industrial case studies, Int. J. Fat. (2019) submitted [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.