Free Access to the whole issue

Open Access

About the conference

Published online: 04 August 2021

• PDF (1.02 MB)

Open Access

Statement of Peer review

Published online: 04 August 2021

• PDF (148 KB)

Open Access

Preface 00001

Nicolae Florin Cofaru

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134300001

• PDF (404.1 KB)

Design, Manufacturing and Management of Technological Equipment and Systems

Open Access

Dynamic behaviour of composites reinforced with needles from fir trees 01001

Alexandru Ioan Rădoi, Cosmin Mihai Miriţoiu, Mihaela Bogdan, Marius Marinel Stănescu, Dumitru Bolcu and Ionuţ Geonea

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301001

• PDF (1013 KB)
• References

Open Access

Comparisons between some composites reinforced with corn leaves and different matrices 01002

Alexandru Ioan Rădoi, Cosmin Mihai Miriţoiu and Claudiu Nicolicescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301002

• PDF (981.9 KB)
• References

Open Access

Study on the influence of technological parameters on 3D printing with sla technology 01003

Andrei Komjaty, Elena Stela Wisznovszky (Muncut) and Lavinia Ioana Culda

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301003

• PDF (927.8 KB)
• References

Open Access

The influence of the cycloid disc bearing type on the cycloidal speed reducer efficiency 01004

Milan Vasic, Mirko Blagojevic, Miloš Matejic and Ileana Ioana Cofaru

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301004

• PDF (879.0 KB)
• References

Open Access

Nanoparticles Size Distribution Assessment During Early Synthesis Stages 01005

Dan Chicea, Mirela Maria Codescu, Alexandra Nicolae, Oleksandr Doroshkevych, Akhmed Islamov and Miroslaw Kulik

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301005

• PDF (899.6 KB)
• References

Open Access

Analysis of technology and machining devices for cleaning onion in the food industry 01006

Paweł Woźniak, Stanisław Nosal and Agata Bieńczak

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301006

• PDF (1.061 MB)
• References

Open Access

Design and additive manufacturing of brushless electric motor components 01007

Camil Lancea, Valentin-Marian Stamate, Lucia-Antoneta Chicoş, Sebastian-Marian Zaharia, Alin-Mihai Pop, Ionut-Stelian Pascariu and George-Răzvan Buican

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301007

• PDF (788.6 KB)
• References

Open Access

The study and optimization of the behavior and energy absorbed in the frontal impact by a rectangular metal workpiece with an Origami core 01008

Robert-Marian Bleotu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301008

• PDF (1.462 MB)
• References

Open Access

Modular milling cutter with inner-cooling network 01009

Mircea-Viorel Dragoi, Dorin Mircea Rosca, Milena Flavia Folea and Gheorghe Oancea

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301009

• PDF (919.8 KB)
• References

Open Access

Modeling and improvement of the tricycle braking system for controlled skidding 01010

Robert-Marian Bleotu and Cosmin Preda

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301010

• PDF (1.747 MB)
• References

Open Access

Ionic Nitriding of Certain Parts Protected on Nonfunctional Surfaces With Special Paints. Electric Energy Consumed 01011

Marius Bibu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301011

• PDF (671.5 KB)
• References

Open Access

The Results of Changing the Current Solution Concept of Universal Motor Gear Reducers with Helical Gears 01012

Milan Rackov, Ivan Knežević, Srđan Nikačević, Dijana Čavić, Mirjana Bojanić Šejat, Marko Penčić, Maja Čavić, Siniša Kuzmanović and Nicolae Florin Cofaru

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134301012

• PDF (617.7 KB)
• References

Management, Modelling and Monitoring of Manufacturing Processes

Open Access

Evaluation of the efficiency of the consolidation treatment with Paraloid B72, performed on artworks with degraded wood support 02001

Constantin Ştefan Ionescu, Aurel Lunguleasa, Anamaria Avram and Cosmin Spîrchez

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302001

• PDF (1.747 MB)
• References

Open Access

Plane surface lapping technological processor 02002

Andrea Deaconescu and Tudor Deaconescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302002

• PDF (777.8 KB)
• References

Open Access

Research regarding assembly flow optimization of wiring harness in automotive industry 02003

Ioana Stefan (Iorga), Adrian Constantin Popescu, Cicerone Laurentiu Popa, Tiberiu Gabriel Dobrescu and Costel Emil Cotet

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302003

• PDF (1.465 MB)
• References

Open Access

FEA Modelling of the Combined Hard TurningRolling Process Used at Bearing Rings 02004

Gures Dogan, Ilhan Mehmet, Dragoş Florin Chitariu, Cătălin Gabriel Dumitraş and Vasile Ionuţ Crîşmaru

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302004

• PDF (1.466 MB)
• References

Open Access

Solder joint reliability based on creep strain energy density for SAC305 and doped SAC solders 02005

Ramiro Sebastian Vargas Cruz and Viktor Gonda

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302005

• PDF (1.025 MB)
• References

Open Access

Identifying speeds and accelerations for the systems within a didactic stand operated by means of stepper motors 02006

Emilia-Maria Popescu, Constantin-Adrian Popescu, Cicerone Laurentiu Popa, Gabriel-Tiberiu Dobrescu and Costel Emil Cotet

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302006

• PDF (1.143 MB)
• References

Open Access

Application of single minute exchange of die tool in a food industry company to eliminate waste 02007

Hubert Kędziora and Justyna Trojanowska

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302007

• PDF (840.3 KB)
• References

Open Access

Aspects regarding the organization of printing production in the context of Industry 4.0 02008

Răzvan-George Răcheru, Lucia Adăscăliţa, Dorin-Vasile Piţigoi and Emilia Bălan

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302008

• PDF (957.4 KB)
• References

Open Access

Study regarding the influence of material type on economic objectives in MEX fabrication 02009

Mihaela-Elena Ulmeanu, Cristian-Vasile Doicin, Liviu Roşca, Allan Ew Rennie, Tom Abram and Andrei-Bogdan Nuţă

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302009

• PDF (1.165 MB)
• References

Open Access

The advantages of combining 3D printing with turning process. Case study 02010

Dan Claudiu Negrău, Gavril Grebenisan, Ion Cosmin Gherghea and Daniel Anton

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302010

• PDF (877.3 KB)
• References

Open Access

A critical analysis and optimization of the testing & validation activities inside an automotive partsfactory 02011

Lucian-Petru Păvăloi and Florin Negoescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134302011

• PDF (1.044 MB)
• References

Advanced Manufacturing Technologies

Open Access

Kanban Systems in the Context of the Enterprise Systems 03001

Livia Dana Beju and Stanislaw Legutko

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303001

• PDF (754.8 KB)
• References

Open Access

Algorithm for workcells design 03002

Livia Dana Beju

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303002

• PDF (413.0 KB)
• References

Open Access

Locating Error when Clamping Workpiece between Centers 03003

Laurentiu Slătineanu, Margareta Coteaţă, Oana Dodun, Gheorghe Nagîţ, Adelina Hriţuc, Irina Beşliu-Băncescu and Mihai Boca

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303003

• PDF (454.5 KB)
• References

Open Access

Using IoT to Dynamically Test Smart Connected Devices 03004

Carmen Cristiana Cazacu, Florina Chiscop and Dragos Alexandru Cazacu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303004

• PDF (1.087 MB)
• References

Open Access

Using Digital Twining in Fast-food Production Chain Simulation 03005

Florina Chiscop, Bogdan Necula, Carmen Cristiana Cazacu and Cristian Eugen Stoica

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303005

• PDF (1.413 MB)
• References

Open Access

FEM Analysis of the Welding Seams Geometry in Case of Fillet Welds 03006

Claudiu Babiş, Andrei Dimitrescu, Ana Maria Alecusan and Marcela Babiş

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303006

• PDF (553.4 KB)
• References

Open Access

Modern Technologies for Micro-drilling of the Fuel Injector Nozzle used in Motor Vehicles - A Review of the Literature 03007

Dorinel Popa and Cristin-Olimpiu Morariu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303007

• PDF (622.6 KB)
• References

Open Access

Numerical-Experimental Study Regarding the Single Point Incremental Forming Process 03008

Nicolae Rosca, Mihaela Oleksik and Liviu Rosca

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303008

• PDF (1.406 MB)
• References

Open Access

Experimental Study Regarding PA and PE Sheets on Single Point Incremental Forming Process 03009

Nicolae Rosca, Mihaela Oleksik and Valentin Oleksik

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303009

• PDF (1.068 MB)
• References

Open Access

Changes of Structure and Physical-Mechanical Properties in Alloy Steels Thermochemically Treated by Plasma Nitriding 03010

Florin Ciofu and Marius Bibu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303010

• PDF (707.1 KB)
• References

Open Access

Procedure and Installation for Determining the Filtering Capacity 03011

Sorin Butuc (Anghel), Simona Matei, Maria Stoicanescu and Aurel Crişan

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303011

• PDF (624.7 KB)
• References

Open Access

Comparison of Artificial Neural Network Model and Response Surface Methodology for Springback Prediction 03012

Iliass El Mrabti, Abdelhamid Touache, Abdelhadi El Hakimi and Abderahim Chamat

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303012

• PDF (490.9 KB)
• References

Open Access

Aluminium-steel plating by press welding 03013

Dan Dobrotă, Florin Ciofu and Valentin Petrescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303013

• PDF (520.3 KB)
• References

Open Access

Methods of Temperature Monitoring in Low Voltage Electrical Cables using Composite Materials 03014

Mircea Florin Drăghici and Maria Stoicănescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134303014

• PDF (945.7 KB)
• References

Computer-Aided Technologies (CAD/CAM/CAE - CAX), Virtual Engineering and Reverse Engineering

Open Access

Optimization of automotive cooling systems characteristics using finite element analysis 04001

George Gabriel Chiriac and Catalin Gabriel Dumitras

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304001

• PDF (1.197 MB)
• References

Open Access

Virtual commissioning of automated manufacturing systems — Quality-handling station case study 04002

Richard Skýpala and Roman Ružarovský

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304002

• PDF (1.201 MB)
• References

Open Access

A speech recognition approach for an industrial training station 04003

Valentin-Cătălin Govoreanu, Adrian-Nicolae Ţocu, Alin-Marius Cruceat and Dragoş Circa

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304003

• PDF (629.2 KB)
• References

Open Access

Sizing and shape optimization material use in 10 bar trusses 04004

Nenad Petrović, Nenad Kostić, Vesna Marjanović, Ileana Ioana Cofaru and Nenad Marjanović

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304004

• PDF (389.7 KB)
• References

Open Access

Applied study on the rotational molding and processing technology of rotational molds 04005

Alina Bianca Pop and Aurel Mihail Ţîţu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304005

• PDF (922.5 KB)
• References

Open Access

Research on the machining process modeling of a rotational mold using CAM applications 04006

Aurel Mihail Ţîţu and Alina Bianca Pop

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304006

• PDF (1.697 MB)
• References

Open Access

Common defects of parts manufactured through single point incremental forming 04007

Mihai Popp, Gabriela Rusu, Sever-Gabriel Racz and Valentin Oleksik

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304007

• PDF (646.2 KB)
• References

Open Access

Design for 3D Printing: case study for a cold plastic deformation mould 04008

Andrei-Bogdan Nuţă, Mihaela-Elena Ulmeanu and Cristian-Vasile Doicin

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304008

• PDF (857.0 KB)
• References

Open Access

Contributions regarding 3D modelling of biomechanics of the foot 04009

Nicolae Florin Cofaru, Andrei Horia Brănescu, Vesna Marjanovic, Mirko Blagojevic and Vlăduţ Mihuţ

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304009

• PDF (1.049 MB)
• References

Open Access

CAD modelling of the human femur taking into account the structure of the bone 04010

Andrei Horia Brănescu, Ioana-Codruţa Lebădă, Vlăduţ Mihuţ, Nenad Marjanovic and Milan Rackov

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304010

• PDF (919.9 KB)
• References

Open Access

The Topological Optimization and the Design for Additive Manufacturing of a Steering Knuckle for Formula SAE Electric Vehicle 04011

Theodor-Florian Zach and Mircea-Cristian Dudescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304011

• PDF (2.005 MB)
• References

Open Access

Simulating traditional textile heritage motifs by applying CAD-CAM-CAE tool for furniture decoration 04012

Antonela Lungu, Antonius Androne, Lidia Gurău and Camelia Coşereanu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134304012

• PDF (2.705 MB)
• References

Quality Engineering and Management

Open Access

Uncertainty and Managers’ skills in Industrial Innovation Processes 05001

Arik Sadeh and Cristina Feniser

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305001

• PDF (411.9 KB)
• References

Open Access

Improving service-level agreements for critical systems using big data monitoring techniques 05002

Ioan Cristian Schuszter and Marius Cioca

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305002

• PDF (675.6 KB)
• References

Open Access

Intellectual Capital Management Increase in Offshoring 05003

Marius Gal and Lucian Lobonţ

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305003

• PDF (676.2 KB)
• References

Open Access

The need and implications of the human capital management system 05004

Andreea Simina Porancea-Răulea

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305004

• PDF (428.0 KB)
• References

Open Access

Can team building be a game changer for Startups? 05005

Raluca Dovleac and Andreea Ionică

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305005

• PDF (695.3 KB)
• References

Open Access

Development of Brasov SMEs through public financing of innovative products or services 05006

Nicoleta Stelea and Gavrilă Calefariu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305006

• PDF (501.0 KB)
• References

Open Access

Increasing the performance of a system by changing reliability 05007

Claudiu Babiş, Andrei Dimitrescu, Ana Maria Alecusan and Marcela Babiş

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305007

• PDF (811.7 KB)
• References

Open Access

Quality Cost and Economic Analysis. A Synthesis in the Manufacturing Systems 05008

Elif Ocakci, Jörg Niemann, Caius Luminosu and Alin Artene

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305008

• PDF (773.5 KB)
• References

Open Access

An Overview of the Production Capacity and Operational Optimization in the Framework of Industry 4.0 05009

Elif Ocakci, Jörg Niemann, Caius Luminosu and Ilie Taucean

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305009

• PDF (983.3 KB)
• References

Open Access

Prediction of defects using machine learning techniques in order to improve quality management system – A case study 05010

Adina Sârb, Cristina Burja Udrea, Daniela Nagy–Oniţa, Liliana Itul and Maria Popa

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305010

• PDF (967.3 KB)
• References

Open Access

Assessment of process stability and capability in a manufacturing organization: a case study 05011

Carmen Simion

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134305011

• PDF (1.565 MB)
• References

Transport Engineering and Road Vehicles, Traffic Management

Open Access

Bioethanol produced from regenerative wooden resource to operate an organic Rankine cycle-waste heat recovery system in case of a tractor propulsion Diesel engine: preliminary simulation results 06001

Bogdan Radu and Alexandru Racovitza

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134306001

• PDF (618.4 KB)
• References

Open Access

Study regarding the improvement of the postage transport system in the city of Sibiu 06002

Liliana Georgeta Popescu and Ovidiu Ioan Moldovan

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134306002

• PDF (1.535 MB)
• References

Open Access

Autonomous Control System for an Electric ATV 06003

Cosmin Rus, Monica Leba, Nicoleta Negru, Răzvan Marcuş and Alin Costandoiu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134306003

• PDF (1.455 MB)
• References

Open Access

Aspects regarding the appreciation of regularity and punctuality in the public transport system from Sibiu, Romania 06004

Carmen Purcar, Mircea Bădescu and Marinela Inţă

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134306004

• PDF (614.5 KB)
• References

Open Access

Space traffic management - key issue for Industry 4.0 06005

Ulpia Elena Botezatu and Olga Bucovetchi

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134306005

• PDF (322.6 KB)
• References

Open Access

Considerations Regarding the Analysis and Interpretation of Traumatic Lesional Mechanisms in Road Accidents 06006

Lucian Tarnu and Cristian Deac

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134306006

• PDF (1.471 MB)
• References

Management and Economic Engineering

Open Access

Collaborations between universities and the business environment in Romania 07001

Dan Miricescu, Martin Heinisch and Laura Heinisch

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307001

• PDF (923.6 KB)
• References

Open Access

Are electric vehicles eco-friendly products? A review from life cycle and sustainability perspective 07002

Niculina Alexandra Grigore and Claudiu Vasile Kifor

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307002

• PDF (702.4 KB)
• References

Open Access

Modern technologies used in health crisis management during the Covid-19 pandemic 07003

Nicu-Pantelimon Rotaru and Nicolae Taşcă

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307003

• PDF (1.122 MB)
• References

Open Access

Managerial Communication in the Vision of Hunedoara County Managers 07004

Nicolae Taşcă, Nicu-Pantelimon Rotaru and Lucian Lupu-Dima

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307004

• PDF (653.8 KB)
• References

Open Access

Potential Resistance of Employees to Change in the Transition to Industry 5.0 07005

Gina-Maria Moraru and Daniela Popa

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307005

• PDF (672.4 KB)
• References

Open Access

A Managerial Research of Online Education in the Primary and Secondary Romanian Education System During COVID 19 Crisis 07006

Eduard Edelhauser and Lucian Lupu-Dima

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307006

• PDF (1.161 MB)
• References

Open Access

In Search of Sustainable Social Impact: A System Dynamics Approach to Managing Nonprofit Organizations Operating in Multi-Project Contexts 07007

Ibrian Caramidaru and Andreea Ionica

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307007

• PDF (661.0 KB)
• References

Open Access

Technical Considerations on the Management of Coastal Areas Rehabilitation Projects 07008

Georgiana Grigoras, Ionuţ Cristian Mihalache and Eduard Edelhauser

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307008

• PDF (1.250 MB)
• References

Open Access

Model of indirect Expenses Distribution for Determining Economies of Scale 07009

Oana Panazan, Catalin Gheorghe and Gavrila Calefariu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307009

• PDF (934.5 KB)
• References

Open Access

The Importance of Respecting the Psychological Contract by Managers 07010

Gina-Maria Moraru and Daniela Popa

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307010

• PDF (742.1 KB)
• References

Open Access

Model for Industrial Business Relocation in Eastern Europe 07011

Catalin Gheorghe and Oana Panazan

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307011

• PDF (963.6 KB)
• References

Open Access

Proactive risk assessment via fuzzy approach in a decisional process of consignment stock program adoption 07012

Monica Faur and Constantin Bungău

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307012

• PDF (1.292 MB)
• References

Open Access

Fundamental elements regarding the approach of risk management within the international projects with teams in the virtual environment 07013

Iulia Dumitraşcu-Băldău, Alexandru Căpăţînă and Dănuţ Dumitru Dumitraşcu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307013

• PDF (948.1 KB)
• References

Open Access

Preliminary criteria for the energy sector: environmental and economic efficiency of investment projects 07014

Anzhelika Karaeva, Elena Magaril, Vincenzo Torretta and Elena Cristina Rada

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307014

• PDF (925.3 KB)
• References

Open Access

Managing a brand with a vision to marketing 5.0 07015

Elena Sima

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307015

• PDF (414.0 KB)
• References

Open Access

A Validation Model for Ethical Decisions in Artificial Intelligence Systems using Personal Data 07016

Radu Stefan and George Carutasu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134307016

• PDF (1021 KB)
• References

Mechanical Engineering, Mechatronics and Robotics

Open Access

New approach of designing robotics production systems using immersive virtual reality environment 08001

Radovan Holubek, Róbert Bočák and Vanessa Prajová

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308001

• PDF (1.053 MB)
• References

Open Access

Analysis of the eigenfrequencies of the basalt machine parts by the FEM 08002

Ilie Octavian Popp

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308002

• PDF (503.8 KB)
• References

Open Access

Mechatronic Design of a Four-Wheel drive mobile robot and differential steering 08003

Mihai Crenganis, Cristina Biris and Claudia Girjob

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308003

• PDF (1.242 MB)
• References

Open Access

Dynamic analysis of a five degree of freedom robotic arm using MATLAB-Simulink Simscape 08004

Mihai Crenganis, Alexandru Barsan, Melania Tera and Anca Chicea

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308004

• PDF (1.211 MB)
• References

Open Access

Incremental forming using KUKA KR210-2 industrial robot - research regarding design rules and process modelling 08005

Alexandru Bârsan, Sever-Gabriel Racz and Radu Breaz

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308005

• PDF (692.5 KB)
• References

Open Access

Design of a modular locomotion system for autonomous mobile robots 08006

Iosif-Adrian Maroşan and George Constantin

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308006

• PDF (574.5 KB)
• References

Open Access

Human Arm Motion Capture using Gyroscopic Sensors 08007

Arun Fabian Panaite, Monica Leba, Marius Leonard Olar, Remus Constantin Sibisanu and Lilla Pellegrini

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308007

• PDF (733.6 KB)
• References

Open Access

Wireless communication based on Raspberry pi and Codesys for mobile robots using IoT technology 08008

Iosif-Adrian Maroşan and George Constantin

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308008

• PDF (747.8 KB)
• References

Open Access

Position control for hybrid infinite-continuous hyper-redundant robot 08009

Cristina Pană, Cristian Vladu, Daniela Pătraşcu-Pană, Florina Besnea (Petcu), Çtefan Cismaru, Andrei Trăşculescu, Ionuţ Reşceanu and Nicu Bîzdoacă

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308009

• PDF (1.241 MB)
• References

Open Access

Possibilities of using automatic systems for correcting the position of working units of tools including soil cultivation 08010

Michał Zawada, Stanisław Legutko, Jan Szczepaniak, Roman Rogacki, Jacek Wojciechowski and Sebastian Szymczyk

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308010

• PDF (1.252 MB)
• References

Open Access

Modular Transport and Sorting System with Omnidirectional Wheels 08011

Ciprian Ion Rizescu, Andrei Ioan Pleşea and Dana Rizescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308011

• PDF (1.133 MB)
• References

Open Access

Preventive maintenance features specific to offset printing machines 08012

Emilia Bălan, Liviu Berculescu, Răzvan-George Răcheru, Dorin Vasile Piţigoi and Lucia Adăscăliţa

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308012

• PDF (946.6 KB)
• References

Open Access

Silicone Rubber Used for Lower Limb Prostheses 08013

Daniel Besnea, Alina Spanu, Edgar Moraru, Ghebuta Florea and Mazen Elfarra

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308013

• PDF (683.9 KB)
• References

Open Access

Mechanical behavior of beams with variable stiffness obtained by 3D printing 08014

Laszlo Racz and Mircea Cristian Dudescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308014

• PDF (934.0 KB)
• References

Open Access

Studies on mobile robots for all types of terrain 08015

Robert Florian Pecie, Mihai Olimpiu Tătar and Călin Rusu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308015

• PDF (1.254 MB)
• References

Open Access

Contributions to the development of search and rescue mobile robots 08016

Marton Gyarmati, Mihai Olimpiu Tătar and Francisc Kadar

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134308016

• PDF (2.221 MB)
• References

Engineering in Oil and Gas Field, Environmental Engineering

Open Access

Calorific properties of the wood biomass from some softwood species 09001

Cosmin Spîrchez, Aurel Lunguleasa, Constantin Ştefan Ionescu and Anamaria Avram

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309001

• PDF (584.6 KB)
• References

Open Access

Study of the possibilities to achieve an energy mix in areas affected by restructuring of lignite exploitation 09002

Danut Grecea, Marin Silviu Nan, Cristian Aron, Cosmin Vitan and Bogdan Tomus

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309002

• PDF (1.203 MB)
• References

Open Access

Case studies - Research and technological solutions to prevent sand production in the gas wells from the Getic Depression 09003

Diana-Andreea Lupu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309003

• PDF (915.2 KB)
• References

Open Access

Natural gas hydrates vs. induced dysfunctions in the hydrocarbon extraction process 09004

Diana-Andreea Lupu and Dan-Paul Stefanescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309004

• PDF (1.300 MB)
• References

Open Access

Comparative Analysis of Natural Gas Pipeline Interconnections 09005

Ion Foidaş and Florin Marius Bîrsan

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309005

• PDF (1.284 MB)
• References

Open Access

Physical - chemical interaction of injection waters with depleted gas formations 09006

Dan-Paul Stefănescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309006

• PDF (987.8 KB)
• References

Open Access

Pro and con features regarding underground gas storage in depleted reservoirs versus saline deposits 09007

Ionuţ Lungu, Florinel Dinu, Maria Stoicescu, Silviu Suditu and Ioana-Cornelia Mitrea (Rosu)

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309007

• PDF (913.5 KB)
• References

Open Access

The Petroleum Systems from the Western Black Sea Basin, Romania 09008

Ioana-Cornelia Mitrea (Rosu), Valentin-Mihail Batistatu and Ionut Lungu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309008

• PDF (1.833 MB)
• References

Open Access

Half a century of continuous oil production by in-situ combustion in Romania – case study Suplacu de Barcau field 09009

Gheorghe Branoiu, Florinel Dinu, Maria Stoicescu, Iuliana Ghetiu and Doru Stoianovici

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309009

• PDF (1.190 MB)
• References

Open Access

Aspects regarding the reduction of fugitive methane emissions from the valves 09010

Ioana Petre and Monica Emanuela Stoica

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309010

• PDF (586.9 KB)
• References

Open Access

Using GIS for management of conflicts in natural protected area in Cindrel mountains 09011

Iulian Alexandru Bratu and Lucian Dincă

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309011

• PDF (1.237 MB)
• References

Open Access

Greenhouse Gases Assessment in the Context of the Covid-19 Pandemic 09012

Monica Emanuela Stoica

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309012

• PDF (853.3 KB)
• References

Open Access

Deciphering the Reservoir Rocks Lithology by Mineralogical Investigations Techniques for an Oilfield in South-West Romania 09013

Gheorghe Branoiu, Lazar Avram, Iuliana Ghetiu, Silvian Suditu and Stefan Pelin

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134309013

• PDF (1.457 MB)
• References

Safety and Health at Work

Open Access

Evaluation of the explosion risk specific to the preparation and storage activity of the simple explosive mixture type ANFO 10001

Gabriel Vasilescu, Robert Laszlo, Attila Kovacs, Edward Gheorghiosu, Daniela Rus, Ciprian Jitea, Cristian Radeanu, Stefan Ilici, Bogdan Garaliu-Buşoi and Claudia Miron

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310001

• PDF (703.9 KB)
• References

Open Access

Innovative methodological tool for occupational risk quantification 10002

Haralambie Vochitoiu, Camelia Lavinia Unguraş, Olga Miclea, Bogdan Gaita, Ioan Rus, Gabriel Ioan Ilcea, Gabriel Dragos Vasilescu, Nicolae Iliaş, Dan Dumitru Pintilie and Ciprian Mateiu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310002

• PDF (554.5 KB)
• References

Open Access

The role of an innovative disinfection system based on silver and hydrogen peroxide in infection prevention 10003

Martin Heinisch, Laura Heinisch and Dan Miricescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310003

• PDF (308.7 KB)
• References

Open Access

Considerations on Ergonomic Issues in Physiotherapy Activity 10004

Vlad Andrei Darabont and Doru Costin Darabont

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310004

• PDF (930.7 KB)
• References

Open Access

Shifting towards Proactive OHS Risk Management in Romanian Organizations: Systematic Benchmarks 10005

Roland Iosif Moraru, Gabriel Bujor Băbuţ, Mihai Popescu – Stelea and Zoltan-Gyozo Szabo

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310005

• PDF (666.6 KB)
• References

Open Access

Application of technical measures to improve the work safety - systemic guidelines 10006

Adam Górny

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310006

• PDF (366.9 KB)
• References

Open Access

Assessment of the risk of loss of hearing generated by the hazardous exposures during the work process 10007

Haralambie Vochitoiu, Camelia Lavinia Unguras, Narcis Nicolae Popa, Dan Dumitru Pintilie, Philippe Yves Daniel Huber, Anton Darcy and Gabriel Ioan Ilcea

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310007

• PDF (650.6 KB)
• References

Open Access

Exposure of Workers to Occupational Noxae 10008

Simion Sorin, Angela Călămar, Alexandru Simion, Kovacs Marius and Toth Lorand

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310008

• PDF (309.2 KB)
• References

Open Access

Virtual ignition of a methane leak by electric spark 10009

Nicolae-Ioan Vlasin, Emilian Ghicioi, Vlad Mihai Păsculescu, Marius Simion Morar and Laurenţiu Munteanu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310009

• PDF (1.077 MB)
• References

Open Access

Sizing Particles in Gases by an Advanced Optical Procedure 10010

Dan Chicea, Cristian Leca and Sorin Olaru

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310010

• PDF (455.8 KB)
• References

Open Access

Phosphating Depositions for Equipment’s Used in Explosive Atmospheres 10011

Diana-Petronela Burduhos-Nergis, Adrian-Marius Jurca, Catalin-Mihai Popa, Ramona Cimpoesu, Doru-Costin Darabont and Costica Bejinariu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310011

• PDF (422.8 KB)
• References

Open Access

Selection of Personal Protective Equipment - a complex issue of multi-criteria analysis 10012

Armand-Radu Haraga, Alin-Marian Cazac, Nicoleta-Monica Lohan, Anişoara Corăbieru and Stefan-Lucian Toma

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310012

• PDF (620.1 KB)
• References

Open Access

The risk of static electricity at handling diesel fuel 10013

Mihaela Părăian, Emilian Ghicioi, Niculina Vătavu, Dan Gabor and Sorin Iuliu Mangu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310013

• PDF (791.5 KB)
• References

Open Access

Analysis of non-sparking metallic materials for potentially explosive atmospheres 10014

Romeo Gabriel Chelariu, Costica Bejinariu, Mihai Adrian Bernevig, Stefan Lucian Toma, Alin Marian Cazac and Nicanor Cimpoesu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310014

• PDF (332.4 KB)
• References

Open Access

How to keep your staff healthy in the educational sector? 10015

Mihaela Rotaru

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310015

• PDF (333.0 KB)
• References

Open Access

The importance of performance indicators in occupational safety and health management - a review 10016

Gabriela Caldarescu, Laura Florea, Gheorghe Nagit and Mihai-Adrian Bernevig

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310016

• PDF (614.4 KB)
• References

Open Access

Surveying workers perceptions in the automotive industry - a preventive tool for monitoring OSH measures 10017

Nicoleta Paula Neag, Alin Gaureanu, Nicoleta-Lavinia Calciu and Matei Tamasila

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310017

• PDF (841.9 KB)
• References

Open Access

Recreation and work in an emerging country: a combination of regulatory and motivational influences 10018

Hanna Shevchenko, Borys Burkynskyi and Mykola Petrushenko

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310018

• PDF (362.2 KB)
• References

Open Access

Assessing (Auditing) the Conformity with Legal and Other Provisions in Terms of Occupational Health and Safety of Critical Power Infrastructures 10019

Emilia Grigorie, Nicolae Daniel Fita, Dragos Pasculescu and Vlad Mihai Pasculescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310019

• PDF (757.3 KB)
• References

Open Access

Risks assessment in terms of OHS for critical power infrastructures in context of industrial safety 10020

Dragos Pasculescu, Nicolae Daniel Fita, Emilia Grigorie, Florin Gabriel Popescu and Alina Daniela Handra

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310020

• PDF (892.6 KB)
• References

Open Access

Indoor air quality monitoring and human perception survey on air quality in public buildings in Timisoara 10021

Iudit Bere Semeredi, Mihai Eugen Valceanu, Diana Mihaela Nica, Ella Anca Sipetan and Romulus Corlan

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310021

• PDF (682.8 KB)
• References

Open Access

An important challenge in occupational health: sampling indoor airborne viruses 10022

Diana M. Cocârţă, Cristina A. Gogoncea and Constantin Streche

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310022

• PDF (356.9 KB)
• References

Open Access

Study on the application of the QEC (Quick Exposure Check) on the ergonomic risks assessment in the industrial field 10023

Adrian Ispăsoiu, Ioan Milosan, Dorin Senchetru, Teodor Machedon-Pisu, Ana Maria Florina Ispăsoiu and Cristina Meiţă

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310023

• PDF (1.324 MB)
• References

Open Access

Using new digital technologies in employee training to avoid occupational accidents in the industry 10024

Petru Iulian Muresan, Ioan Milosan, Teodor Machedon-Pisu, Adrian Reit, Dorin Senchetru and Gheorghe Oancea

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134310024

• PDF (336.6 KB)
• References

Academic Education and Management

Open Access

Is organizational skill a will or a way to a successful lifestyle and workstyle? 11001

Mihaela Laura Bratu and Lucian Ionel Cioca

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311001

• PDF (673.8 KB)
• References

Open Access

Stimulating teachers’ participation in lifelong training programs 11002

Daniel Mara and Daniel Hunyadi

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311002

• PDF (390.2 KB)
• References

Open Access

Intercultural competences of students-strategic approaches 11003

Daniel Mara

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311003

• PDF (463.8 KB)
• References

Open Access

Learning and performance evaluation in distance higher education: a case study during the Covid-19 pandemic 11004

Davide Capperucci and Ilaria Salvadori

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311004

• PDF (804.5 KB)
• References

Open Access

Development of a conceptual model of sustainable building from a university 11005

Alexandru Olteanu and Claudiu-Vasile Kifor

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311005

• PDF (1.113 MB)
• References

Open Access

Developing adult motivation for continuous training 11006

Elena Lucia Mara

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311006

• PDF (605.4 KB)
• References

Open Access

The joy of teaching and learning in academia – teachers’ perspectives from three countries 11007

Alina Georgeta Mag, Sandra Sinfield, Tom Burns and Sandra Abegglen

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311007

• PDF (491.5 KB)
• References

Open Access

Embedding bullying related learning in the curriculum for initial teacher education: a possible approach 11008

Daniela Maria Cretu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311008

• PDF (618.5 KB)
• References

Open Access

Using Design Thinking to Redesign the Educational Experience 11009

Lia Alexandra Baltador, Valentin Grecu and Alma Pentescu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311009

• PDF (695.2 KB)
• References

Open Access

Intelligent learning environment for better student’s academic performance 11010

Anca–Elena Vişan, Mihai–Victor Zerbes and Ştefania Kifor

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311010

• PDF (929.6 KB)
• References

Open Access

A brief analysis of eLearning educational services in pandemic crisis 11011

Ioana Petre

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311011

• PDF (614.0 KB)
• References

Open Access

Home ergonomics – lessons learned 11012

Maria-Elena Boatca, Anca Draghici and Alin Gaureanu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311012

• PDF (665.1 KB)
• References

Open Access

Quality management assessment within Erasmus+ Programme according to the perception of the participating students 11013

Rebecca-Clara Răulea and Dănuţ-Dumitru Dumitraşcu

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311013

• PDF (888.7 KB)
• References

Open Access

Aspects regarding skills and education related to Industry 4.0 11014

Felicia Veronica Banciu and Anamaria Ioana Feier

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311014

• PDF (853.8 KB)
• References

Open Access

Brief consideration on the use of the theatre of oppressed in anti-bullying activities in schools 11015

Carmen Sonia Duşe and Dan Maniu Duse

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311015

• PDF (460.9 KB)
• References

Open Access

Multimedia Competencies for University Staff to Empower Manufacturing Science Education 11016

Anca Draghici

Published online: 04 August 2021

DOI: https://doi.org/10.1051/matecconf/202134311016

• PDF (792.7 KB)
• References